Subject | Text |
yamaha rx-v490 Reciver problem. 1st power on clicks clicks.. | I have had this reciever for a long time, worked great till about 3 months ago. Now when it is turne |
Microwave question | Hello all,
This is my 1st post but I have looked at this great site but can't find any info about |
|
Re: Horiz. out | Be sure to check driver transformer solder joints.
Just looking at the 1st Sony manual I had layi |
Samsung TV (SP42W5HFX/XEU) - Convergence Problem | Anyone with any advice on how to fix convergence problem on a SP42W5HFX/XEU rear projector tv?
C |
Re: Renault Radio Code Help | [quote:ffc9de8af9="Dekster"][quote:ffc9de8af9="forumowisko"][quote:ffc9de8af9="seke123"][quote:ffc9d |
| dear mark, thanks for the help, so
1st Item. I am not seeing any difference, but when power is |
| [quote:4329f6d569="jts1957"]RESISTANCE across C32?
Resistance on Pin 9 of CN2 the WIRE that connect |
| Hi Mark thanks for ur clear & wide advice, I realy appriciate it.
1st Item, I had power ok. |
vert or horiz problem? | 1st - It's JTS1957 / NOT JTS1975. Oh, to be 18 again! How did we get from a discussion of a Vertical |
| Mr Gunnell - you were 100% correct! :-)
Afrter reading up on how to desolder old circuit boards, |
| Hi.
Ans 1: It is not recommended to use a power adaptor that has a different rating; especially s |
| [quote:fcb0f223cd="fongs"]Then u could be having a bad transistor, dying up capacitor or bad groundi |
panasonic kx-tes824 feature programming | i need help to colines serial like when we press 9 to get 1st line next time line 2 when we press 9 |
| ok..1st try resoldering the vertical section for possible loose connection 2nd try replacing capacit |
| Aslam O Alaikum,
Dear Zahid, 1st thanks for replying but I have alredy replaced its EEPROM (MEMORY |
| sir/maam... sony has 10 blinks no video...just because the sysytem cannot detect the video signal c |
Screen fixed :D | Hi all, to be short : The screen is already fixed :D
I couldn't resist to do some solderworks, s |
|
important tips for tv suffering weak picture tube | for tv sony or japanese brand tv even us or european suffering weak emission of picture tube can inc |
| Ive just looked at a friends Ford stereo manual and it would appear that the screen is ready to acce |
DLINK ROUTER | hallo!
I've got a DLink router to repair.. I used the wrong power adapter (12V instead of 5V) and t |
| so it could be the control IC, can u give me some ideas about that IC's function & it's cause's |
| EP heads fail 1st, then SP. :wink: |
Re: panasonic tx34p300x | [quote:20a6f311b6="a_man"]help me any one please
i have this tv with 2 wrong things now
1st no sou |
| Hi thanks for ur clear & wide advice, I realy appriciate it.
1st Item, I had power ok. but |
| [quote:6e7cb89d10="gary"]replace c1260 in psu section, 1000mfd 10v[/quote:6e7cb89d10]
could u be |
| Thanks guys. I managed to get the PSU out of the projector case but still plugged in "enough&qu |
| Ok, here is an update
Spoke to Tiny £1 per min told me to do a factory reset on the plasma,
|
TDA 1085C Microcontroller for speed of asink. motor | Hi,
My name is Nedjeljko; I have one problem with this regulator of speed for asynchrony motor: : |
| [quote="vtech]
There is also a reference of EI-35 for the transformer in the parts list which |
DX-LCD32-09 | I too have the same problem, 1/3 of the TV works at the top and the 2/3's is just lines, exactly lik |