Text preview for : DN1414 Manual .pdf part of . Various DN1414 Manual . Various SM scena Klark Teknik DN1414 Manual .pdf
Back to : DN1414 Manual .pdf | Home
DN1414
OPERATORS MANUAL
Version2
Klark Teknik Group,
Klark Teknik Building,
Walter Nash Road,
Kidderminster.
Worcestershire.
DY11 7HJ.
England.
Tel:+44 1562 741515
Fax:+44 1562 745371
Email: [email protected]
Website: www.klarkteknik.com
Walter Nash Road, Kidderminster, Worcestershire. DY11 7HJ. England
Tel: (44) (0) 1562 741515. Fax: (44) (0) 1562 745371
Company Registration No: 2414018
abc d abc
SI GN A L P R O CE SSI N G BY D E FI N I T I ON BETTER BY DESIGN DESIGNED FOR APURE PERFORMANCE
DECLARATION OF CONFORMITY
We, Klark Teknik Group (UK) Plc
of, Klark Teknik Building, Walter Nash Road, Kidderminster, Worcestershire, DY11 7HJ
Declare that a sample of the following product:-
Product Type Number Product Description Nominal Voltage (s) Current Freq
DN1414 115V AC 130mA 50/60Hz
230V AC 260mA
to which this declaration refers, is in conformity with the following directives and/or standards:-
Directive(s) Test Standard(s)
Generic Standard Using EN55103 Limits and Methods EN50081/1
Class B Conducted Emissions Pavi EN55103
CLass B Radiated Emissions Pavi EN55103
Fast Transient Bursts at 2Kv EN61000-4-4
Static Discharge at 4Kv EN61000-4-2
Electrical Stress Test EN60204
Signed:............................ Date: 4th February, 2000
Name: David Hoare
Authority: Technical Director, Klark Teknik Group (UK) Plc
Attention!
Where applicable, the attention of the specifier, purchaser, installer or user is drawn to special limitations of use
which must be observed when these products are taken into service to maintain compliance with the above
directives. Details of these special measures and limitations to use are available on request and are available
in product manuals.
A Subsidiary of Telex communications, Inc.
Contents
Thank you for using a Klark Teknik product Page 1
After you have unpacked Page 2
Introduction Page 3
Installation and Connection Page 4
Basic operation Page 5
Front Panel Page 6
Rear Pane Page 7
Rear panel blanking plate and iser multipole connectors Page 8
Block Diagram Page 9
Applications Page 10
Appendices Page 11
Specifications Page 12
Schematics Page 13
Thank You For Using This Klark Teknik Product
.
To obtain maximum performance from this precision electronic product, please study these instructions
carefully. Installation and operating the mic splitter is not complicated, but the flexibility provided by its
operating features merits familiarisation with its controls and connections. This unit has been prepared to
comply with the power supply requirements that exist in your location.
Precautions
Do not install this unit in a location subjected to excessive heat, dust or mechanical vibration.
Voltage Selection and Power Connection
Connection is made by means of an IEC standard power socket. The rear panel text indicates the voltage
range required for satisfactory operation of the unit.
Before connecting this unit to the mains supply, ensure the fuse fitted is the correct type and rating is as
indicated on the rear panel, adjacent to the fuse holder.
Safety Warning
This unit is fitted with 3-pin power socket: For safety reasons the earth lead should not be disconnected.
Signal ground is referenced internally to chassis via a resistor capacitor network which provides earth
loop immunity.
To prevent shock or fire hazard, do not expose the unit to rain or moisture. To avoid electrical shock do
not remove covers. Refer servicing to qualified personnel only.
Attention!
Cables:
This product should only be used with high quality, screened twisted pair audio cables, terminated either
with metal bodied 3-pin XLR connectors(with the cable screen connected to pin 1) or