Text preview for : Panel_CMO_V270W1-L01_1_[DS].pdf part of . Various Panel CMO V270W1-L01 1 [DS] . Various LCD Panels Panel_CMO_V270W1-L01_1_[DS].pdf
Back to : Panel_CMO_V270W1-L01_1_[D | Home
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Nov. 24, 2003
Model No.: V270W1 - L01
Approval
TFT LCD Approval Specification
MODEL NO.: V270W1 - L01
Customer:
Approved by:
Note:
1 / 27
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO 's representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Nov. 24, 2003
Model No.: V270W1 - L01
Approval
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION ------------------------------------------------------- 5
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 6
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM ------------------------------------------------------- 11
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 BLOCK DIAGRAM OF INTERFACE
5.4 LVDS INTERFACE
5.5 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING ------------------------------------------------------- 16
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 18
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING ------------------------------------------------------- 22
8.1 PACKING SPECIFICATIONS
8.1 PACKING METHOD
9. DEFINITION OF LABELS ------------------------------------------------------- 24
9.1 CMO MODULE LABEL
10. PRECAUTIONS ------------------------------------------------------- 25
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL CHARACTERISTICS ------------------------------------------------------- 26
2 / 27
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO 's representative while your product design is based on this specification. Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Nov. 24, 2003
Model No.: V270W1 - L01
Approval
REVISION HISTORY
Page
Version Date Section Description
(New)
Ver 0.1 Feb.23, 02 All All Tentative Specification was second issued.
Ver 0.2 May 02, 03 18 7.2 Note(1)
Add "Viewing angles are measured by EZ-Contrast 160R (Eldim)"
19 Note(4)
The driving signal means the signal of gray level 0,63,127,191,255.
20 Note(7)
The LCD module should be stabilized at given temperature for 30
minutes 1hour to avoid abrupt temperature change during
measuring. In order to stabilize the luminance, the measurement should
be executed after lighting Backlight for 30 minutes 1 hour in a
windless room.
20 Note(7)
The drawing is updated.
21 8 Add Packing description
23 9 Add Label definition
25-26 11 The drawing of mechanical characteristics is updated.
Ver 1.0 June 03,03 18 7.2 Min. Typ. Max.
Color Chromaticity Green Gx (0.239)(0.269)(0.299)
Gy (0.570)(0.600)(0.630)
25-26 11 The drawing of mechanical characteristics is updated.
Ver 1.1 July 01,03 4 1.4 Pixel Pitch