Subject | Text |
Bush WS6672 (PT92) New chassis, no sound/no picture | Just fitted a new PT92 chassis to Bush WS 6674. Set turns-on (thump through speakers, green LED), bu |
Sony VCR misteriously back to life | Hello everyone, I'm new to this forum, it seems very nice!
I have a question about a sony vcr slv-s |
|
| C = capacitor
Q = transistor
D = diode
R = resistor Some resistors are flameproof (fusible) These |
Kenwood KR-V8090 AV receiver, no sound | Hi,
I got a problem with that V8090 model as all sound outputs are staying silent, including hea |
AWS | Can´t i control channels from Pc if i buy pci board?What i must do to control channels switch? |
Re: TV Watson FA5112 | I need TV Watson FA5112,
The remote control |
Neufunk TV 34BNA Futura,instruction manual | Hello,
I just repaired a Neufunk tv 34BNA ,which had a white screen and flyback lines across the |
Re: Back to Basics... | [quote:d556aee40a="krytron"][quote:d556aee40a="vtech"]Perhaps instead of keep repeating yourself, if |
Sony DE197 Receiver Schematics and Service Manual Request | I am looking for a service manual for a Sony DE197 receiver (two channel, basic stereo).
Alternat |
| It is a Philips 29GX1895 Anubis and its about 10 years old. I love this TV! Never had a single probl |
| Thanks gary. I might still take the lid off just to make sure it isn't stuffed full of dust but it s |
| [quote:f23aedd762="Anonymous"]I am unable to change any settings in factory mode.
Help[/quote:f23ae |
Contact details for Bush VCR Service Manuals - anyone ? | Re: Service Manual for Bush VCR 925 NSIL
Does anyone have a copy, or know where I can obtain a co |
ViewSonic E790 Brightness | Even with brightness and contrast all the way up, my E790B is very dark. Is there an internal contr |
TDA4600 / Chopper Transformer | I am trying to repair a Ferguson T.V (TX100 chassis) which just went dead while switched on.
Init |
| ed1.2 is the updated version and will cure your problems. the way to find out the correct version yo |
Service Manual for Becker Mexico Pro CC 4527 and/or CD4627 | [img:7b2383c645]http://www.mybecker.com/fileadmin/bilder/Produktarchiv/CC4527_Mexiko_Pro.jpg[/img:7b |
|
| far more involved than just changing the tuner, in is not practical to convert the machine, there ar |
| The major problem is the mains voltage, 230 V in Europe as related to 110-120 V in the US. This prob |
Re: Panasonic CT36HX40 keeps blowing PS fuse. | [quote:36a0f26824="Chuck Cintron"]Hi...I've dabbled in digital electronics as a hobby but not much e |
| [quote:d2eb4ddec8="moustapha"]Pls press the "display" button on the remote control for 5 s |
| thats a transistor. if it were me I would look for where it came from.
look for a spot that has a |
kenwood UD701 service manual, pease! | Hi my system remains always in stand-by, the power button or remote control doesn't switch it in pow |
code for fiat multipla | i need code for my fiat please...
BLAUPUNKT
serial number 815BP534457810625
part number 7 645 344 |
May be, just be very very careful | Basic check only: Unplug your unit, open cover and check all fuses. Also check for loose connections |
| Old B,
If you take a little time to look at the diagram, you will see that by taking Q101 and (su |
| I gues u must have been familiar with the basic fuse test from the power cord and fuses within the p |
Service-kit and manual | Hi and thanks for the replay!
You are probably right regarding the “safety switch” (strange produ |
| [quote:f470f64bcd="seti"]after 2...10 sec -----> put in safety
http://www.boostupload.com/img |
| Torx or Safety torx most likely.
[url]http://en.wikipedia.org/wiki/Torx#Variants[/url] |