Subject | Text |
Red key lock for Changhong TV | Hi there,
We have a Changhong tv that somehow has been locked... It now has a blank screen with |
| Hi,
I had the same problem, but now have another problem.
I followed option 2, skipped option |
|
Updates... strange problem! | Hi,
More updates...
Last nite, the problem got worst. The screen starts by having the 1-2" fol |
Toshiba 61HX70 : horizontal bars on screen | Picture is fine when set is turned on. After approximately 10 mins it breaks up into many horizonta |
Bright | There is a black transformerwith a red wire coming out of the top and attached to the back of the CR |
Philips 29PT6361 shutting down | When TV is operating picture quality and sound very good. The TV would run for a day or 2 minutes bu |
| [quote:6a60d01696="Anonymous"]It's most definitely a connection problem in the filament circuit for |
Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter an |
RCA 52" Projection HDTV Model# R52WH74YX60 | I have had this TV for 3yrs and it worked fine until 3 days ago. All of a sudden the picture is dist |
| Your CRT is getting a layer of dead material on the cathodes of each gun.3 options.Take to repair sh |
| Same thing here with LD-12AW2 model.
Already placed float switch (round thing on bottom).
Inle |
| The screws are TORX-6 I think, my screwdriver says T-6 and was perfect for removing the bottom screw |
JVC VCR (HRA591U) | Tracking problem.......Heavy lines on bottom of screen..... Will Head-cleaner remedy this problem, o |
Hitachi 50UX58B Dead w/out Red Light-SUCCESS! | Hi all,
while waiting for a reply to my most recent post...the parts arrived and the two parts [e70 |
Panasonic SD-P5073-K | The top half of my screen is not bad, but the bottom has a blue gun bowing
about 1" high on the en |
Sony KV-M1400 Tuning - How To | I emailed Sony Tech Support. They photocopied the page of the manual which describes how to tune it. |
|
Philips MATCH///Line Classic, height adjustment? | Philips MATCH///Line Classic TV
Circa 1993,4,5??
Model 28CL6770/252
Made in Belgium
Prod. No. AG |
Re: light bulb broke off the wires for main display | [quote:9d1879eb2d="Dean"]I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb ha |
problems opening files rar | Hello, did you read [url]//www.eserviceinfo.com/help.php[/url] there is info towards the bottom |
A little clarification | When I said the top and bottom were not "aligned" properly, it means that it actually cuts the top o |
jd75125 addendum PVY4665RK | :) Sorry Larry E, I did not provide much info. after taking more detailed
look at TV, here are wha |
Unknow parts in Hyundai imagequest L90D+ | Hi
I need help for this monitor- Hyundai imagequest L90D+.
(type no:L19C0D072)
The inverter b |
Int. going to Standby | Hello,
Apart from checking all stabiliser ICs', links (solder top and bottom), etc.and checking for |
NEC 61mp1 (plasma) w/various stuck vert lines on bot 1/2 scr | I recently acquired an NEC 61MP1/61MX1A that has several vertical columns of stuck pixels (some R, s |
| [quote:e5c9f70e67]Vertical is left to right. Horizontal is top to bottom. [/quote:e5c9f70e67]
THI |
rear projection TV issue | I have aquired a really old (11 years) rear projection toshiba TP55C80 that has some issues with wha |
| I removed the main board tonight. Was able to get a good look at all the components and access the |
Panasonic TV TX-21ET1M vert foldover line problem | Hi,
I've a Panasonic 21" TV (model: TX-21ET1M) with a very strange problem:
There seems to be |
Re: Plamsa PX-42VM3G | [quote:1ce23acc27="Dooney"]Hi,
Can you describe what the problem is with your plasma display ?
|