| Subject | Text |
| FLUKE 12 MULTIMETER | I wish to buy a fluke 12 multimeter. Or another fluke with high capacitance(uf) range for a reasonab |
| Racal Dana 5001 multimeter | Hi, I have one of these and I converted it to 240v from 110v no problem but I need to also make it 5 |
|
|
| nordmende galaxy 36 | Hello i have the above TV and my problem is that i have 300V instead of 130-140V any sugestion or di |
| Multimeter help | I'm simply trying to measure my resistors with a digital YFE YF-3503
but it doesn't seem to be work |
| Need Service manual Multimeter Ut55 | Hi I need to service manual for the UT55 multimeter by Uni-t. I especially require the mechanical c |
| nordmende sr210 | power problem i need the diagram |
| Nordmende Spectra_V_1404_SV | Hi guido2004,
i have the same problem. have you been able to solve the tick-tick-problem?
which wa |
| Which transistor blew? Was it a main output transistor or smaller one in the pre-amp stages? Why did |
| dvd power suply problem | dear cam,
from ur observation as transforemer has 8 pins on each side,power supply appears to be |
| [quote:1c2dcfd480="Anonymous"]Thanks for the reply! Yes, it does make a clicking sound when turning |
| check | if you have a multimeter ...check the output voltage ot the adaptor... be shure for right connection |
| Thanks for that, is it safe to test the 12v and 35v circuits with a multimeter? Im not going to get |
| The Vcc is +/- 36V DC which gives me a reading of 72V on the multimeter. Am I correct or not? :D |
| a most siple ... | a most simple temperature interface is germanium transistor B,K, to multimeter.... but is better to |
| DVD Player: "No disc" message when disc is on tray | Hi, I hope someone can help me with this.
I got a Coby DVD-223 some days ago, which wouldn't read D |
| Canon IXUS700 repair,where are the fuses? help, heres pics. | Hi there.
I have a 7mp Canon IXUS 700, it was dropped by my brother. So cant be fixed under warra |
| Hi!
First what comes to mind is that power supply had gone bad. And so it
can be 2 cases:
1)The |
|
|
| pnp npn transistor | excuse me for my bad english..
For test npn you have to use a multimeter and put positive lead to b |
| hi,
many thanks for replying.
is there a way to test the fbt.
the horizontal transistor see |
| Replace DP53 and CP51 with NEW components. They will check ok on your multimeter but will be probabl |
| Grundig ST-70 574 SAT--CUC 5820 | I make a post a week ago about a thermic problem, problem who now it is turn out to be a total failu |
| Acer hates AC power! Is ok only with battery | Proud owner of an Acer Aspire 1510 series that I am :D , I keep resoldering the power jack back into |
| Please help me to find pinouts or scheme | Hi , please help me to find pinouts on this device.
Data from box label is:
[color=red:8e4122426 |
| You need to check the output transistors for shorts. Test the forward junction voltage drop with a m |
| Sony KV-X2982U | Similar problems to another post on this site.
When switched on, standby light comes on and stays |
| Aiwa Tv, Model No TV-C201KER is not turning on, Help Plz. | Hi, I have Aiwa Tv of Model No TV-C201KER, but now it is not working, I have checked the power cord, |
| data sheet | I was delighted to locate a data sheet for my MASTECH M-830b multimeter.
I have blown R5 and R18 an |
| power problems | Check the High Voltage Transistor and the Voltage IC it is most likely one of those. The Transistor |
| changing from pal to NTSC | I have an old Nordmende TV set model 3031.I recently purchased a JVC video camera that only works on |
| Sharp 51DT25H stuck in standby | Hi everyone. I'm not a TV repair engineer by trade, but have been landed with a Sharp 51DT25H to rep |