| Subject | Text |
| 300W ATX PSU CHIRP...CHIRP... CHIRP... SOUND ON STARTUP | I may rate myself as an intermediate in the field of electronic troubleshooting. Hopefully somebody |
| NEC 50MP1 no picture on startup | my NEC50MP1 on start-up gives no picture or graphics. after 5-10 minutes i turn it off and back on |
|
|
| Now the USB Port Has Stopped Working! | My investigations lead me to trying the WAC3500 with either or both of its drives (DVD-Rom; hard) un |
| Metal detector keep alive circuit not working | I am new to this forum so please forgive me if this is too technical. I have an old Whites Eagle me |
| Start by checking the largest transitors near the flyback trafo (called HOT, used for H-deflection a |
| JVC Kaboom Cassette Player problem (RVB90) | I have an older JVC Kaboom box (RVB90) and the cassette/tape player keeps breaking. I rarely use th |
| Could you check if the PSU is squeeking, due to a short in the primairy side of the mainboard?
Of |
| akai ct-t21n32s fault wont startup from standby | cure: replace eeprom IC602 ref
Peter |
| CUC2500 (T70-1020A) start-up problems | [quote:e6c2501c40="Anonymous"]I don't know this chassis but I had once similar problems with a cuc55 |
| Re: TV SONY KV-28-fs65u don't start-up | [quote:6e3f72e081="Garrido"]When power on, the led lights for a short time. Can you help me? Thanks. |
| Daewoo P42SM Plasma startup issue | I have a Daewoo DP42SM and when I first turn it on, there are horizontal interference lines while it |
| Daewoo DSC3270E startup problems | Sometimes my Daewoo DSC3270E tv set won't start, it displays 2 Red lights, OR a single orange light. |
| Hitachi C32W510SN No Colour on Start-up | Thanks Minnie
I have carried out your recommendation by playing DVD through AV1 and the fault is st |
| Changing startup logo on Optoma projectors | Hi, I would know if anybody has already change the starting up logo on Optoma DLP projectors. Thanks |
| TV SONY KV-29C3E don't start-up | When power on, the led lights for a short time. Can you help me? Thanks. |
| keyboard on packard bell causing startup failure | i have a brand new packard bell easynote, modei Argo C2.
MS-MODEL:ARC21 IN 003D;;;
SOMEONE IN MY |
| Hitachi C32W510SN No Colour on Start-up | On switch on there is no colour and what appears to be poor quality picture. Switching on and off se |
|
|
| TV partially black screen at startup | My 21" philips TV at home when switched on, starts with almost half of the screen (bottom half) |
| try to flash it using twister flasher/ufs3/prodigy/neelix3/pbb or whatever box u choose.
if still |
| Philips 25PT4501 won't turn on. LED's blink... | I have a problem with my Philips TV. The damned thing won't start up. This is what happens:
1) I |
| RCA Projection TV - has sound, OSD works, but no picture. | I have already repaired one problem with the set. It was recently moved and a small amount of coolan |
| Just perform generic checks.
First make sure it has no blown/bulged electrolytics.
Are fuse(s) O |
| Phillips matchline IDTV Fault | Hi There Folks
I have a Phillips matchline IDTV 100 Hz Digital scan set.
The symtoms are : Turn po |
| Samsung Service Mode Suggestion | 1. Enter the Factory Mode. Press the remote-control keys in this sequence:
PICTURE OFF(RED KEY) - D |
| By the way, anyone else got other suggestions or experience with this set?
Besides suspecting ver |
| Faulty Black Diamond Tv | Not sure but it may be AK19PRO chassis. I copied and pasted fault info on AK19 series below to see i |
| Maybe some other teck lifted the cap on purpose so he didn't have to go through the tedious process |
| How to enter service mode on Goodmans W322NS, board F19 | Can anyone advise me of the way to get into the service mode on this set? :oops: I have the remote |
| Magnavox PIP TV Manual | I am looking for the owner's/instruction manual for Magnavox 25 inch PIP tv,model RP2541 C401.I don' |
| Your best bet is to try figuring out who made the unit & get an owners manual.
While I'm not |