Subject | Text |
| Thanks heaps for the help and looking into teh schematics Vetch. I found the schematic to beabit cra |
| I usually just take a magic marker and draw a line across the control - that is across the movable p |
|
| [quote:6cc2255013="Anonymous"]anyhow, that is great! much appreciated. I could not find that manual |
| It was a blown out channel.
Got the sound IC replaced, and working excellent again.
Can anyone |
| What you are describing is identical to the issue which only affected the DVD operation cycle but I |
Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
Viewsonic 21PS + Sledgehammer + Gasoline + Matches | I just replaced the color driver IC1302 in my 21PS because of a bad green signal. After replacement |
| You've also got the problem of how to control the frequency if you are not exciting the motor(now ge |
| Try to find the signal that is used to tell the controller that the set has found a valid signal (us |
Sony KP-57WV600 Blue CRT driver board | Hello everyone. My dad bought a KP57WV600 tv that had a known convergence issue with the red CRT. |
JVC TH-A30 i've had enough | That's it, it's garbage can fodder now... I spent more on repairs on this unit than the actual purch |
Sony GDM500PS - Please HELP: red signal fluctuations | Hello.
This is actually monitor with Sun logo that came with SPARC workstation. Its FCC ID is AK8 |
Samsung Recorder | It was a simple case of setting the clock time. DUH!! |
| Hello,
I´ve had the same problem. When I push the on button the relais clicks and the clock st |