| Subject | Text |
| Samsung TI14C5 chassis C15A - Pal I to Pal BG | Hi,
I have this set in to change the system from Pal I to Pal BG, basically just changing the set |
| Re: Tape dack made by technics RS-TR373 does not play sound | <span class="notranslate" onmouseover="_tipon(this)" onmouseout="_tipoff |
|
|
| Re: philips 25gr | [quote:f15e5ef5bb="polaret"]Hello
I have a philips 25gr TV and the problem that i have is that aft |
| If the oscilloscope is from the 70's or even older, there is a possibility that the HV rectifiers ar |
| HTC Rezound | Hi Friends:
I would like to know if my HTC Rezound can be programed with your DFS Professional CD |
| Mystery Diodes | Well I'm new here and athough I know alot about tube equiptment I have limited knowledge of solid st |
| Panasonic CT32SS31 power | I have for repair a CT32SX31 set. I have no HV but power. When I plug it in I hear a high pitch and |
| If I understand you right, it is a pincushion problem, bowed edges. Check the electrolytic capacitor |
| electronic mania | The first applications of electron tubes were in radio communications. Guglielmo Marconi pioneered t |
| Gents, l was working on the very same unit, with same problem.
Battling for 2 days and no luck.
|
| Can you measure resistance (Ohm) with your meter?
If so, a short should measure 0 - 10 Ohms
A go |
| You can buy a ESR meter from MCM electronics for about $20.00 |
| Re: looking for | [quote:6e09f5f793="jts1957"]That's the "Location" and "Rating/Value" of [b:6e09f |
| Do you have a remote and does the volume work on it? If yes, it may be the rotary encoder itself? If |
| Int. Philips | Hello,
Below find my only database entries for the fault you describe.
1/ TV set starts up and |
| Yikes! Now it's getting complicated! I found the Power Transistors and ordered them through
htt |
| Re: Viewsonic N3245W Black Screen - Need some help | I would like your old inverter board; have one with bad transformer on; can't find supply of board o |
|
|
| Ok. I forgot to add something. I've measured the KR KB and KG on the pcb on the CRT. If the board is |
| printer All in One Lexmark P6250 | Hi guys, I have a Lexmak all in one printer Modle# P6250 lately has been telling me that ,CLEAR CARR |
| Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| videocon microwave | Worth checking them anyway using a meter as they cause a lot of problems on all microwaves. |
| No, I don't have it. But thanks for the idea. I once had a PC motherboard which has strange behaviou |
| You meant, STP16NE06; made by STS which is an European manufacturer and you can't find it? Obsolete? |
| Hello
You must meter output lines of power supply unit and check that their values being true (as s |
| the best procedure to check ultra fast diode by analogmeter | the best procedure to check ultra fast diode by analogmeter
what is the best procedure?
how t |
| SHARPY T.V trobelshoouting | HI friends
I have a problem with my 14'' sharpy colour tv from made in shina.
it was stop |
| PSU problem Infocus 5700 - heat up caps works | Hi all, I have an Infocus Screenplay 5700 projector with a PSU problem. It fails to startup unless I |
| Is it an Electrolytic ? If yes a esr meter, and or a capacitance meter. |
| Nd Svc Manuals - Fluke 8060A, Pana-KX-P4430laser | I looked here far and wide and have not found the manuals.
The KX-P 4430 is similar to several m |
| In my dealings with satellite receivers if they’re junk you replace them. You can take an esr meter |