Subject | Text |
Renault Code | please code radio
MODEL: 22DC/461-62 T
FD1199406171430
7 700 433 946
THANKS |
| sony tvs suffer from dry joints and they usually hide inside the metal canned units .but from what y |
|
Sony | Bad solder joints are a common problem with Sony TVs. Look for cracked joints around any heat produc |
please help! need ONKYO owner's manuals and/or advice... | hello, i just purchased a very nice onkyo system for $50 but couldn't get the manuals..( yes $50!!! |
SAMSUNG TV MODEL CB5012Z | I NEED:- SAMSUNG TV CB5012Z
1) TV SPECIFICATION
2) LISTS AND TYPES OF COMPONENTS
3) ISOMETRIC DRA |
| Looked at the blue ceramic caps -- only saw two small ones; but, they look ok. Will need to get und |
power supply question | Hi
when you say primary of the power supply, what specifically?
Is this a switching or linear |
STR-DE598 no display from using wrong speaker (dead) | hi , new to the forum but hope som1 can help , got this str-de598 from a friend who clams to have pl |
| Speakers and wiring are good. The distortion is there regardless of input - whether internal (tuner) |
| [quote:9178dc8f71="wwiiflyer"]Looked at the blue ceramic caps -- only saw two small ones; but, they |
| There is a useful general purpose timer chip called a '555' - you can use a microswitch (ask a sales |
TV SET REPAIRS | :D If you are in any doubt as to your ability to undertake any tv repair-dont!!!
There are certain |
Please Help Harmon Kardon surround amp power problem | Hi
Please help i have a harmon kardon AVR630 surround amp. Ive had the unit for about 12 months a |
Re: Renault RADIOSAT 6010 code needed, please help | [quote:962cdd689a="skubi"]Hi,
I've got old Renault Megane with blocked RADIOSAT 6010 and have no c |
Oscilloscope | Thanks vtech,
I will follow your suggestions.
I'm pretty sure it will get sorted.
BTW, I found th |
panasonic tx-25md1 | Hi
With regards to the lines at the top of the screen if they are really faint and only seen in dar |
N2751w | I have an old Viewsonic N2751w with the FSP212-3F01 power supply. Recently, the TV died. There are |
|
| The power supply is probably bad and it makes 3 attempts at power up and goes into safe mode to prev |
about your tv/vcr... | by this time you probably junked it or got it fixed but im looking for schematics for mine and saw t |
| Start with a good visual examination of wiring, check boards (especially area around the audio circu |
need help | Hi
Dir need circuit diágram. power supply complete blown out can not read components , please |
Sharp TV clicking. | Sounds like a SMPS (Switched Mode Power Supply) fault. The problem with these power supplies is that |
| Thanks for reply, adamij.
Will check these components when I get home! |