Subject | Text |
| forget it, they are board level repair or mech complete.
need to align with sharp service remote af |
| From link:
Quick guide to removal/install of crt:
Tighten the lens adj nut.
Remove crt board, s |
|
| [img:3d4a02c950]http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs194.snc1/6533_146497210148_740460148_ |
| if "Ibbotsnm" wouldn't mind, I'd like a copy of the repair manual for this one?
Mine w |
| Not familiar with the specific unit, some mechanism loop basics to check when there is no schematic |
Re: UD-M50 trays | [quote="Ibbotsnm"]PS.
Forgot to mention, I can let you have a copy of the relevant repa |
| buy a new deck. the cd mech breaks and the only way to fix it is replace the whole cd mech, which a |
| MECHANICAL ALIGNMENT IS POSSIBLY INCORRECT, EVERYTHING ON THIS MODEL IS DRIVEN FROM THE SLED MOTOR, |
| Great guys, thank you very much :0)
I'll give that a go when I look at the mech fuse.
Thanks a |
| Actually have not been able to get to the switch - yet.
It is BURIED inside and inbetween about a t |