| Subject | Text |
| Same problem | I have a CP101 also with the low sound output problem.
I did a temp fix today by substituting Q330 |
| Service Manual | Hello!
Do You have Service Manual for HP ScanJet 6300c - SCSI/USB flatbed scanner...
I need s |
|
|
| It is clearly described in the USB standard which can be downloaded at http://www.usb.org/developers |
| Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| Hi,
As previously said, you will have a problem on the inverter board, responsible for stepping u |
| i need akira CT-29XG9ATS schematic diagram | HI...please helpp me
i need akira CT-29XG9ATS schematic diagram...i need value zener diode at psu p |
| Pioneer AM/FM Home Tuner model TX-960 | Hi,
I'm looking for schematic diagrams, particularly with DC voltages included, for a Pioneer dis |
| Playing around with power transformer output voltage | I have a transformer from a junked UPS. There are two primarys and a heavy duty secondary. If I fee |
| Re: Is this normal appearance for and amplifier IC?? | [quote:adc219a936="dan newberry"]I'm in uncharted territory (for me, anyway). I'm a radio tech--and |
| UPS problems; Having Harmonics and loss of capacity? | Hi
Just saw this letter/website...
Harmonics and loss of capacity? Firstly: Check the capacit |
| Service Manual MCS amp 3850 | I found this info on audioasylum.com:
A friend of mine just gave me his MCS integrated amp to |
| I have just had the same problem on my NR609 as Dire Wolf and others have noted: all working fine fo |
| Zenith | The most likely cause is that the horizontal output transistor has shorted and blown the power fuse. |
| You missed a few answers to questions I previously asked?
1) With good fuse and Primary wire floati |
| I do have a manual and I used to work with many Denon products several years ago. Not sure if that t |
| If you hooked up a Turntable (Phonograph), it could be a magnetic type cartridge in it, in which cas |
| crown lcd26fhd ,question | hello to all,i have a problem with crown lcd26fhd tv.
i`am from serbia and i need a usb update for |
|
|
| all electrolytes & zeners in primary or in secondary side ???
help
bt |
| Try to check the diode-bridge and main-switching-transitor/fet in the primary side of the power supp |
| What do you mean by the power transformer?
The primary ground needs to be isolated from the secon |
| [quote:0e72665aba="thetimewizard"]I own a clock shop and I repair and restore old clocks for a livin |
| Re: MP3Player & Technical Suport | [quote:2beeab4a7d="Wish"]Hi
Friends
my Mp3player is OMEGA S1
but during update firmware lost con |
| DELL A860 NON RESPONSIVE USBPORTS | Hello..
Now i have been working on a dell vostro a860 with a pair of usb ports that are non respons |
| Re: Onkyo TX-NR609 no sound | [quote:e847d64572="Dire Wolf"]My Onkyo TX-NR609 was working without a problem when switched off. Whe |
| TV SET REPAIRS | :D If you are in any doubt as to your ability to undertake any tv repair-dont!!!
There are certain |
| zenith tv | I assume it turns on now and again?
Depends on various factors is the standby led lit?
if not the |
| Re: panasonic tv - URGENT HELP PLEASE | [quote:35c3b5b82c="pun"]my panasonic tv ct-32sx12 won't turn on, it was working fine yesterday.....p |
| Attaching a headphone jack to a television? | If the set has a scart socket this should be used for connecting to an external audio device (normal |
| XWave Pro c300 car audio | Hello,
I have problem with XWave Pro c300 car audio (cd/usb/mmc).
It wont turn on. Standby curre |
| what i am trying to do is add in a couple of internal usb ports however I don't want to have to use |
