Subject | Text |
Touch Switch And Delay Circuit Using 555 Timer IC | http://www.electronic-projects.co.cc/?p=37 |
KX-F90 | I am looking for documentation for KX-F90 Panasonic fax machine. On the display appears E-30 error m |
|
harman kardon | New member, so i hope this question is being asked in the correct forum :?
I have just been lucky |
Westinghouse LTV 32 Fuse Problem | My westinghouse ltv, which I use as a computer monitor, stopped working after some sort of power sur |
| [quote:0921a0d32b="B00N3"]Sorry for the delay, I was waiting for a buddy to let me borrow his solder |
Re: Code for Chrysler - Alpine P05064385AF | [quote:130b81df23="salvatoresalvatore"][quote:130b81df23="forumowisko"][quote:130b81df23="salvatores |
program 24c16 samsung CS29M20MH | hi all members
i have TV SAMSUNG CS29M20MH, a days ago shows menu service instead of the normal pic |
Re: I dont hear anyhing when i hit the power button. | That is a ceramic time delay type fuse T6.3AH250V which should show about zero ohms if good.
What |
| I seem to think it'll be a 20mm standard fuse, you need to be sure if it's a 'quick blow' or a delay |
Oscilloscope Unaohm G4030 | Hi! The delay time base of my oscilloscope G4030 was broken, and i need a scematic diagram to repair |
convergence ic'c | [quote:28b0decb2d="K"]Well, if you are still trying to solve this .... get some "slow blow" 3.15A fu |
Hitachi TV Model C2544TN | I have a hitachi tv model C2544TN which is exhibiting the following fault:
when the set is turned o |
Re: Radio code for old Philips | [quote:64795efc9c="_Franky_"][quote:64795efc9c="jashan"]Hi all,
I have an old philips radio casse |
| Have you checked for bad solder joints etc around the chroma IC? Also, check the signal levels befor |
| same issue ,iiyama e2208hds, blue led flashing, delayed display on boot (10 minutes delay), capacito |
RCA RT2870R receiver | About ten months ago, I bought a new TV, Blu Ray and a Wal-Mart special receiver/speaker set. The sp |
Sony Kvx2982u, (BE-3B chassis?) fault | Dear friends,
I have recently bought the above set second hand, upon powering up the TV I have no |
|
| Hello Eduardo.
First of all, I apologize for the delay in my response.
I understand, since you are |
| cant easily be done, would involve building a circuit that would remotely activate the record and st |
Re: KX-F90 | [quote:6bed6ed50a="dido"]I am looking for documentation for KX-F90 Panasonic fax machine. On the dis |
| Sorry for the delay, I was waiting for a buddy to let me borrow his soldering gun. Is it really nec |
Nec PX42VM3G | Hi dooney
sorry for the delay.
As regards the service account, my engineer asked to setup a servic |
| I am thinking it maybe the delay line, does anyone know which component this would be or is it conta |
| Resolder delay line DL302. |
| [quote:4f5644abc6="yohan"]same issue ,iiyama e2208hds, blue led flashing, delayed display on boot (1 |
Contactor coil for 12V DC | Hello all,
I,m looking help for contactor coil which mention 20V/50HZ and 24V/60HZ,i wish to use th |
| Well, if you are still trying to solve this .... get some "slow blow" 3.15A fuses which may delay th |
| :?: Testing resistance on 300 mill volt setting on a fluke VOM! Not sure I understand? Need to meas |
| Hi Raj,
Thanks for your reply. I powered up the amp and checked the voltage across the relay and |
no color (14gr1221) | hello everybody,i find problems in repairing 14gr1221:no color though i replaced PAL chip ,delay li |