Subject | Text |
Please Help with APEX GB5108 | I have a projection APEX GB5108.The top half of screen is working perfectly, the lower half does not |
| joao2004 I am waiting detail |
|
| I do actually have all the related boards/parts. One of my jobs is repairing printers/faxes/scanner |
| Have been out of consumer electronics for some time...I used to see this problem on a regular bases |
| Lol, I remember doing this as well. I'd crank the volume up, lick my finger and touch the pcb around |
Panasonic SD-P5073-K | The top half of my screen is not bad, but the bottom has a blue gun bowing
about 1" high on the en |
panasonic tx-25md1 | Hi
With regards to the lines at the top of the screen if they are really faint and only seen in dar |
Hitachi 50UX58B | MY WAS WATCHING HITACHI MODEL 50UX58B AND IT WENT DEAD.
I CALLED HITACHI TV CO. THEY GAVE ME THEIR |
| I carry thinkpad service manuals but the type of information you want is not included in them. There |
Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
nikon d50 | good morning
I have my nikon d 50 that will not turn on I disassembled and I realized
that does |
| :D [b:3aa7d40ba5][i:3aa7d40ba5]send me an em,[email protected]
also give me full model nr and t |
Philips LCD 37PF9986 or 42PF9986 | I am looking for the service manuals for these Philips LCD televisions. Chassis is EMG Top. |
picture light to dark and back | Hello there. Toshiba Cinema series Model CN27C90. Occasionally when I first turn it on the picture l |
help with fixing my TV GE model | I have a ge model TV and it is a couple of years old,The connector that screws into the cable line t |
| Another detail,
the red catode tube plug (on the PCB board) seems to be discharging inside - on the |
Re: Urgent help! corsa d delphi grundig stereo | [quote:be0082eeb5="robswarbrick"]Hi all, please can anyone help with my stereo, its DELPHI GRUNDIG C |
|
| 1) Resolder all the output transistors solder joints and any other intermediate transistor stages th |
| FYI, the ABxxx error codes on first generation Philips dvdr's have no real meaning & it's genera |
@Larry | Larry, thanks for the remark. I will check the connections of the ON4409 (horizontal output driver) |
| I found a picture of the board online. This board is selling for $180, but the same caps that were |
Denon cd draw failing to open on ud-m3 | :lol: :lol: :lol:
Smiles all round.Many thanks fatz 2000 for taking the time and effort to suppl |
| Hello !
One more detail : the reference of power supply board is EADP-64AF B (DELTA Technology). |
TV thomson ICC11 (63DF89L) shut down itself during few sec. | My TV thomson ICC11 (63DF89L) shut down itself brusquely, the red LED on front panel also led switch |
| Not familiar with the specific set but you are looking at it correctly provided there are no other e |
| Well I will repair the boards that people send to me but I want to sell working boards as well. It |
| I am not an expert but to my knowledge you probably won't get a shock from the flyback. The wire and |
| [quote:7f8e6bc067="tsgunnell"]on the flyback transformer the top control is the focus control adjust |
| IF THE LINES ARE VERTICAL IE TOP TO BOTTOM THEN VERT STAGE IS OK AND FAULT IS IN LINE, UNUSUAL TO GE |
more on laser replacement | Thanks for the suggestions--
So I removed the new laser and inspected it closely. During my curs |