Text preview for : Panel_Kyocera_TCG150XGLBA-A00_0_[DS].pdf part of . Various Panel Kyocera TCG150XGLBA-A00 0 [DS] . Various LCD Panels Panel_Kyocera_TCG150XGLBA-A00_0_[DS].pdf



Back to : Panel_Kyocera_TCG150XGLBA | Home

Spec No. TQ3C-8EA00-E1DES04-00
SPEC Date August 24, 2009




TYPE : TCG150XGLBA-A00
< 15.0 inch XGA transmissive color TFT with LED backlight>




CONTENTS

1. General Description
2. Functional Block Diagram
3. Absolute Maximum Ratings
4. Electrical Characteristics
5. Signal Characteristic
6. Connector & Pin Assignment
7. Reliability Test Criteria
8. Mechanical Characteristics
9. Lot number identification
10. Warranty
11. Operating Precautions




KYOCERA CORPORATION
KAGOSHIMA HAYATO PLANT
LCD DIVISION
This specification is subject to change without notice.
Consult Kyocera before ordering.
Original Designed by: Engineering dept. Confirmed by: QA dept.
Issue Date Prepared Checked Approved Checked Approved

August 24, 2009
Spec No. Part No. Page
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00 -




Warning

1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control, home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.




2. Customer agrees to indemnify, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.
Spec No. Part No. Page
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00 -
Revision record
Designed by : Engineering dept. Confirmed by : QA dept.
Date
Prepared Checked Approved Checked Approved



Rev.No. Date Page Descriptions
Spec No. Part No. Page
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00 1

1. General Description

TCG150XGLBA-A00 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). All input signals are LVDS
interface compatible. All design rules of this module can correspond to PSWG standard.
TCG150XGLBA-A00 is designed for industrial display applications

.
1-1. Display Characteristics

The following items are characteristics summary on the table under 25condition:




M400180
Spec No. Part No. Page
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00 2


1-2. Optical Characteristics

The optical characteristics are measured under stable conditions at 25 (Room Temperature):




Note 1: Measurement method
Equipment: Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or
equivalent)
Aperture 1 with 50cm viewing distance
Test Point Center
Environment < 1 lux




M400180
Spec No. Part No. Page
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00 3


Note 2: Definition of 5 points position (Display active area: 246mm (H) x 184.5mm (V))




Note 3:
The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the
maximum test point luminance




Note 4 Definition of contrast ratio (CR):




Note 5: Definition of response time:
CT = | YB