Philips HP8560 free download

File name HP8560.pdf

Summer Glow HP8560 Philips Consumer Lifestyle Service Manual PRODUCT INFORMATION - This full-body tanning appliance is equipped with an electronic power supply. This means that when the appliance is connected to the mains, the tanning or relaxing functions are made visible by means of symbols on the display. The set time is also shown on the display. During the last minute of the set time, an accoustic signal sounds. - The UV lamps only burn in combination with the IR (relax) lamps. When the UV lamps are on the IR lamps burn at reduced intensity. - The IR lamps can also be used separately at full intensity for a relax session. - This appliance is equipped with a sound module, offering a selection of four nature sounds. The user can also connect an external music appliance to play his/her own music, either via the loudspeakers or the earphones. - This tanning appliance has also been fitted with a scent unit. The scent granules required for this unit can be ordered as service part (see parts list). IMPORTANT - Because of the brief high starting voltage, the appliance should be connected to a circuit protected with a 16A fuse. - HPA lamps only go on at a restart if they have cooled down sufficiently. - Never touch the HPA lamps with your fingers. If necessary, clean the lamps with a cloth moistened with some alcohol. - When a new HPA lamp is installed, this lamp may have a different colour compared to the other lamp. This is normal and will disappear after a short period of use. - After repair, the glass filters should be free from fingerprints. If necessary clean the filters with some alcohol. - Never look directly into the light of an HPA lamp when it is on without protective goggles. - Insufficient cooling ­ for instance when the vents are blocked or when the fan has broken down ­ will cause the thermal safety cut-out to switch the appliance off. Once the cause of overheating has been removed and the appliance has cooled down sufficiently, it will switch automatically on again. - Let the appliance cool down for 15 minutes before folding it back into transport position and storing it. - Only move the appliance when it is in transport position, i.e. when it is folded. - If there are complaints about inadequate tanning, the output of the lamps can be measured with a UV-X 36 meter. For the minimum values, see table under `Technical information'. Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification 08/03 TECHNICAL INFORMATION Input voltage Input consumption Fuse UVA source IR source Starter Timer : : : : : : : 230 V ­ 50 Hz. Approx. 2200 W 16 A 2 x Philips Cleo HPA SYNERGIE 2 x Philips type 15040R KAIDA KCCD-G400 45 min. (Digital) - Radiation area - Output (min) UVX-36 meter - Protecting goggles - Safety - Weight HP8560 : 190 x 70 cm : 0.2 W/cmІ at 65 cm. straight below the distance indicator : 2 x HB072 : Class II Cenelec UV type 3 : Approx. 19 kg. DISASSEMBLY & REPAIR INSTRUCTION A