| Subject | Text |
| hi minnie i have made a video to show you fault better
[url]http://www.youtube.com/watch?v=AKus6 |
| [quote:3c9c28b759="fongs"]Hi,
1. Does the set power up?
2. Speakers - are they connected prope |
|
|
| Worked for me also. Great Job | Agatha,
Great Job my camera works well. After reading previous strings I had given hopes on my ca |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| Cory is right. Depending on the brand it's either a buffer board or a driver board, the model # prob |
| anyone experiences with samsung plasma tvs ( picture fault ) | hi guys been working on 3 ps50c97hd samsung tvs.
all tvs had no picture due to blown top buffer a |
| Citroen Audio System 3030RDS aka Blaupunkt PH1/C 9613345780 | Picking up a tip from A N Other, I pressed Preset 1 and 4 and switched on: no change; pressed Preset |
| Muting switch on stereo is cutting out sound in the speakers | Hi, I have an older (10 years?) Sears Electronics Professional Series Stereo Amplifier. I can't find |
| definetly not the z sus board, either the buffer board at the bottom of the pdp or more likely the p |
| You'll need to create your own places to divide the circuit. Today's surface mount parts and double- |
| Samsung Plasma - no picture. Mod: PS50Q97HDX PDP: S50HW-YB02 | Hello.
I have a Samsung PS50Q97HD 50 inch plasma TV that keeps blowing new boards and I don't know |
| LGA VGA monitor cable broken | if anyone knows color cable for LG STUDIOwork 700s monitor
please help me because my vga cable conn |
| Dead, Dead, Dead | I was taking out the trash and someone had thrown one away because they pushed the powerplug in to f |
| 5.5 The Blinking LED Procedure
5.5.1 Introduction
The software is capable of identifying different |
| Dear
Audio source is an iPhone and the load is a 50W car speaker is not clear. Because to drive |
| Hi.
Assuming you have checked and re-soldered or changed SMD ferrites between DC input Jack and o |
| Sony Crt TV in need of minor convergence | Hi All,
New to the forum but experienced with analog audio repairs.
I have 10 -15 yr old s |
|
|
| Equipment Repairs | I don't know what you are exactly asking...are you asking about which audio system would be good for |
| toshiba 42hp66 bad y-sus board | I have a toshiba 42hp66. The y-sus board (6871qyh053b) failed and has been replace. On power up th |
| Hey guys, recently I repaired a Hitachi 55HDX99 Plasma TV with help from you guys on this thread.
|
| Looks like an attenuator.... |
| Toshiba TV 14R21 (PWB-1386 Board) keeps power on and off | I have a 14R21 Toshiba old TV and still not consider it as a junk. The problem now was after few min |
| If Radio / CD, etc. ALL work ... Your receiver is fine.
To confirm, take one of your working inputs |
| [quote:b47496a6ed="Anonymous"]thanks minnie,
i changed the 24c eeprom which had origanal service |
| I'm assuming HAS picture.
from SAMS #2639-2: AUDIO: Inject an audio signal at pin 12 of IF/Sound/Sy |
| Re: Sony KV-21GMR1 | [quote:369e5e012c="marlon"]my Sony KV-21GMR1 is shutting down when u turn it on...you have to turn i |
| forgive me if im wrong but would the digital mainboard cause the lower buffer cof resistors to burn |
| all connections appear to be wound. I unplugged each buffer board one at a time and no change. The l |
| Thank You Gest.
I am working on a Sony KP-51HW40 Projection TV.
When I power up the TV there are a |
| not that fault | hi i tried that but not fixed it, sometimes if i keep turning tv on and of and on and off it will co |