| Subject | Text |
| FSP 300-60PNA(PF) Power supply units | Hi Everyone,
Can anyone help me as I am desperatly trying to find the schematic or circuit diagram |
| Venner Plug in logic units | I have a box of assorted units and manuals - free to anyone who wants them, about 15 or so. Or they |
|
|
| Need suggestions of multitest units like the elenco mx-9300B | Incase no one knows what this unit is, http://www.esssales.com/elenco/all-in-one.html
I need a te |
| I don't habve any specific IC to recommend.
But check out
http://www.electronics.ca/reports/mu |
| Hello Bob
I only have a NEC PX42VM2 on cd
NEC & their distributors will no longer supply |
| Made by Panasonic, used to work on them and one of the better made units.
Is the disc free to rotat |
| Awia ribbon cable connecters | Please, please, can some one help me. We have got an awia NSX-AVH9
Hi Fi. There was a slight proble |
| sony tvs suffer from dry joints and they usually hide inside the metal canned units .but from what y |
| If you really like the unit, then take it to a shop and have it fixed. My opinion and service histo |
| Wasjust looking over vtech's shoulder andfound a generic schematic to a power supply that should be |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| Re: Code for Ford 6000 Single CD-KW 2000 | [quote:19a0e3af69="obshtia"]Good morning,
Would it be possible to get a code for:
Ford 6000 S |
| Why not just take it to a pro?It sounds like you dont work often on electronic units. |
| Not possible/practical--- w/out major modification. Capacities of all their units are software cont |
| Look at Farnell or RS Components. They have several series of high voltage ceramic capacitors, but a |
| Wanted: NEC Turbo Duo repair help | I'm not sure if anyone here works on video game systems but I'm hoping to find some repair informati |
| Here's how I got Phillips' attention | Hi all,
Sorry to write again, but I've got a very useful update... My 27PT6441/37 had the same p |
|
|
| Not sure if I followed your connection, but as a general rule of thumb, every time the DVD video is |
| bad news, i have had this a couple of times and the cure was to replace the lcd panel, there are a c |
| Wanted - Sony UP-D8800 service manual (and or help) | Hello All,
I am desperately looking for service information and especially a service manual for a |
| DTK CDD1401 and Markvision VC4968NI Monitors | I need service manuals or schematic diagrams for two old monitors I am trying to repair. They are a |
| What about units that wont power on? I assume from the previous post that the main cost in a flat pa |
| Majority of the codes have no real meaning on philips units. Basically it is some sort of communicat |
| What you are describing is identical to the issue which only affected the DVD operation cycle but I |
| SUBJECT: DIGITAL CONVERGENCE ADJUSTMENT MODE ACCESS
Details:
In the past, when the technician need |
| Re: AVC | [quote:23d123f2da="jts1957"]What is AVC?
I'm presuming power strip or surge protection?[/quote:23d1 |
| Denon DN-2600F Cable Pinout | I need to make a replacement interconnect cable that goes between the two units. Could you pleas oh |
| On closer look, obviously the spindle is of a different type that I originally thought. (Hall effect |
| [quote:3c401903bc="minnie"]By the end of the year vcr’s will be extinct. DVD burners have come down |
| [quote:52c49ffcc4="Kossta"]Excuse me. I also need code for VDO CRD 500
GM050011217145.
Thank you |