| Subject | Text |
| Hitachi C28WF560N TV Service manual needed please | Hi,
I am desperately looking for the service manual for the Hitachi C28WF560N Widescreen TV please |
| Why can channel output restored by tapping speaker cone? | I suspect I have a problem in the right channel of a '79 Nikko Alpha II power amp (100 watt rms/ch), |
|
|
| Speakers and wiring are good. The distortion is there regardless of input - whether internal (tuner) |
| Philips 28CL6770 28" TV-Intermittent shutdown | I have a problem with a Philips 28CL6670/25Z 28" 4:3 TV.
The right hand side of the picture |
| check her line for distortion, phone line splitters are notorious for this. |
| Since it's been 2years. I believe the problem has been solved. I'm facing the same problem here (pin |
| Lacie Electronblue IV 19" Service Mode - How To | For others who have been searching for how to do this:
Hold down Adjust buttons (+ & -) and & |
| ...more like Model STRDE305 (for US Model)
" With 8-ohm loads, both channels driven, from 20-20 |
| toshiba tp50f50 | just replaced the 2 ic's and am thrilled that the set stays on now!!!!
found it getting tossed..... |
| Please note that simple multimeter with a capacitance range often are useless for measuring large el |
| Thanks Gary for you instant respose! I don't understand what you mean 'diamond button'. Are you refe |
| Try supplying a 1 kHz sine signal from a tone generator to an AUX input and look at the output signa |
| LG (Goldstar) schematic | Has anybody out there got a schematic for an LG aka
Goldstar model CT-29K30E, I've got some seriou |
| Help Needed PDP TV plasma tv. PDP-4201? Wont turn on | I bought this from a friend recently as a project to fix and possibly sell on, the tv can be seen he |
| TV with black, jumping lines which stretch the image. | Hey all!
I've got a question about my good ol' 28" Sharp TV (28HW 53E). It's getting quite o |
| sony KV28DS60U picture problem | im after general pointers as to the cause of my problem..
the picture seems to move in/out dependin |
| Does it have E/W (pincushion) distortion too or is the width too low with straight edges of the scan |