| Subject | Text |
| Horizontal line across the screen on Samsung tv CS29K3NTBX | I am working on a [b:8ee765680c]Samsung TV using Chassis KS3A(P).[/b:8ee765680c]Its having vertical |
| Goodmans GTV69RF2 eeprom bin | Hello, has anyone got or does anyone know where I can get a master eeprom for a Goodmans GTV69RF2.
|
|
|
| VW42L HDTV10A | I have repaired the master and slave inverters. They are used in Vizio, Philips, and Digital Lifesty |
| Sony Trinitron KV-29K5U dead | Hi,
It went pop and turned off. There is a capacitor in the primary psu that has completely burn |
| It is more likely that the pins with 76 ohms to ground are inputs for horizontal and vertical sync. |
| i need the remote code for my matsui 2017T | i lost the original remote and bought a universal one but i don't know the code so it will sync with |
| bonjours je cherche a acheter des cartes pour tv philips 6632l-0470 lc420wu5 master j acce |
| Found a service bulletin | SYMPTOM;
The DSP fails to operate properly. Unusual noise is made or no sound is heard.
[i:559c1 |
| sony kp48-ps1 | I have a problem whit blue color
no sync
y use the service menu -->projector engine > 6 |
| 4 flashes means no vertical sync, if line stage is running correctly check frame output ic501 and it |
| sony kv s29mn | sir i am facing a problem that the sync control is not lock the picture
it is rolling verticali |
| VW42L FHDTV | Has anyone out there fixed their TV's? I'm now looking for someone who
has a TV like mine. Hopefull |
| Re: code for nav + magnetti marelli alfa romeo | [quote:cc54d1c5c5="mike54"]Hi !
Could you help me having a master code for my gps nav+ magnetti m |
| Philips 29PT9418/79G MG3.1A chassis problem | I wonder if anyone out there can help me with this one, I have recently got an Philips 29PT9418/79G |
| Can anybody translate these into plain english for me? | Hello, the first half of this list was easy to figure out what the settings do. but I can't tell wha |
| [quote:751411a959="torbjorn"]So, you have identified the RGB signals, that is a good beginning.
The |
| Re: inverter boards for sale | [quote:243bc35474="Dan the TV man"]I have 2 inverter boards-6632L-0283A,6632L-0282A.They areLC370WX1 |
|
|
| midas venice 160 | hi guys
i have a midas venice 160 desk ,there main master fader is destorting and there is no ou |
| here is the color codes:
PIN LABEL FUNCTION COLOR
1 RED Red color signal pink
2 GREEN Green co |
| Re: Schematic LG | [quote:96490d2359="master103"]Check this file:
http://www.eserviceinfo.com/download.php?fileid=15 |
| Sorry to be so long in answering your response to my question. I've been off on other things.
I'm |
| rca proj tv | Thanks for the help... I even got to the adjustments, big mistake went too far on one and lost the m |
| GDM1950 | I designed a little circuit that changes the horisontal and vertical pulses to the right modes regar |
| Sounds like a mistake in buying......
While an oscilloscope can be used to monitor video & si |
| Does the set have this pic in pic module...#930B552..if so suspect bad electrolytic capacitors on t |
| Re: 32AV500U | [quote="JimFraley"]I have this TV with sound and no picture. I tried the flash light trick |
| EASY ADD YOUR SLAVE HDD | Easy, remove the jumper installed on your Seagate hdd, connect the WD on the extreme connector and t |
| beovision 7 | please help i need the master code for b&o beovision 7 my kid play the remont control thank you |
| Re: Orion Studio 710 | Hello
Need schematic for TV Orion Studio 710.
Only horizontal line… I replace V out TDA8174W with |
| JCV LT32x576 Weird Green Pixelated Screen | I've got a broken HD Tv. It's a JVC 32X576. It's a few years old and one day when turning it on the |