Subject | Text |
Toshiba 865B VCR digital auto & manual tracking ineffect | The tracking adjustment is normally relatively ineffective - with 'sparking' noise along lower part |
| disconnect the SCR gates, then monitor the voltage at the optoisolator,
check the specs of the SCR |
|
Re: philips 29PT5515/01 random switch to EXT1 | [quote:27ac07e204="Arinemot"]a noise signal is getting through EXT1, making the tv to automatically |
| Bob,
Before condeming any device, best to attempt to narrow it further.
Based on the age & |
| the Model number for the goodmans 28" widescreen is a GTV66W1 chassis no. 11AK19B-1
I have the sam |
| i`m currently making the same sort of project for my cars thermal fans , Two stage temp cut in cut o |
Panasonic EURO-4H TX-32PK25D H-OUT missing | Defect disappeared after replacing the digi-modul (F Board, TNP8EF008) by a used one (new modules ar |
Technics SU-X830 Service manual | I am searching the service manual for a TECHNICS SU-X830.
I have the following problem: The amplifi |
TV/Video Combination Machine Not Working | So I put a video in and hit rewind, this is a TV/Video combo Machine.
The company is Symphonic.
|
| Hi,
The clicking noise maybe due to your power supply trying to fire up ('click!') only to cut it |
DAEWOO DSP-4210GM SP110 chassis | hello fellow techs,
Does anyone have access to the partslist of the X-SUSTAIN board of a Plasma P |
| I suppose that you mean that the mains fuse blows instantly when you connect mains voltage to the un |
Toshiba TV (Model 3339DB) Service Manual or Guide | Does anyone have or know where I can find the above? It's a ~10 year old 4:3 tube TV
The tube is |
Pioneer sx-434, and Philps 22ah773/05 receivers | I am searching for this schematics, because this my receivers have a problem with radio signals. On |
Goodmans 11ak37 chassis | it will not come out of standby, power light pulsing.
i've managed to get the set to turn on by dis |
nec 50mp1 px-50xm1 power supply problem | Hello, I need some help identifying a component on my plasma power supply. It is a 5 pin sot-23 (I t |
| The zener, if connected between source and gate, is there to reduce damage caused by MOSFET failure, |
|
RCA Home Theatre Model P52812BL does not turn on | [b:0754ff1ff1]My 52" RCA TV was purchased on 2000 and it just now kicked the bucket. It would n |
83 ramcharger need help trouble shooting | I Just got an 83 ramcharger for free from a friend who moved out of state and the battery blew up on |
11AK19PRO Dead - LED is dead and it sounds intermitently | Hi
I need some help with a TV which has a 11AK19PRO Chassis.
First I had problems with Narrow pi |
Panasonic breadmachine SD207 | SD207 the motor is not running. The motor is OK and a new triac does not solve the problen (Origiona |
TV Philips 32pw8506, entering SDM via pins Not working! | Hi there.
I played around with the settings in the service alignment menu(SAM), and now unfortuna |
| Well, sadly the crackling noise is also in the headphones. SO now I need to go further back in the a |
philips fl 1.17 | Hello my problem is that i have a vertikal white line like noise or something in the right side of |
| I suppose that this transistor is located on the primary side of the power supply and that you are m |
Goodmans GHD1621F2 GHD2521F2 PVR Hard Drive Fault (Ticking) | Just fixed my uncle's GHD1621F2. Symptoms were that it 'couldn't find' the hard drive - the system |
IBM Monitor 6551-63N | I am experiencing a problem where the monitor appears to be either momentarily turning itself off an |
| I suppose that it is a single phase transformer ? Then, one possible way that it has delivered a too |
PANASONIC TX-2. need HELP!!! | I need The Service Manual for Panasonic TX-2. The TV set is dead and thereis an low frequency noise |
| Ok - job done!
Thanks very much for putting me onto that website vtech, excellent information.
T |