Text preview for : Panel_AUO_T315HW02_V0_CELL_0_[DS].pdf part of . Various Panel AUO T315HW02 V0 CELL 0 [DS] . Various LCD Panels Panel_AUO_T315HW02_V0_CELL_0_[DS].pdf
Back to : Panel_AUO_T315HW02_V0_CEL | Home
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
0/22
No Reproduction and Redistribution Allowed
Document Version: 0.1
Date: 2009/03/24
Product Specifications
32" FHD Color TFT-LCD SKD Panel
Model Name: T315HW02
() Preliminary Specifications
(*) Final Specifications
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
1/22
No Reproduction and Redistribution Allowed
Contents
No ITEM
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTION MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATIONS
3-4 SIGNAL TIMING WAVEFORMS
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE for LCD
4 OPTICAL SPECIFICATIONS
5 MECHANICAL CHARACTERISTICS
6 AUO's BASIC BLU OPTICAL PERORMANCE
7 RELIABILITY
8 PACKING
9 PRECAUTIONS
9-1 MOUNTING PRECAUTIONS
9-2 OPERATING PRECAUTIONS
9-3 ELECTROSTATIC DISCHARGE CONTROL
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5 STORAGE
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
2/22
No Reproduction and Redistribution Allowed
Record of Revision
Version Date No Old Description New Description Remark
0.0 2009/03/04 First Release
0.1 2009/03/24 Final spec
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
3/22
No Reproduction and Redistribution Allowed
1. General Description
This specification applies to the 31.5 inch Color TFT-LCD SKD Panel T315HW02 V0. This LCD open cell unit
has a TFT active matrix type liquid crystal panel with 1920x1080 pixels, and its diagonal size is 31.5 inch. This
open cell unit supports 1920x1080 HDTV mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixel or dot which is arranged in vertical stripes. Gray scale
or the brightness of the sub-pixel color is determined with an 8-bit gray scale signal for each dot.
The T315HW02 V0 has been designed to apply to 8-bit and 2 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are
very important.
General Information
Items Specification Unit Note
Active Screen Size 31.51 inches
Display Area 698.4 (H) x 392.85 (V) mm
Cell outline Dimension 717.585(H) x 411.17(V) x 1.82(D) mm
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1920x1080 Pixel
Pixel Pitch 0.36375 mm
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
Contrast ratio 4000:1 Base on AUO BLU
Brightness 500 nit Base on AUO BLU
Surface Treatment AG, 3H Haze = 11%
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
4/22
No Reproduction and Redistribution Allowed
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to
the unit.
Item Symbol Min Max Unit Note
Logic/LCD Drive Voltage Vdd -0.3 14 [Volt] 1
Input Voltage of Signal Vin -0.3 3.6 [Volt] 1
o
Operating Temperature TOP 0 +50 [ C] 2
Operating Humidity HOP 10 90 [%RH] 2
o
Storage Temperature TST -20 +60 [ C] 2
Storage Humidity HST 10 90 [%RH] 2
Note
1, Duration = 50 msec
2, Maximum Wet-Bulb should be 39 and No condensation.
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
5/22
No Reproduction and Redistribution Allowed
3. Electrical Specification
The T315HW02 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. An inverter typically generates the second input, which powers the CCFL.
3-1 Electrical Characteristics
Value
Parameter Symbol Unit Note
Min Typ Max
LCD:
Power Supply Input Voltage Vcc 10.8 12 13.2 Vdc
Power Supply Input Current Icc - 0.65 0.75 A 1
Power Consumption Pc - 7.8 9 Watt 1
Inrush Current IRUSH - - 6 A 1
Note
1, Vcc=5.0V, Fv=60Hz, Fclk= 85.0 MHz , 25 . , Test Pattern : White Pattern
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
6/22
No Reproduction and Redistribution Allowed
3-2 Interface Connections
Connector on Panel: JAE FI-RE51S-HF (Manufactured by JAE
Note:
1. All GND (ground) pins should be connected together and should also be connected to the LCD's metal frame.
All Vcc (power input) pins should be connected together.
2. For Pin 10, 27 and 28, panel will not damage if negligently connect these pins to high or low
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
7/22
No Reproduction and Redistribution Allowed
LVDS Option = High/Open, NS mode
ORXCLK+
ORXCLK-
ORX0 OR0 OG0 OR5 OR4 OR3 OR2 OR1 OR0 OG0
ORX1 OG1 OB1 OB0 OG5 OG4 OG3 OG2 OG1 OB1
ORX2 OB2 DE VS HS OB5 OB4 OB3 OB2
ORX3 OR6 OB7 OB6 OG7 OG6 OR7 OR6
ERXCLK+
ERXCLK-
ERX0 ER0 EG0 ER5 ER4 ER3 ER2 ER1 ER0 EG0
ERX1 EG1 EB1 EB0 EG5 EG4 EG3 EG2 EG1 EB1
ERX2 EB2 DE VS HS EB5 EB4 EB3 EB2 DE
ERX3 ER6 EB7 EB6 EG7 EG6 ER7 ER6
Note:
Odd data is the first priority.
First data is odd.
LVDS Option = Low (0V) , JEIDA mode
ORXCLK+
ORXCLK-
ORX0 OR2 OG2 OR7 OR6 OR5 OR4 OR3 OR2 OG2
ORX1 OG3 OB3 OB2 OG7 OG6 OG5 OG4 OG3 OB3
ORX2 OB4 DE VS HS OB7 OB6 OB5 OB4
ORX3 OR0 OB1 OB0 OG1 OG0 OR1 OR0
ERXCLK+
ERXCLK-
ERX0 ER2 EG2 ER7 ER6 ER5 ER4 ER3 ER2 EG2
ERX1 EG3 EB3 EB2 EG7 EG6 EG5 EG4 EG3 EB2
ERX2 EB4 DE VS HS EB7 EB6 EB5 EB4 DE
ERX3 ER0 EB1 EB0 EG1 EG0 ER1 ER0
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
8/22
No Reproduction and Redistribution Allowed
3-3 Signal Timing Specifications
This is the signal timing required at the input of the User connector. All of the interface signal timing
should be satisfied with the following specifications for the proper operation.
* Timing Table
Signal Item Symbol Min. Typ. Max. Unit
Period Tv 1090 1125 1480 Th
Vertical
Section Active Tdisp(v) 1080 Th
Blanking Tblk (v) 10 45 400 Th
Period Th 1030 1100 1325 Tclk
Horizontal
Active Tdisp(h) 960 Tclk
Section
Blanking Tblk (h) 70 140 365 Tclk
LVDS Clock Frequency Fclk (1/Tclk) 50 74.25 82 MHz
Vertical
Frequency Fv 47 60 63 Hz
Frequency
Horizontal
Frequency Fh 60 67.5 73 kHz
Frequency
Notes:
1.) Di splay position is specific by the rise of DE signal only.
Horizontal display position is specified by the falling edge of 1st DCLK right after the rise of ENAB, is displayed on the
left edge of the screen.
Vertical display position is specified by the rise of DE after a "Low" level period equivalent to eight times of horizontal
period. The 1st data corresponding to one horizontal line after the rise the of ENAB is displayed at the top line of screen.
3.) If a period of DEB "High" is less than 1920 DCLK or less than 1080 lines, the rest of the screen displays black.
4.) The display position does not fit to the screen if a period of DE "High" and the effective data period do not
synchronize with each other
Copyright AU Optronics, Inc.
January, 2008 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.1
9/22
No Reproduction and Redistribution Allowed
3-4 Signal Timing Waveforms