Subject | Text |
want to build a power supply | hey guys [color=red:52718d60be]i want to build a power supply but not just any power supply i want t |
AKAI AX-M440 diagram | Have to repair the akai, and looks for the diagram, someone a tip?
Thanks
ON4VM |
|
Sony | hello again,
just remembering something : I once had the problem coming from the booster capacito |
| [quote:8ae4548891="TvPassion"]I do get the same failure. I tried by replacing the tuner twice but ap |
SONY KV-M2101D Chassis (label on tube) SCC-D85PA | Random colour dissapear for few hours/days and turns in B/W.
On display functions are coloured. Tel |
kenwood radio | First, you should check all of your speakers and speaker wires for shorts and grounds. If they chec |
| thank u zalds for tip. yes b+ is missing any tips appreciated
willtom |
| there is welding solders and there is PCB solder both use the same name. so now buy a pound of 30/60 |
| Hi Tanami,
I'll keep you updated. I can however give you some more information right away.
Whe |
| Thanks for the tip Boggs |
Re: Dell Inspiron 1150 Motherboard Circuit Layout | [quote:083b251c22="Anonymous"]I have just replaced the power jack connection on my laptop due to fal |
| Sue many times I find it easier to do away with the old lines all together if the problem is not eas |
| [quote:87b9f31b94="chappers"]Can also be due to firmware flash gone wrong. Do you have on-screen dis |
Re: LG Studioworks 700S 17" CRT Monitor - b&w colou | [quote:d3301e549f="mohhingman"]Hi All,
Here is a tip for a LG Studioworks 700S 17" CRT Monit |
CD PLAYER THAT JAMS YOU UP | HELLO, This a model that almost allways will jamb if moved during it's operation. There is an arm th |
| Here's a thought, use the ones you have untill you get the correct ones. Don't put back 10 volts rep |
| There is no problem using radial mount. As far as the short legs, you need to have a small tip sold |
|
soldering iron become black | I have a 25watt weller soldering iron and whenever i am about to solder i always clean the tip but i |
TOSHIBA CX2886/CX2885C | Thankyou very much for the guidance/tips. According to your tips i have checked/changed the suspecte |
Help!!! Ford car radio ESRT22DPS | I have problem with my Ford car radio mod.no. ESRT22DPS!
Tape works Normally but radio doesn`t work |
| Came across these tips for FL1.10 chassis;
[quote:c70eda226f]
Picture height cannot be adjusted |
super vhs gr-smx730 camcorder | :D hello, it is my first time on the board and I thought I would give it a try. I have been trying |
| As long as the metal tip is still on the end you should be good to go. |
soldering always getting a dull finish, dry ? | hi,
i bought a soldering atation and doing a bit of soldering work on a curcuit board,\
howeve |
| Hi,
Its fortunate u got the player to work fine after some adjustments.
However, its good to |
| Minnie i don't have a juvenator. i turned down the red bias and the bleeding goes away, but it seem |
27PT6441/37 Turn ON | I posted last week that I replaced the Thermistor and the set still had the 3-2-1 code and did not t |
| I do get the same failure. I tried by replacing the tuner twice but apparently nothing change.
Do |
| hi all,
did someone find some data about A60/70?
could you finally repair?
i have same problem wi |
| I have repaired hundreds of the ford radios, i repair car audio for a living, you need a soldering i |