Subject | Text |
| Came across these tips for FL1.10 chassis;
[quote:c70eda226f]
Picture height cannot be adjusted |
| 5 flashes on this set is an auto grey scale error, check setting of a1 control, tubes seem to be fai |
|
Re: need datasheet for this jvc ic | [quote:0994c08ca9="ramjimh"]need datasheet for this chroma ic used in jvc sets.
M52343SP - need d |
L01 | Hi
I have had 2 l01s with this problem, sorry to say both sets the CRT was the cause one boosted c |
Tecnimagen 14TXS - Can't change sound from 5.5MHz to 6MHz | Hi,
It's been a while since I last did sound conversion on a TV set. Living in Spain, I used to g |
re; service costs | Joe, first of all you shouldn`t have stopped payment on his check,
he came to your house as YOU req |
| pioneer tvs are notorious for bad caps, and very bad when it comes to cold joints.
I would suggest |
| THESE SETS WILL GO INTO STANDBY IF THERE IS A FRAME FAULT, START BY REPLACING THE FRAME IC WHICH MAY |
| Hi guys; it´s me again and this time with good news,my vaio A-195EP it´s up and running ag |
| For one thing, there is no lasers in television sets. You have a cold solder connection for the heat |
No signal / rolling screen on Mitsubishi WS-48513 TV | Model: Mitsubishi 48" rear projection TV WS-48513
My family just upgraded their TV, and gave |
Re: Nokia 445 Pro Menu / Brightness | [quote:b384c63bbe="ulahts"]Hi guys,
I have for about 2 years a Nokia445Pro monitor.
All good til |
Goodmans GTV42P3 42" Plasma TV - Power Board Repair | Good Day All.
I have a 3 year old Goodmans GTV42P3 42" Plasma TV, that has stoped working. |
| these sets had a VERY BAD history of CRT board failures something awful.
they also had a history of |
| [quote:3c9c28b759="fongs"]Hi,
1. Does the set power up?
2. Speakers - are they connected prope |
Philips 29PT9418/79G MG3.1A chassis problem | I wonder if anyone out there can help me with this one, I have recently got an Philips 29PT9418/79G |
need datasheet for this jvc ic | need datasheet for this chroma ic used in jvc sets.
M52343SP - need datasheet |
|
E/W fault. | Most of modern sets store the geometry settings in a memory IC (EEPROM). In your case it is almost 1 |
Mitsubishi Black Diamond BDS2851WS | Many thanks Gary. You are spot on. The set is 11AK19 PRO and downloaded the schematic and doesn't lo |
re; toshibas | Hey guys, your english is great as far as I`m concerned, One thing
I forgot to mention is the color |
Philips #27PT6441/37 Will Not Turn On! - UPDATE!! | I finally took it in to a shop for repair and saw [b:2d120d15d9]FOUR[/b:2d120d15d9] sets JUST LIKE M |
Are LCD tv's designed to be repaird? | I have several LCD tv's for repair, and im finding it impossible to get spair parts, i have 3, 9inc |
Re: Viewsonic N3245W Black Screen - Need some help | Today, I received a replacement inverter PCB that I ordered from ShopJimmy.com. Smooth transaction, |
SONY TV TROUBLE | HELLO, Well it's true that your standby supply is working, however you will most likely to have a ba |
| [quote:e6cf77ceae="jts1957"][b:e6cf77ceae]see if there's an "add" and "erase" bu |
| Orion Made chasis"TMA528C" used on several funi/symphonic sets-- which is not listed anywhere in To |
About Flash drive. | The great featured with small storage device that can be used to transport files from one computer t |
| I have repaired a lot of these sets and sounds to me that you need to replace both the str ICs if al |
Wharfedale 890 - PT92 Chassis | I have one of these sets, which is not responding to AV control signals:
Firstly, it does not ent |
Re: Code SEAT radio ALANA | [quote:11d5633274="radiogan"]Hello, after disconnecting the battery radio sets "SAFE" and |