Subject | Text |
| [quote:4329f6d569="jts1957"]RESISTANCE across C32?
Resistance on Pin 9 of CN2 the WIRE that connect |
[Monitor] Proview Electronics 770M help with repair. | I've founded that monitor some days ago..
I've plugged to alimentation (220V 50Hz) and to computer |
|
Philips/Magnavox Convergence | I have a 1997 Philips/Magnavox model 7p5451c101 chassis ptv780 that was stored in garage that needed |
| IF your meter has a 'diode check' feature and 'reading of 1' is also obtained with the meter leads N |
Same problem with diferent model monitor. | I have a Hansol 910A. And if I twist the cable right at the conector that goes into the motherboard. |
| Heh, true, that would come in handy. Here's the schematic of the affected area. I can post a more fu |
| You need to post more details. What O/S is it? Is is a branded computer or home build? Mobo model, o |
NEC PXT-42S11S " Heat Run" ? | I need help desperatley as NEC don't feel the need to provide it. :x
I recently purchased the N |
| hi barry,
i am considering purchasing a 17md255v for my boat and have the same concern. it seems |
| cheers for the help guy's,
have not had time last few days to even look at this TV,oh the joy of ki |
| probably the belt is not turning the reels of the tape when you put tape in it thinks that the tape |
| I've had a couple of CRTs go down on Philips 32" models. The effect you get on screen is like a red |
| awesome reply! i'll check out all of these things.
apon closer inspection i found a white box(i do |
philps hdd060 mp3- HELP | the ac/dc adaptor didnt work. (5v 2a output). philips wanted 50 quid for a new one, but i bought one |
JVC 32WFP1EK w/s TV st/by only - Help! | :cry: This evening my JVC defaulted to standby. It started with the picture not fitting the screen. |
SONY DVD/VCR Schematics (inside) | I have a new sony player than someone has decided to remove the top to remove a tape. I have to fix |
| unfortunately at that age with that fault description i would say that the crt has reached the end o |
|
| Ravi Fixit
Hi mate i have the same problem on same monitor,been all over the web to get a cable but |
Re: KX-F90 | [quote:6bed6ed50a="dido"]I am looking for documentation for KX-F90 Panasonic fax machine. On the dis |
| Turns out it was the fuse, I just soldered a wire from on end to the other and canceled out the fuse |
I need shema | for auto radio cassetofon Renault Philips 22DC229-62P, or need Power supply
I think toshiba. I do |
Looking for an electronics tech | Looking for a candidate skilled in radio, tv, stereo, applicance repair - and/or experience in repai |
| IF THE RED CATHODE VOLTAGE IS LOW THE PROBABLE CAUSE IS A U/S CRT, TO CHECK DISCONNECT ONE END OF TH |
National Model TC-2186 MR -Display powers off after 10 mins | This TV has been operating problem free up to end 2004 (purchased 1991).
Has developed this probl |
how to remove white wire from flyback? | I can't figure out how to remove white wire from the flyback or the other end. Any suggestions? |
Intercom buzz | Lots of faults can cause buzz, but no ground or poor or corroded ground connections on shields is a |
kenwwod | Hello,
Most probaly in this case is that your end stage is faulty.
Mostly the transistors on the c |
SHARP | HI MARIO
IVE GOT THE SAME NAME MYSELF,FIRST OF ALL WITH OLDER SHARP TV YOU WILL HAVE |
| IT SOUNDS LIKE THE HEADS ARE DIRTY, THE HEAD GAP ON VCR IS VERY VERY SMALL (IN THE MICRON RANGE) AS |
| In this set the tuner is front end, this mean that all audio and video procesing from hight frequenc |