Subject | Text |
| the truble happens only if there is a signal in the "ANTENNA", with no signal the tv works good. Bu |
| Hi minnie
I have tried the speakers. I opened the back and disconnected the current speakers of t |
|
Blaupunkt Alfa 937 High tuner problem | Hi. Please help me, i have problem with tuner. tuner not have signal,seeked stations. have a new pow |
| The problem is not a tank at all. Almost the whole of the bottom of the printer is covered with an a |
| pm me with your email address and i will send you the assembly instructions |
Aiwa Cassette deck AD-WX828 | Ok guys got this double deck in for repair it only needed a head replacement, on assembly it now doe |
car electronic problems | I bought a 2004 camry recently and it came wit a sirus satellite system, navigation system, and dvd |
RCA TX809 | I have this RCA TX809 and most the times when i want to change signal type UHF/VHF Antenna/Cable cha |
Pioneer AM/FM Home Tuner model TX-960 | Hi,
I'm looking for schematic diagrams, particularly with DC voltages included, for a Pioneer dis |
updates... | Ok, I've since disassembled the set and found another label at the top of the CD transport:
"TCM1 |
led moving sign | hello
i m studying electronic engineering at Turkey.
i want to sell led moving signs. forexample |
Need advice on fixing a NEC 4210W Plasmasync Monitor | I have a NEC 4210W Plasmasync Monitor (Model PX-42M5A) that has 2 bars, one black, one white, going |
| TV is on cable enstead of broadcast or local antenna.
On cable setting the uhf channels are in th |
| You already have checked your antenna plug and cables for loose/broken connections, I am sure. :)
C |
CUC4400 intermittend no tuner signal | On my grundig P40-440 CUC4400, the tuner signal sometimes disapearjavascript:emoticon(':evil:')
Evi |
Help 4 u | This problem is almost always a dirty open contact switch with various positions on the bottem most |
Goldstar Breadmaker | gear assembly underneath the bottom of the baking pan has worn. I will buy a new pan or replace the |
|
Re; Checking "lenses" | I presume you mean the Laser.
All CD / DVD units have one (sometimes two) laser assembly. Generally |
Trouble with commercial LCD (Philips 20FT3310/37) | Hello all I am new to this forum. I am an IT guy, so I can usually find my way around a television p |
TCR-483 CB Radio service manual and schematic sheet | Hello; :)
I'm new to this site. I'm looking for any [b:f1cb69c322]Service Manual[/b:f1cb69c322] |
| Thanks for your input. That's right, but my experience has been that it doesn't matter if it's VHF o |
Sony CDP-cx200 Player keeps skipping. | Hello everyone, I have a CDP-cx200 home audio cd player and the player keeps skipping after a few se |
panasonic SA-VK82d Disc `5` flashing `Change` | [quote:521fc61ed2="jts1957"]Disassemble - Clean and lube MODE switch - Reassemble (Timing mechanisms |
Pioneer SMQ300B | I have a unit in bad shape due to rat infestation.I had to resort to complete dis assembly. Hoping |
| It's most definitely a connection problem in the filament circuit for the crt for the fading problem |
| Check out if you have the same interference when you are receiving by antenna, too. Check if you can |
| Sorry to hear that. That is awful!--nothing short of highway robbery. Not sure how it operates in Au |
diagram or plan of HP R707 | hello
with all I am has the research of the diagram or plan of
assembly of the r707 for a repair |
Good News! (I think) | On closer inspection the other day I discovered the spring which holds down the white plastic assemb |
JVC HR-J217MS VCR - no color recording | Hi,
I've the above vcr that works fine except it wouldn't record in color. ie. picture recorded b |