| Subject | Text |
| In which country are you trying to use the fax machine, and which country is it initially sold?
U |
| Toshiba TV 14R21 (PWB-1386 Board) keeps power on and off | [quote:b8bfe93703="minnie"]Chech r216 10k ohm to see if it's burnt. If so you need to replace the re |
|
|
| Bush tv (11ak45b5) Picture collaspe | Hi
I have been given a bush tv to have a look and and see if I can repair it. I am after so help |
| thanks minnie,
i changed the 24c eeprom which had origanal service menu settings from the origana |
| Plasma PHILIPS 42PW9982/12 shifted image | Initially there were six errors 044,090,089,75,76,77. After the replacement of one bloated capacitor |
| Pioneer VSx-5900S | I do not get anything on FM or AM but the Vu meter shows a received signal as they fluxuate on left |
| [quote:b54fb7477b="vtech"]Not familiar with the specific unit, some mechanism loop basics to check |
| Panel or buffer board. |
| samsung HP-R4252 | [quote:fa84dec4b1="minnie"]Check the fuses on the sustain boards and yes I'd replace the y and the y |
| it wont work, not seperate cells for each pixel, once the screen is cracked it needs to be replaced, |
| Sony KV-35V45, Bad CRT. Looking for short... | Hi. I tought i would start a new topic, since i've focused my problem and my questions are different |
| NEC PX-42VP1G or 42PD1 or 42PD2 | hello. I have a problem with Power Board - not work at all. I changed the main Mofset and and check |
| try tapping the neck of the piucture tube if this changes then you have a bad tube,.if not try the v |
| [quote:458f746099="gary"]probably a faulty pdp, have a very close look at the screen, check for any |
| Yesterday I had a Samsung plasma that after it was on for about 10 minute would get red horizontal l |
| [quote:8046c12511="Anonymous"]Have you checked the horizontal output transistor for shorts?[/quote:8 |
| Beko 22.1 | I have a beko 22.1 chassis where 12V source (LD1086V) is running very hot. LD1086V is turning hot ve |
|
|
| Depending on the brand, they'll tell you the digital main, logic, and driver/e buffer boards. When y |
| 2 HD's TOSHIBA DT01ACA100 1 terabyte each suddenly the bios | Hello Guys, I have 2 HD's TOSHIBA DT01ACA100 1 terabyte each suddenly the bios only recognizes 32 mb |
| Look at the Y sustain upper and lower buffer boards for fried IC's. |
| panasonic with px1 chasis | can u help me with my board with B+ 41V and on and off relay
no oscillation on HV? |
| AVR7000 HK surround problems | Hello all,
I am loate to bring back a zombie thread, but well my amp turned into a zombie so I figu |
| im not sure if they were blew when origanal blown board was in the set as i never checked them till |
| Catalog of all electronic and semiconductor component datash | www.Datasheetpro.com , by DSP Innovations, recently launched a Free search
site for electronic com |
| Hi Jouni that's great. And I've already found the procedure now. It is the same method that you de |
| Philips PTV915 Model 50P8341 | This unit powers up and then immediately starts switching what appears to be the source input every |
| Buttons not working | As per the first guy my 600CD has the same problem. On-Off and volume are all that works....nothing |
| just a update minnie.
i replaced the shorted 470 surface mount resistors on the lower buffer boar |
| HP-R4252 looks like yours | I just had my HP-R4252 repaired on 12.05.09 and it looked exactly like these photos. The picture i |
| Re: Notebooks. How to replace part. Teardown guides with pic | [quote:892730c2f4="Anonymous"][quote:892730c2f4="Anonymous"]hi sir before i want say sorry to you, |