| Subject | Text |
| 42WS90E | Hello,
The Thomson Plasma 42WS90E is actually an NEC rebadged, and yes this is 100% correct the p |
| [quote:458f746099="gary"]probably a faulty pdp, have a very close look at the screen, check for any |
|
|
| From a UP220-AE in a Tatung v32gcgi LCD TV:
R5 = 101
R60 = 102
IC1, 8-pin SMD possibly marked 1 |
| Proscan service manual | I work at ACE TV in Las Vegas,NV I need the signal board secondary power supply schematic. Voltage t |
| 32" Sony WEGA no audio | I have a 32" Sony WEGA CRT television that's about a year old, model KV-FS120. It has a strange |
| How to protect the CD-R? | 1.The main influence to the durability of CD-R
Temperature and humidity are the most basic and |
| req : service manual for pioneer xv-htd530 (pioneer rrv2785) | need service manual or troubleshooting info.
thanks. |
| Philips Magnavox TV Service Manual 7586 multiple models | [size=18:e150f5ca70][b:e150f5ca70]Philips Magnavox Service Manual (7586)[/b:e150f5ca70][/size:e150f5 |
| fujitsu plasma problem | Fujitsu pds 4201 u/h has recently submitted a requested to be transfered to the scrap heap! Does any |
| Read this 5 plus time, sounds like a bad panel/pdp. |
| Dead Screen on LG Plasma TV | Hi,
I guess my earlier post fell thru the cracks, but if anyone has any idea how I might fix this |
| What do you have? A scratched front? By the LCD?
On page 29 in the service manual, is the part re |
| Re: yamaha RX-V1800 | [quote:e5feb97d31="[email protected]"]I just had my RX-V1800's dsp assembly changed as what the yam |
| Well, you can test basic functioning of the multiplier with a low voltage AC drive to the multiplier |
| Sanyo 27"- Does not turn on | I was watching my TV earlier today. All was well and I turned it off. When I went to turn it back on |
| TRACON TED model 350367 REV B | Looking for scats and troubleshooting guide for:
TRACON TED model 350367 REV B. Any help is apprec |
| hope not | 4 years still young for a tv, i can still get parts for a 10 year old tv. do you have schema for you |
|
|
| dead sanyo 27" at start up | I am new to this forum and tv repair i have been an electronic tech and a mechanic for almost 30 yea |
| Hi,
These are out of warranty repairs, the PDP,s are fine as I have tested them with working cards, |
| [quote:9606989fee="minnie"]If your VSC is low/incorrect that would indicate a bad sustain board. [/q |
| Help please, Alfa Becker code | Hi people, can anyone help me with Becker ICS code for alfa romeo 166, model BE2580. Here are datas |
| Panasonic TV/VHS Player Combo Model PV-M 1369 | Hi I'm new here so I hope I do this correctly. I have a Panasonic tv/vcr combo that also has FM Rad |
| that is a very basic repair, if you are not confident do not attempt it, however cost of a new unit |
| Panasonic TX29GF10 29" won't start. Need service manua | I have a Panasonic TX29GF10 29" that won't start. I tried to find the service manual (with schemati |
| Hitachi 60SX10B | Hi anyone! I have a rear projection TV model Hitachi 60SX10B with an AP53D chassis. When I first t |
| I did the same troubleshooting as guided by many ppl above. It worked. It was absolutely dry solderi |
| the resistors and diode are failing due to the panel drive ics being sc, as these are part of the ri |
| Sure the model of the tv is Phililps 42PF9966/37 the display in the tv is a Samsung PDP S42AX-Xb01 |
| codes for panasonic tv for URC24 | Hello, to program your remote control, look in my above description(walter58)
Codes for panasonic |
| Dead | Basic Line model BL 2015T chassis 11AK19 Pro |
