| Subject | Text |
| MC13306T3 = TA8205 | Hi again...
Panasonic (Matsushita) claim which MC13306T3 (Dual power output IC for car audio) can |
| sony str-de875 | This receiver has one speaker that cuts out. Evidently the overload protector relays are subject to |
|
|
| Have to commend you on t'shooting ability & persistance. Based on your findings it sure points |
| Re: dvd Philips LX3600-disc dosn't turning | [quote:220bcf903f="Gen"]Hello everybody,
problem:
the motor disc is not turning on, after inser |
| Panasonic VCR Message F04 | First of all with the cover removed the start/end sensors may be picking up artificial light upsetti |
| SCMI---Great Test & Measurement Software for free downlo | website: http://www.virtins.com
PC version: http://www.virtins.com/SCMISetup.exe
Pocket PC Versio |
| Cheap a@@ computer. The VGA to HDMI will work if the video card supports it. The problem is there's |
| Hi, mbelec, | Hi, mbelec,
thanks for your reply...
Where would I see this error code ?
On the PC screen I ass |
| Ok, so what I found:
Ribbon cables are good.
LA6510 is the driver for both the head motor and |
| lg dvd player | I have an lg dvd player, but it only regnizes VCD but not DVD, the sensor ans the motor have voltage |
| Sony SSM-14N5E CCTV Monitor | Hello, I have a Sony SSM-14N5E CCTV monitor in witch i need to adjust RED-gain.
Tube seems OK, t |
| kenray is correct about most using a solder blob for ESD protection but, I believe your's is a dual |
| Too broad of a number--may be a house part number? Is there any logo on the IC package?
... it m |
| Mechanical manual for Sony SLV-E730 | Hi,
I am looking for the mechanical manual of this VCR because the caps motor always go in revers |
| What kind of gate is it?
What motor drives the mechanism?
What are the connections like?
Are ther |
| YOUR FAULT IS PROBABLY THE OPTICAL BLOCK ITSELF, IT COMES COMPLETE WITH THE SPINDLE MOTOR AND SLED M |
| Wanted - Panasonic VP-5231A Scope User Manual | Looking for a user manual for this oscilloscope.
Panasonic VP-5231A, 30Mhz dual channel.
I need th |
|
|
| If the i.c required is a dual audio amp i.c with component reference number on the board IC501 then |
| RCA 27R410T Chassis ITC008FAM | Actually mine doesn't even come up at all now. No flickers, no nothing. It does however have a hummi |
| Service maual or schematic diagram for THORENS TD-105 | The motor rotates faster without being activated and adjusts the speed '.
Thanks in advance. |
| Panasonic vcr | suspect small plastic pulley on loading motor shaft, underneath mechanism
dont know panasonic part |
| They don't look like power diodes. small dual smt diodes |
| Fixed my 32av500u | My backlight problem was fixed by replacing the Slave inverter board.
If anyone needs a Master inve |
| some came up i suspected the tune but i swapped for a known good oneand the hum and ramle on the FM |
| it doesn't actually say no disc. i insert dvd, it indexs into position, spins up, stops, spins up, s |
| CD READING PROBLEM | PART 2
IT IS NOW PLAYIN SELECTIVELY AT RANDOM .AND THEN NOTHING AT ALL.COULD YOU BREAK IT DOWN AN |
| DC Motor C4557-60003 from HP deskjet printer | I tested this motor,
it starts turning at 1V, very slowly. I was quite surprised by this.
At 6V it |
| Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
| It seems to be difficult to locate data for that part. However, it is clear that it is a dual FET tr |
| I traced back to the input of the motor control IC (SIP #BA6209N) pins 5-6 and do not see a logic le |