| Subject | Text |
| my Bush tv don't display anything on the tube | hi
my Bush Tv powers on to stand by, and when you want it to light up the tube it can't, but u wi |
| First some blocks during mp3 playback after few weeks completly power-off.
Fuse are ok.
At first l |
|
|
| Any experience with BAPCO IEC601L Universal? | Using a BAPCO IEC601L Universal Safety Tester for Leakage Current tests. Recently back from Calibrat |
| Help needed repairing a Ferguson set with TX80 chassis | Hello all
I desperately need help repairing my wife's TV set, it was given to her by her late gra |
| Have you tried adjusting the picture from your pc's display card driver settings?
I think you can |
| And it just may help if you mentioned the make and model of the phone as well. |
| The "factory mode" on screen menu can be accessed by:
1. press EXIT
2. go to the 7th tab, down to |
| nissan qashqai radio code | Hello
Can someone decode radio code from my qashqai?
There are all information form the body of r |
| [quote:3158b38d3b]I'd really like to try and identify the issue since I called three different repai |
| Hitachi INC551 CCFL inverter | Hi All,
I was looking for information on this inverter also. It is used in several types of TFTs |
| Wher to find a viewsonic N3260W power suply | My brother as a viewsonic N3260W with a power supply ref. GPFSP208-3M01 REV:1 P/N: 3BS0096716GP
I f |
| 36 in Samsung HDTV lost pix and power | my 36 in samsung hdtv (tube type not rear proj.), only 1 yr and 2 months old, lost pix and won't pow |
| Won't Start - 3 clicks and out? | I have a 32" ProScan that started doing the same thing. When I click the ON button it sounds as if |
| Vector Reserch | That's a lot of help Ray and Thanks for the help.I'll probably just proceed with the repairs as if t |
| Replaced all transistors | My transistors have finally arrived i've replaced all 4 and 2 further resistors that were connected |
| since you have a VOM/tester, set it to X1, be sure to discharge the largest capacitor u can find in |
| Looking for a Magnasonic Model 5522 schematic. | Ideally I am just wanting to know which CRT is being used in this set as it is missing it's labels ( |
|
|
| For model SLPG370A the optical system is CDM12.1/0 , and fot SLPG400A - CDM4/19. It is more likely t |
| Sanyo CE28WN5B Service adjustment | Does anyone have the service adjustment list for the CE28WN5B? I have a service manual and schematic |
| BN44-00662A SCHEME | PLS. SEND ME SAMSUNG 40F6400 TV PSU SCHEME
CADR MODEL BN44-00662
THANKS YOU IN ADVANCE. MO |
| Vizio L32 HDTV10a turns off by itself | After I got back from a trip I turned on my tv and Xbox and played for about 30 seconds and all the |
| need schematics for CTX VL 700 | Can anyone email to me the schematic for a CTX color monitor model VL700? FCC ID DBL1769E. By CTX In |
| Tektronix TDS3032 Goes Faulty! | My Tektronix 3032 DSO has developed a rather annoying fault. Channel 2 works fine and shows no fault |
| You sure VS is 600? |
| Re: philips l01.1e | [quote:ad5ed54760="terminator2k2"]hi all just wandering if some one could help me.?? i have a philip |
| Do you still have high voltage on the tube? (static sound when turning on/off the screen)
And are |
| Usually, it is difficult to identify small hole mounted diodes with a such simple marking code.
But |
| Sony TV Model KV-32Ws2V | The fault is as follows:on switch-on the degauss circuit operates but there is no sound or vision, a |
| SONY VPH-1031Q power Supply board(GA) | Projector worked fine for 8 years, but now its not powering up. I traced the problem to the GA boar |
| [quote:2dbe6cb9be="jts1957"]IF it's even bad at all.
You DID test the original?[/quote:2dbe6cb9be |