| Subject | Text |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
| Sony XR-M510 Code in | Hello
Sony car audio system after auto battery replacing flash (code in ) in its display and I dont |
|
|
| astra console display | hi, wonder if anyone can help...after replacing my mk.4 astra stereo with a better one, the temp/ ti |
| TDA4600 / Chopper Transformer | I am trying to repair a Ferguson T.V (TX100 chassis) which just went dead while switched on.
Init |
| Start by replacing the two STK392-110 IC's on the power board and also check all the resistors aroun |
| You need to take this to a service shop that is capable of or does RF connector replacements. They |
| Microwave | If you heard a "POP" and now a loud buzzing noise, it's one of 3 things
1) the rectifier diode on |
| flyback transformer help! Im desperate! | Hi, I have purchased the gboard for my sony kp53s75 projection tv. I am in the process of replacing |
| Dry caps. Try replacing c301 & c305 both 2.2uf 50 volts. |
| PTS?
thing is, having seen quite a few of these.... why is the main board suspect?
replacing a b |
| VP322 not working | Hi DigitalScorpion,
Same thing here. TV logo is orange and turns to white. I replaced the bad cap |
| Hi.
Ans 1: It is not recommended to use a power adaptor that has a different rating; especially s |
| sony KV29X5U | Flashing 4 times / Suspect frame Collapse Can you advise reference part Number & IC requires rep |
| before replacing ic 7064, you should try to put a 10 nf capacitor between pin 4 et 11 of that circui |
| Big thanks to those who have replied...
I'm sure that the TV has not been dropped - it had not be |
| Daewoo Plasma dp42 dead | I have a plasma screen which gave up the ghost. it simply wont turn on! apparently there is common p |
| Wow thanks for the quick reply and specifics. Is replacing it as nightmarish as replacing capacitors |
|
|
| Yes, the F fuse is a fast acting fuse which is supposed to blow before damaging silicon devices like |
| Have been out of consumer electronics for some time...I used to see this problem on a regular bases |
| How would someone go about replacing this? I couldn't find any instructions online. |
| Hi,
Thank you for your kind help John.
Since it's chassis L01.1E, I will check diode 6406.
|
| Philips 29PT6231 Dead with stdby light blinking | Thanks buddy. I've got a copy of the service manual for A8.0a chasis. After replacing the hort outpu |
| Mitsubishi VS4542 / VZ2 HV Problems | I don't have the HV working on this set. Does anyone have schematics or manual or some tips to check |
| Start by replacing the vertical ic. |
| am I getting hosed on repair costs? (Hitachi 50UX58B) | Okay - my 50" Hitachi Ultravision - 50UX58B (1998) set went bad days before my Super Bowl party. I r |
| Based on your description, it is a typical problem with laser attempting to read the data & is s |
| tv cable problem | My sanyo tv searches back and forth from one channel to another. Two channels in succession. For ex. |
| Dead Dell 1025HE | I'm attempting to repair a Dell 1025HE 17" monitor (essentially a Nokia 447S) for a friend.
sympt |
| A fuse almost never just blow, without a cause. So just replacing them without repairing the cause i |
| yes he has a big problem 5 a is a lot and that means power supply trouble. try replacing the big cap |