| Subject | Text |
| A CRT (picture tube) have 3 electron guns,each with their own filament, (heater) so you should see a |
| Varistor marks, and Panasonic E110 | Hello,
I am new in forum and also in electronics but I have a little knowledge from my education. N |
|
|
| Testing the circuit is to be done with the power off!!
Do not apply power until you are sure you ha |
| [quote:e6a73c2eac="opal"]Thanks for the Info,
i have to addmit, im not into Musik really, so i dont |
| There could be many things...
I used to work with various Yamaha receivers & to the best of my |
| Blackline FX | Hello,
Many TV sets now have these screens : it is simple, you deal with a high quality picture t |
| There are two causes for this failure:
1) Faulty tube, but most of the times two colors won't dis |
| DIY Disasters | This is a common problem with Onkyos. There are about 10 muting transistors located on the preamp bo |
| New "findings" | OK, no one seems to care about this thread, but I'll post my latest thoughts about the red-level iss |
| Maybe this wire plugs onto the CRT board on the back of the tube? |
| thanks for the reply ill pop the back off of it again and give it look ..i did see a heatsinked to-2 |
| Schneider Scinema 3210 NVM Codes | Can anyone advise what are the default Schneider Scinema 3210 NVM Codes.
Service mode displays:
|
| Help on RPTV Sound | I have a Hitachi 61SWX10B about 3 1/2 years old. Recently the sound has been crackling and gets wors |
| ..did not know it had a mechanical volume control. As kenray suggested, try cleaning it with a clean |
| Re: Electronics parts for TV VCR AUDIO closing down | I would be interested in all of your CD mech's and parts. Test cd's also. Please let me know what yo |
| Re: Audio but no Video on Philips projection tv model 8p4834 | [quote:bb4b048c59="thetechman007"]Hey There, I will try to give you a hand, If There is no filament |
| Re: TV Problem | [quote:ca5516462e="bigboy"]:D
I have a 32" Sony projection TV. Latley when I turn it on I am get |
|
|
| 120 cycle hum of death! | I'm working on Kyocera receiver that is giving a nasty 120 Hz hum. It plays fine and sounds good onc |