Text preview for : Panel_LG_Display_LM181E1-J3MN_0_[DS].pdf part of . Various Panel LG Display LM181E1-J3MN 0 [DS] . Various LCD Panels Panel_LG_Display_LM181E1-J3MN_0_[DS].pdf
Back to : Panel_LG_Display_LM181E1- | Home
LM181E1-J3MN
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 18.1" SXGA TFT LCD
BUYER GENERAL SUPPLIER LG.Philips LCD Co., Ltd.
MODEL *MODEL LM181E1
SUFFIX J3MN
*When you obtain standard approval,
please use the above model name without suffix.
SIGNATURE DATE APPROVED BY DATE
/ S.H. Kang / G.Manager
REVIEWED BY
B.G. Kim / Manager
/ J.T. Kim / Manager
PREPARED BY
E.S. Chang / Engineer
/ J.K. Choi / Engineer
Please return 1 copy for your confirmation Product Engineering Dept.
with your signature and comments. LG.Philips LCD Co., Ltd.
Ver 0.4 October 31, 2000 Page 1/24
LM181E1-J3MN
Liquid Crystal Display
Product Specification
CONTENTS
NO. ITEM Page
- COVER 1
- CONTENTS 2
- RECORD OF REVISION 3
1 GENERAL DESCRIPTION 4
2 MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTION 7
3-3 SIGNAL TIMING SPECIFICATIONS 9
3-4 SIGNAL TIMING WAVE FORMS 10
3-5 COLOR INPUT DATA REFERENCE 11
3-6 POWER SEQUENCE 12
4 OPTICAL SPECIFICATIONS 13
5 MECHANICAL CHARACTERISTICS 15
6 RELIABILITY 18
7 INTERNATIONAL STANDARDS 19
7-1 SAFETY 19
7-2 EMC 19
8 PACKING 20
8-1 DESIGNATION OF LOT MARK 20
8-2 PACKING FORM 20
9 PRECAUTIONS 21
APPENDIX 23
A-1 OPTICAL CHARACTERISTIC MEASUREMENT EQUIPMENT AND METHOD 23
A-2 LUMINANCE 23
A-3 RESPONSE TIME 23
A-4 VIEWING ANGLE 24
Ver 0.4 October 31, 2000 Page 2/24
LM181E1-J3MN
Liquid Crystal Display
Product Specification
RECORDS OF REVISIONS
Version No Date Page DESCRIPTION
0.1 July 28, 2000 - Preliminary
0.2 Sept 08, 2000 p13 Changed the Gamma value : 2.1 2.7
p14 Changed the Gray scale
p18 Update the ESD Test conditions
0.3 Sept 18, 2000 p12 Changed the power sequences
T2 Min : - 0.01ms
T4 Min : 100ms 0.01ms
T6 Min : 50ms 0.01ms
p13 Added the Cross talk
p14 Update the Gray scale
0.4 Oct 31, 2000 p6 Changed the established starting voltage at 0
1550 1500
Ver 0.4 October 31, 2000 Page 3/24
LM181E1-J3MN
Liquid Crystal Display
Product Specification
1. General Description
The LM181E1-J3MN is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode
Fluorescent Lamp(CCFL) back light system. The matrix employs a-Si Thin Film Transistor as the active
element. It is a transmissive type display operating in the normally black mode. This TFT-LCD has a 18.1
inch diagonally measured active display area with SXGA resolution(1024 vertical by 1280 horizontal pixel
array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal
for each dot, thus, presenting a palette of more than 16,777,216 colors.
The LM181E1-J3MN has been designed to apply the interface method that enables low power, high
speed low EMI. FPD Link must be used as a LVDS(Low Voltage Differential Signaling) chip.
The LM181E1-J3MN is intended to support applications where thin thickness, wide viewing angle, low
power are critical factors and graphic displays are important. In combination with the vertical arrangement
of the sub-pixels, the LM181E1-J3MN characteristics provide an excellent flat panel display for office
automation products such as monitors.
G1
LVDS
RGB(F)
Gate Driver circuit
LVDS #1
pair #1 CLK,DTMG
CN1 HSYC,VSYNC Timing TFT-LCD Panel
(21pin)
CLK Controller
LVDS (1280 x RGB x 1024 pixels)
pair #2 LVDS
#2
RGB(S)
G1024
S1 S1280
RGB
Power Source Driver Circuit
+12V CN2
Circuit
IVAA (5pin)
Block
CN3/4
Backlight Assembly(4CCFL)
CN5/6
General Features
The following are general feature of the model LM181E1-J3MN LCD;
Active screen size 18.1 inches(45.97cm) diagonal
Outline dimensions 412.5(H)