| Subject | Text |
| Hi this is a Sony D99 chassis and the flashing of the Amber LED indicates the fault area.
D99 LED F |
| Winrar happens to be a shareware and 7zip is a freeware that is a lot more flexible. Neither one of |
|
|
| SD-V392SU2 | I saw your note. I have a manual and could scan a parts list for you if I knew where it was in the b |
| [color=violet]Need manuel for Sony CD changer HCDGSX100W | Hello, I'm new here. My brother asked me to find the manuel for his Sony stereo/cd changer model HC |
| First of all... Hello to all the Googlers who have been searching for a solution to the same problem |
| i should certainly check the soldering in lopt stage ie flyback transformer line drive tranformer an |
| Re: PX-50XM1 | Thanks Mike,
I just added a few more pics and video plus an email.
Chris
[quote:a3f32 |
| NEC 50 mp1 half screen problem | I am hopeful that someone in this forum can help me. I have 2 plasma monitors (50 mp1) I bought a y |
| Hi have a look at this link download/open the pdf file here-:
http://www.s-manuals.com/smd/bc
I |
| manual for philips PM3055 | Can anybody give me (sell me) the user manual of the Philips scope PM3055?
If it can be in PDF or o |
| Beko chassis 12.1 tuning doesn't stop | Found out a little more. The I2C bus controlled Video Processor chip has an output registor read, du |
| Schematics for JVC AV-27820 TV | This TV lost its vertical scan. Does anyone have a schematic for this TV so I can fix it?
Thanks |
| Vista does not allow the upgrade to Windows XP (as opposed to may).
Make sure you do not have data |
| You said white line in center, of this is down the middle then it's a line scan, usually scan correc |
| Re: STR-DB725QS | [quote:80f4106bc9="onkel.tom"]Hi Andreas
Have the servicemanual you need.
Check the solderpoints |
| Beko 12.1 chassis tuning doesn't stop on strong signals | Hi all,
This Beko 14213T (chassis 12.1 with UHF only) just continues to scan over all signals. Chan |
| Re Finlux 1000 | I had the same problem about 3 years ago with this model.
Check continuity of line scan coils..shou |
|
|
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| Picture squeezes horizontally | Make and model of set would normally be required for more detailed diagnosis.
With the set unplugge |
| Mag 810FD too bright | A hand-me-down from a friend. The monitor is too bright and adjusting brightness and contrast can't |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| The datasheet for your component is here:
http://www.alldatasheet.co.kr/datasheet-pdf/pdf_kor/TOS |
| hola yo tengo el manual de aiwa wx 220 si alguno lo necesita lo puedo escanear en su idioma scxslot@ |
| PX-50XM1 (50MP1) | All,
Just so you all know, below are the pcb labels from the scan board of the 2 capacitors which |
| the set has dry joints, try resoldering the line output and drive areas of the tv, also on those set |
| If the powersupply is not normal it generates a reset signal to the processor.
Go into controlpane |
| Toshiba FC22 Copier Problem | We have a problem on our hands and I need some help.
First of all, let me say, I'm not a copier r |
| Can you get to the B.I.O.S. screen and does it stay on?
Try booting into safemode, press the F8 ke |
| 4 flashes is no vertical sync, check ic501 and related parts, it may also be worth resoldering the r |
| Repair to a 11ak19P4 chassis, goodmans widescreen | I have 2 wide screen Goodmans Tv set that have the same fault.
The TV powers up and comes on when |