Subject | Text |
jvc th-m505 fixed a no power now no bass | first of all im not the best as testing components. i dont have as much experience and i tend to nee |
Re: ONIDA KY bass not increasing more than 45 | [quote:1799e0709f="Abhishek"][quote:1799e0709f="Ayyanar"]How to increase the KY bass level. In our T |
|
Rest code cd canon pro 9000 mark II | Rest code cd canon pro 9000 mark II
and canon 4850
to rest ink pads and have contact with printe |
KY Bass level | hi,
it could be done by remote of ur tv set. its not simple because i am also trying the same for t |
Pulsating Bass In TV | Recently my TV has started to give out a constant wave of bass, about once every second. Any ideas w |
Bass Pedal YAMAHA BP2 | I need schematics or any info about [b:0c91385d7a]Bass Pedal YAMAHA, Model BP2.[/b:0c91385d7a]
Many |
ONIDA KY bass not increasing more than 45 | [quote:9cf032a6f4="Ayyanar"]How to increase the KY bass level. In our TV the KY Bass level is just 4 |
marshall 3530 bass guitar amplifer - need schematic or psb | Hello
I'd like to build this amplifer. I found something:
http://www.drtube.com/marshall.htm
(psu |
| Ok so here is where the dumb questions start....
What are the output IC's?
Where should I be t |
Req: JVC HRS5950 VCR Diagram or deck nr | Hello,
Can anybody upload the schematic diagram for the JVC HRS5950, or tell me the deck number.
|
| It sounds like the primairy side of the power supply isn't starting correctly.
As you allready me |
| Try changing your PAL/NTSC setting in de "video-setup" menu!!
That should help!
Grtz Mark |
Samsung SP42W5HFX (J52A chassis) Projection TV | Hi,
I'm looking for a schematic diagram for:
Samsung SP42W5HFX (J52A chassis) Projection TV
|
| Hmm, I'll gues I mixed up the autocoupler and controller IC, my english isn't a 100 %, sorry :lol: |
| A fuse almost never just blow, without a cause. So just replacing them without repairing the cause i |
Universum DVD-DR4342 | Hello. Is there any service manual for this item or could you tell me is there any possibility to ad |
Aiwa NSX-330 mini system problem | Hello,
My Aiwa NSX-330 system was working ok, I was mainly using it as an amp for the only line i |
|
| Thanks for the succinct answer. That is what I had thought in the back of my mind, though now that |
| Thanks Mark, You were right. The two 5 Amp and One 2 Amp were also blown. Replaced and at least got |
MN101C51FFA: microcontroller? Can somebody offer some help | Hi guys!
OK, so after I followed Al_Dodge_Bundy's advice (thanks again Mark!), I think that what |
| Sometimes, cleaning the laser will resolve reading problems...
Don't know if you've done that alr |
Bose companion 3 Amplifier Schematic | I have a Bose companion 3 Multimedia system. The Bass quit working on the system and I have the serv |
manual | Hey I would appreciate a copy of the manual for the SA-GX330 as well.
I need some more bass and am |
Re: Looking for JVC MX-D401T service manual | [quote:8e12a9bff2="Al_Dodge_Bundy"]Hi,
I'm looking for the JVC MX-D401T service manual.
If som |
| dear mark thanks for help. I have seen those 2 faults you wrote.
1. In one Tv i got sound ( |
| Check if there is a NiCad/Li battery on the mainboard somewhere.
If there is, it probably lost it |
Service Modes | Manufacturer Model Chassis Product Mode Enter
Akai CT-2119 CTV Test Mode
Simultaneous press + & |
| Hello Georgio,
Found this on the net (for use when Pin-code is not known)
PRESS VOL - ON TV &a |
| thanks for that Mark! |
H.P CSN EMEA Site: Serial / Productcode match question | Due to the fact that many customers only supply their s/n, when loggin a service call, it sometimes |