Text preview for : 7jsmtm6.pdf part of panasonic 7jsmtm6 panasonic Audio SA-PTX7EB MD0704019CE doc 7jsmtm6.pdf
Back to : 7jsmtm6.pdf | Home
Item Key Operation
FL Display
Mode Name Description Front Key
CD laser drive CD laser drive current measurement. (Display 1) In STOP (no disc) mode,
current CD laser drive current is measured press [STOP] button on
measurement and the result is displayed together the main unit, and [3]
with the initial value stored in the button on the remote
EEPROM IC. control unit.
After the measurement, CD laser To exit, press [POWER]
emission is kept on. It is turned off CD laser current button.
when POWER key is switched off. measurement mode
FL Display sequence: The value denotes the current in decimal
Display 1 2. notation.
(Display 2)
Press [FL Display] on
remote control unit for next
page. (FL Display)
CD CD laser
laser initial value
value
The above example shows the initial current
is 0XXmA and the measured value is 0YYmA.
DVD Module DVD Module P.C.B. firmware version In STOP (no disc)
P.C.B. firmware is displayed on the FL Display. mode, press [STOP]
version display The firmware version can be updated button on the main unit,
using recovery disc. and [8] button on the
remote control unit.
System Cancelled automatically
controller 5 seconds later.
version
Destination
Note: It is necessary to check for System controller
firmware version before carrying out generation
the version up using the disc. Region No.: 0-8
(Display 1)
Communication Displays frequency of communication In STOP (no disc)
error display errors between system control IC and mode, press [STOP]
mechanism control IC in the DVD button on the main unit,
Module P.C.B. and [MENU] button on the
remote control unit.
FL Display sequence: Cancelled automatically
Display 1 2. No. of 5 seconds later.
communication
error
(Display 2)
Press [FL Display] on
remote control unit for next
page (FL Display).
No. of
communication