Text preview for : hfe_pioneer_bdp-23fd_en.pdf part of Pioneer hfe pioneer bdp-23fd en Pioneer Blue Ray BDP-23FD hfe_pioneer_bdp-23fd_en.pdf
Back to : hfe_pioneer_bdp-23fd_en.p | Home
Operating Instructions
Blu-ray Disc PLAYER
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly.
After you have finished reading the instructions, put them away in a safe place for future reference.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, CAUTION: The exclamation point within an equilateral
within an equilateral triangle, is intended to TO PREVENT THE RISK OF ELECTRIC triangle is intended to alert the user to the
alert the user to the presence of uninsulated SHOCK, DO NOT REMOVE COVER (OR presence of important operating and
"dangerous voltage" within the product's BACK). NO USER-SERVICEABLE PARTS maintenance (servicing) instructions in the
enclosure that may be of sufficient INSIDE. REFER SERVICING TO QUALIFIED literature accompanying the appliance.
magnitude to constitute a risk of electric SERVICE PERSONNEL.
shock to persons.
D3-4-2-1-1_A1_En
IMPORTANT NOTICE
THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR.
PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SECURE AREA.
THIS IS FOR YOUR SECURITY.
D1-4-2-6-1*_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user's right to operate
the equipment.
D8-10-2_A1_En
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use
shielded cables and connectors for connections.
D8-10-3a_A1_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. D6-8-2-1_En
2 This Class B digital apparatus complies with
En
Canadian ICES-003.
D8-10-1-3_A1_En
1) Read these instructions. 11) Only use attachments/accessories specified by the
2) Keep these instructions. manufacturer.
3) Heed all warnings. 12) Use only with the cart, stand, tripod, bracket, or
4) Follow all instructions. table specified by the manufacturer, or sold with the
5) Do not use this apparatus near water. apparatus. When a cart is used, use caution when
6) Clean only with dry cloth. moving the cart/apparatus combination to avoid
7) Do not block any ventilation openings. Install in injury from tip-over.
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding 13) Unplug this apparatus during lightning storms or
prong. The wide blade or the third prong are when unused for long periods of time.
provided for your safety. If the provided plug does 14) Refer all servicing to qualified service personnel.
not fit into your outlet, consult an electrician for Servicing is required when the apparatus has been
replacement of the obsolete outlet. damaged in any way, such as power-supply cord or
10) Protect the power cord from being walked on or plug is damaged, liquid has been spilled or objects
pinched particularly at plugs, convenience have fallen into the apparatus, the apparatus has
receptacles, and the point where they exit from the been exposed to rain or moisture, does not operate
apparatus. normally, or has been dropped.
P1-4-2-2_En
CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: inside of the unit
D3-4-2-1-8*_C_En
VENTILATION CAUTION Operating Environment
When installing this unit, make sure to leave space Operating environment temperature and humidity:
around the unit for ventilation to improve heat +5