File name S9000easysetup_us.pdf

Start Here Easy Setup Instructions S9000 Photo Printer 1 Unpack the Printer 1 Carefully remove all items from the box. 2 Prepare the Printer 1 Remove the shipping tape from the 3 Install the Print Head 1 Remove the print head from its package. 4 Install the Ink Tanks 1 Pull the orange tab off the yellow ink tank the Printer 5 ConnectComputer To Your 1 Turn the printer off. front and sides of the printer. (BCI-6Y), then remove and discard the plastic wrapper. IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Connect one end of the USB cable to the computer, the other to the printer. 2 Turn the print head over, then remove Shipping Tape S9000 Photo Printer the orange protective cap. 2 Twist off and discard the orange protective cap. 2 Plug the power cord into the back of the Protective cap printer and connect the other end to a power outlet. NOTE: Do not touch the electrical contacts. NOTE: To avoid spilling ink, never press on the sides of an ink tank. Paper Rest Electrical contacts 3 Insert the ink tank into the correct slot. (Refer to the color guide on the print head.) USB Cable USB Port Press down gently until the ink tank locks into place. 3 Press the POWER button. 3 Raise the gray lock lever. POWER Button Documentation and Software Kit POWER Lamp 4 Insert the remaining five ink tanks into their assigned slots. 4 Gently slide the print head into the holder. S9000 Print Head Power Cord 4 Open the front cover. The print head holder The print head will rest at a slight angle. Do not press it down. automatically moves to the center. Remove the protective tape. Continue with Step 6 on side two. 5 Close the front cover, attach the paper rest and extend the paper output tray. Ink Tanks BCI-6C Cyan BCI-6M Magenta BCI-6BK Black BCI-6Y Yellow Protective tape 5 Lower the lock lever and gently press it down until it locks into place. Serial number BCI-6PC Photo Cyan BCI-6PM Photo Magenta Write down the serial number located to the right of the print head. You will need this later to register the product. 6 Install the Printer Driver (Windows ) ® 6 Install the Printer Driver (Macintosh ) ® 7 Align the Print Head 7 After the computer restarts, TURN THE 1 Be sure to TURN THE PRINTER OFF before 5 When the Printer Port window appears, M ac in to sh 1 Turn on your Mac and insert the "S9000 W in do ws continuing. POWER Button POWER Lamp TURN THE PRINTER ON so the printer port (connection) can be automatically detected. Setup Software & User's Guide" CD-ROM. NOTE: Screen shots may differ depending on the operating system used. PRINTER ON. Select the Apple menu, then Chooser. Before using the printer, align the print head to ensure the best quality printing. 1 Add a stack of blank paper to the sheet feeder. 2 Start the alignment procedure. 2 Open the Printer Driver folder on the Windows: a. Click Start, then Setti