| Subject | Text |
| LCD TV 170ASW | Hello,
No problem with on screen menu, it will stay on forever, responds to remote control comm |
| I've plugged my Sky box into it, but that doesnt change anything. I'll try my antenna ariel this mor |
|
|
| philips lc 4341 projector | hi
has anyone come across the lamp driver assembly for this model,
have tried new bulb but get n |
| Hi ,thanks for the reply. The video head part number is A7049530A which was originally a replacement |
| Just Opened it Up | I just opened it up. Too bad though i was referring to the manual in print. The quality's not that g |
| Isolation between antenna network and TV/radio equipment
A ground loop in your AV system caused by |
| A TV that's effectively DEAD - even connecting to the best Antenna/Cable/Satellite signal won't caus |
| DYNEX LCD TV | I have a brand new Dynex 26" TV. I had the thing hooked up to a digital antenna and just recent |
| Re: yamaha RX-V1800 | [quote:e5feb97d31="[email protected]"]I just had my RX-V1800's dsp assembly changed as what the yam |
| Re: Dell Lattitude C600 - Wild cursor | [quote:2cca941a6a="jimenvais"]The cursor on my Dell Latitude C600 usually behaves at first, using ei |
| The high voltage dropped by more than 20%?
The Screen/Focus assembly went bad?
The set is showing |
| Panasonic CT-Z2151LU chassis AEDP267 | This tv both with antenna or cable the image vibrates and the letters duplicate all channels. any su |
| Toshiba 3377DB TV tuning problem, please help | Thanks for the kind reply. I have tried the method and color problem is solved :D .
Now new probl |
| 50P8341 shuts off when place in AV mode. | I have a Philips 50P8341 that if I put it on one of the AV channel like AV1 or CVI,AV2 or AV3 it shu |
| 30 screws! Thought you were a tech.
In order to get to the other end of the cable, you would need t |
| Magnavox 50MF231D intermittent power | Think I have similar issue? Unit powers up, green led's stay lit in back of IR sensor and center of |
| DVD player won't play CD's | Hello, I have a Marantz DV-9500 DVD player and it plays everything fine but CD's. I have changed the |
|
|
| Reset to factory settings - CRT Toshiba TV to fix problem? | Good Day,
I'm trying to give a Xmas present to a family member. He lives in the country and has per |
| Re: looking for service manual MITAC 5026 Notebook | [quote:9e850a469c="matchap801"]Hi. I have a machine with the 8640 case. I want to take it apart to f |
| sony very very bad reception. | sony tv kv-29fv1. antenna have static. reception very very bad,almost a raster. video mode okay. |
| CD READING PROBLEM | The other gent meant the laser assembly or the motor that spins the disk as being under suspision.
|
| PS, if you are wondering how I was able to buy the assembly seperately.
It was from these guys here |
| [quote:da1c2d302b="jts1957"][quote:da1c2d302b="jts1957"][b:da1c2d302b]see if there's an "add&qu |
| Hmm...I've measured resistance for both the signal wire and ground wire all the way from the stylus |
| Almost certainly there is an internal fault/s- all you can do is check power ok, antenna ok, then fi |
| 50" zenith tv convergance issue | I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, |
| Re: Goldstar Breadmaker | [quote:b57b9eb00b="swiddle"]gear assembly underneath the bottom of the baking pan has worn. I will |
| okidata c5100 feeder unit disassembly | I started to print out a couple of laser cd labels before I remembered I had only 1 sheet of cd labe |
| Pinout DEH-780 Pioneer Install | __________________________________________________
__________________Inquiry_______________________ |
| Go into the menu and switch the tuner to cable not antenna. Ant will only go to channel 69 where cab |