Subject | Text |
resistors | you`ll be okay with the resistors, stay with the name brand stk`s,
if R3243 measures 110K 0r 120K d |
Fusible resistors better than Fuse in TV Power Supplies??? | I saw the fusible resistors ( typically 1/2 watt. .1 ohm rating. Sony #1-202-933-61 ) used in a lot |
|
Bush DVD2004/A resistors burnt in PSU | dear sir,
i have this manuals in stock,please contect.
email.add. [email protected]
|
Resistors 105 & 106 | I just replaced resistors 105&106 and am happy to report that my trusty Denon is now working aga |
| wtf?? (previouse post)burnt resistor if wirewound ,strip back to nearest coil on the resistor you ca |
| you are talking about the stk392-110's correct?? can anything cause those 1 ohm resistors to burn o |
| 1) Resolder all the output transistors solder joints and any other intermediate transistor stages th |
| They should be 6.3 ohm resistors not 630. |
| Alek (or anyone)
Not built in. What needs replacing?? Can anyone describe what to replace - if tran |
| alright guys. here is the latest. I undid the flyback from the splitter, and stuck it in a coke bo |
| If you've already replaced the capacitors (better spelling as "capacitators" :D ) and the power sup |
@Guest | @guest who recommends to replace all caps of the vertical driver unit
Okay, I agree that might be t |
| Yikes! Now it's getting complicated! I found the Power Transistors and ordered them through
htt |
sanyo tv model#ds35520 | needing service manual
or troubleshooting tips lightning got in tv blew main line fuse 4a replaced |
Dead Dell 1025HE | I'm attempting to repair a Dell 1025HE 17" monitor (essentially a Nokia 447S) for a friend.
sympt |
| Hi Mark thanks for ur clear & wide advice, I realy appriciate it.
1st Item, I had power ok. |
Sony KP-53V25 Problems | On your TV, is it the board on the right if you're looking at the back of the TV, or is it the board |
|
| Sorry, I don't know what I was thinking when writing last reply but I was used two 10MOhm resistors |
Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter an |
Sony CPD-100VS Service Manual | Hello! I am looking for the service manual for the sony monitor CPD-100VS. Even the parts list wou |
Orion Studio 710 | Hello
Need schematic for TV Orion Studio 710.
Only horizontal line… I replace V out TDA8174W with |
Pioneer SA-508 | Hi!
I need some help with this amplifier from pioneer. Since I can´t find service manual or |
measuring high value resistor? | i have a 1.8 Mega Ohm resitor, my meter can read up to 2 mega ohm, but when i try and read the value |
| How your wires (especially speakers) are routed around/by/through areas. For example you never want |
Thomson tv chasses tx91 ps dead | Hi all!
I have a tv to tepair, but I can't solve the problem.
The ps doesn't work at all. I have |
still having problems | when i first started testing the transistors one three blocks down from where i was testing blew out |
Zenith | JD, you either have blown STK`s (convergence IC`s) or R3243 is
bad, you don`t give enough info to l |
| if you used cheap amps, probably.
make sure the picos didnt just open back up again.
when you wo |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
PVY4665RK parts | Larry,tritronicsinc on line service says they don't have the resistor's,but
just today I found the |