File information: | |
File name: | Sourcing Clean Voltage Using B2961A 62A with External Filters - Demo Guide 5991-3952EN c20141009 [2] [preview Sourcing Clean Voltage Using B2961A 62A with External Filters - Demo Guide 5991-3952EN c20141009 [2]] |
Size: | 1378 kB |
Extension: | |
Mfg: | Agilent |
Model: | Sourcing Clean Voltage Using B2961A 62A with External Filters - Demo Guide 5991-3952EN c20141009 [2] 🔎 |
Original: | Sourcing Clean Voltage Using B2961A 62A with External Filters - Demo Guide 5991-3952EN c20141009 [2] 🔎 |
Descr: | Agilent Sourcing Clean Voltage Using B2961A 62A with External Filters - Demo Guide 5991-3952EN c20141009 [2].pdf |
Group: | Electronics > Other |
Uploaded: | 05-09-2021 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Sourcing Clean Voltage Using B2961A 62A with External Filters - Demo Guide 5991-3952EN c20141009 [2] Demo Guide Keysight Technologies Sourcing Clean Voltage Using B2961A/62A With External Filters B2961A/62A 6.5 Digit Low Noise Power Source Procedure overview Required instrument and accessory 1. Turn on Show output noise without external filter 2. Show output noise via Low Noise Filter N1294A-021Ultra Banana-to-BNC 3. Show output noise via Ultra Low Noise Filter Low Noise Filter Adapter (ULNF) Objective Keysight B2961A/62A Keysight Oscilloscopes This demo shows excellent low noise output capability 6.5 Digit Low Noise (MSO-X 4000 Series N1294A-022 Low BNC Cable of the B2961A/62A Power Source with external filters by Power Source is shown) Noise Filter (LNF) monitoring the outputs through the oscilloscope. Note: When the filters are attached to the output terminals later, B2961A/62A Power Source push them in firmly until it locks in-place c. Rotate to select Low terminal state and press to 1. Attach a banana-to-BNC adapter to the B2961A/62A's Ch1 There is no space between There is some space High/Low Force Terminals edit it. Then select to set Low terminal state to the adaptor and the between the adaptor and 2. Connect the scope's Ch1 and BNC terminal of the banana-to- Floating. output terminals the output terminals BNC adapter with a BNC cable. d. Press to make the modification effective. |
Date | User | Rating | Comment |