| Subject | Text |
| Philips Plasma tv with Samsung PDA | I am have problems locating a manual with circuit diagrams for a plasma Plililps 42 PF9966/37 using |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
|
|
| In fact, I've bought this unit as faulty because I already bought one a few times ago and I've repai |
| hi minnie i have made a video to show you fault better
[url]http://www.youtube.com/watch?v=AKus6 |
| Re: need service manual / eeprom bin file for Pansonic TC-20 | [quote:6e5be55279="homerbernabe"]hello everybody,
could anybody having what i am looking for? Bina |
| 50MP1 blank screen with backlight, green light stays on | Hi Plasma TV experts,
I have a 50MP1 that powers on, there is one bright color line show up on t |
| z-sus | Hi,
The IC itself has no printed anything.On the cooler are some numbers like
4921qp1002b,second l |
| what type of pdp is fitted in the unit, for some lg plasmas there is a repair kit consisting of both |
| Depending on the brand, they'll tell you the digital main, logic, and driver/e buffer boards. When y |
| Before that,
SYMPTOM: Distorted or no picture
SOLUTION: In order to determine whether picture prob |
| service manuel | I need a service manuel for panasonic
[/i][/b] |
| Think I've found service manual, can someone confirm? | I found a 'service' related doc (pdf) here (Panasonic TX-25MD1):
http://www.eserviceinfo.com/down |
| [quote:30a24d7c00="Anonymous"]Hi,
These are out of warranty repairs, the PDP,s are fine as I have t |
| Can someone tell me, does a pdp hiss slightly?
I did notice that as the screen powers up there i |
| LG 42v6 Plasma Lower Y PCB Question | Hi,
Working on a Hitachi Plasma with the LG 42v6 PDP.
The display has a vertical data copy problem |
| classic symptom of a failed pdp |
| Part for Plasma TV LG MZ-42PZ24 | Hello,
i need the following part for my Plasma TV:
Model: 42SD3
LGE PDP 020417
Board: 42S |
|
|
| unfortuanetly that ribbon is an integral part of the plasma panel and is not replaceable on its own. |
| PX-42VM3G | Hi Pinkwell,
No problem, Im not sure regarding sourcing of the service manual. All i can tell you |
| Hi,
when I disconnect the two power connectors which goes to the PDP, it's still doing the same t |
| probably a faulty pdp, have a very close look at the screen, check for any blackened pixels. had the |
| LG MZ-42PZ24 Plasma TV | Hi,
Can anyone help with my plasma tv monitor problem, otherwise all I have is an expensive pictu |
| service manual for pnasonic NV-F70EI | Hello
If somenone has the service manual for the panasonic VCR NV-F70EI pls, could you contact me |
| there are to digital boards..
one is
LGE PDP 061120
Board 60X7-YSUS
Part # EAX 35342701
REV : |
| copy film from Sony handycam to VCR | I need help to copy film from a Hi8 Sony handycam to a Panasonic NV-35JEE VCR. I connected the handy |
| dead goodmans gtv42p | Hi i have a goodmans gtv42p which is stuck in stand by.It uses a sumsung pdp panel S42D-YD02. when p |
| samsung plasma PN58C550G1FXZA | Hello
I have a samsung with the pink banding issue BULLETIN NUMBER ASC20130528001
I have obtained |
| Thank you vtech for a thoughtful, if discouraging reply.
I screwed down the player unit and attac |
| LG 42V5 | I have an LG 42V5 that is frequencyerror in it.
The right side of the panels is lot of stripes, |
| Re: Part for Plasma TV LG MZ-42PZ24 | Hello,
you asked for LGE modul. Please tell me if you have found it. I have the same problem. If yo |