| Subject | Text |
| bush 29 ctv | [quote:1c665a5b46="GHvilks"]I need serviss manual with all shemtics, not only CD changer.[/quote:1c6 |
| Re: Opel corsa (c) need radio code | [quote:d38920336b="Dac"]Hi guys ,
Please help
i just buy opel corsa c 2001 and radio dosent w |
|
|
| there are different types of skipping. does it stay in one place and stutter, does it jump back, or |
| What kind of gate is it?
What motor drives the mechanism?
What are the connections like?
Are ther |
| YOUR FAULT IS PROBABLY THE OPTICAL BLOCK ITSELF, IT COMES COMPLETE WITH THE SPINDLE MOTOR AND SLED M |
| Sony service mode | Shematic of shassis AE-6B is hire:
http://www.eserviceinfo.com/
select BROWSE/CONSUMER ELECTR |
| re; toshibas | Hey guys, your english is great as far as I`m concerned, One thing
I forgot to mention is the color |
| Re: Need AZ1565 service | [quote="Werley"][color=blue:f03b38a33b]Hi, I need Philips AZ1565 Service ManuaL[quote:f03b38a33b]
I |
| It could be the pump or a fault on the control board, trying a replacement is one option to take.
|
| Service maual or schematic diagram for THORENS TD-105 | The motor rotates faster without being activated and adjusts the speed '.
Thanks in advance. |
| Panasonic vcr | suspect small plastic pulley on loading motor shaft, underneath mechanism
dont know panasonic part |
| Hitachi LCD TX38D95VC1CAM | Hello,
I just got this old Laptop from my boss who was gonna toss it out cause the thing stopped |
| about your tv/vcr... | by this time you probably junked it or got it fixed but im looking for schematics for mine and saw t |
| Re: intermittent tsjirping sound Neufunk TV model 2180 | [quote:65f7a262de="Morrowrj"]The intermittent chirping from my tv turned out to be the result of a s |
| RADIO CODE FOR PHILIPS RCC 600 | Hello there,
I have little problem. I need code for my radio.
PHILIPS
1 614 438
GM 90 506 |
| Having worked on many pioneers, am very familiar with your unit; Reason is rejecting, coz it's not a |
| CD READING PROBLEM | PART 2
IT IS NOW PLAYIN SELECTIVELY AT RANDOM .AND THEN NOTHING AT ALL.COULD YOU BREAK IT DOWN AN |
|
|
| DC Motor C4557-60003 from HP deskjet printer | I tested this motor,
it starts turning at 1V, very slowly. I was quite surprised by this.
At 6V it |
| Toshiba TV quits @ bright light | Hi everyone,
I know very little about electronics but I wanted to exhaust all my options before cal |
| hhheeelllp with wiring up an electronic thermostat kit | im stupid when it coes to electronics so ill ask u guys and u email me ur responses cheers
its a |
| TV schematic diagram | TO repair a television of my uncle i need the schematic of philips chassis 2b. In this site i found |
| Re: Blown Fuse - Troubleshoot Why | [quote:dffa48c5b5="huntro1"]vtech,
Thanks for your reply! To answer your question, above G1 and G2 |
| Back up to the driver IC and all the way to the microprocessor. You should be able to see some activ |
| Hello, will somebody help me fix a Sony TC-250A Reel deck?! | Hello world, I am an amateur DIY-er, and I am trying to fix a Sony TC-250A Reel-to-Reel deck! (A poo |
| Panasonic VCR Message F04 | Hi!
The link is below.
http://www.eserviceinfo.com/downloadsm/9064/Panasonic_K-Mech.html
I checke |
| opening your set (high voltage danger) | There is a high voltage wire in your set that if I remember right can carry over 10,000 volts. It i |
| Rear Projection won't power on - 50FX30B | I have a Hitachi 50FX30B rear projection set that won't power on, no power LED on fornt panel. It st |
| HP laserjet 4L - makes groaning noise | Main motor RG5-0765-000 (Worn gear is part of assy) |
| Re: denon udm3 | [quote:9288a09cb3="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
| HO2 USUALLY MEANS THE SPINDLE MOTOR IS NOT ROTATING, TAKE THE LID OFF AND WHILE THE DISPLAY SAYS REA |