| Subject | Text |
| hitachi tv vertical hold problem | have a hitachi ct-7899b tv that every 10-15 min the vert hold goes for a min , no vert adjustment o |
| PIONEER CDX-FM65 | first of all i cannot find this model anywhere...the only one close is the cdx-fm657....i have regis |
|
|
| Before proceeding with replacing the chip, make sure that the fault is there and not elsewhere in th |
| Thanks for the input, I was able to get the laser focus to work, and then it crapped out on the sled |
| Sorry , I tried to edit my original post but I can't login . Here is what I've found out :
1 : The |
| can will help to shift a frequency | Who step of adjustment FM with 200 on 100 can will help to shift a frequency grid-switch. Device Chr |
| "Distorted" is too generic to understand what your problem is. If the customer convergence procedur |
| Philips...I must own the only one like this on the planet. | Hello, I have a Philips 64PP9701 (RPHDTV).I have found little to no info on this set. Philips will n |
| yes a philips screw driver should do the job.some manufacturers leave holes for this adjustment some |
| Don't know the brand or type of the TV, but if it has a electronic convergence adjustment, you might |
| Update,
The unit will playback SOME tapes but other tapes - which previously played back fine - wil |
| Need the service manual of the Daewoo DTA3291 chassis 770 | I search the service manual of the Daewoo DTA3291 chassis 770.
With the good alignment instructions |
| They're called Projection Tubes, NOT Globes, one Red, one Green and one Blue.
If you are mechanic |
| I've had a couple of CRTs go down on Philips 32" models. The effect you get on screen is like a red |
| Re: Could still be corrupted | [quote:9a5723a199="jts1957"]daveyd "... It was kinda funny, before I did the reset, some of the |
| akai vcr error list | I am searching a list of errors for vcr akai vs-g 511, it shows error 3 after a storm. All voltages |