Subject | Text |
| I assume you have atleast two drives, C and D. I also assume that Win XP is loaded in C drive. You c |
check | if you have a multimeter ...check the output voltage ot the adaptor... be shure for right connection |
|
| Not sure if I follow you?
Are you trying to charge a battery(cell phone) by hooking it up to anot |
| 1) They are (again) reducing the "spectrum" that broadcast television uses (remember a few |
10nf, 4kv Disc Capacitors? | Anyone know a source of supply for 10nf, 4kv disk capacitors in the u.k?
Many Thanks |
Skipping CD Changer, Likely Cause? | Skipping CD Changer, Likely Cause?
I have a Denon micro system with a three CD multi changer that |
| Oh, if u want to add more fans to the same power source, u should connect them in parallel:
12v + |
| In general the rating of the replacement supply should be the same(or more Current--wise) as the ori |
| HDMI jack on the ATT HD receiver is an OUTput...
The Component jacks on ATT HD receiver are an OUTp |
| I had the same problem after I put in an unbranded disc. I over came it by forcing a reset by pressi |
Re: DCR-PC101E | Download the service manual by visting the follwoing link:
http://micro-tek.co.in/forums/index.ph |
| Most meters will measure up to around 2,000 volts as is. With the proper adaptor(s), the sky's the l |
Re: monitor | [quote:565f3988bc="andy j fry"]i have a monitor but with no makers name on it ,only the model number |
Panasonic Digital Video Recorder | Hi,
I am looking for a service manual for one of the newer Panasonic DVR's with an internal hard |
| Guest:
First, thanks for the reply. No, the CD ROM does not slide out the front side, it is inte |
| This option may only show without a disk inserted. |
| :roll: dvd player has 2 gain control / separate trimmer for VCD and DVD .,remove disk , close the tr |
|
| i put in the new drive and bios cant detect it but when i put the startup disk in and start with cd |
RB1 Navigation Repair | Hey I have a RB1 unit that the DVD/CD player has quit working.
The disk seems to rattle then I get |
astra console display | hi, wonder if anyone can help...after replacing my mk.4 astra stereo with a better one, the temp/ ti |
Help! Infocus IN76 Projector Repair (HDMI & DVI port fai | Hi,
I have an Infocus IN76 DLP projector. As there is only 1 HDMI port I bought a HDMI switch wh |
| you have problem with lazer lens contack , you must first align the focus in-order that your unit ca |
Computer shuts down abnormally! | I have a custom built pc that I've basically built myself. It was running smoothly until recently it |
| I don't know your particular computer but most fans are speed controlled to the temperature. As the |
Sharp VL-C670 | Service manual / schematics needed! haven't opened camera yet, but I suppose an "elko" / cap problem |
| Thanks Vtech and Jts, good adice.
I'll first try measuring the amps comming out of the power boar |
Analogue radio repairs | Radios for hard to fix radios
GP300:
Fault…. Doesn't turn On (Dead radio)
1/Check Fuses
2/Resold |
FOUND: Executech, DigiTech, HoTelephone, Americom manuals | Looks like I posted this in the wrong place first, moderator, please ignore or remove from ther othe |
| apply 3V to the spindle motor leads. Many times the whisker brushes in these motors fail due to the |
Motherboard with no VGA Display! | Good day Everyone!
What would be the primary cause of this problem? cpu fans are running/motherbo |