Text preview for : Panel_SAMSUNG_LTM230HT05_0_[DS].pdf part of . Various Panel SAMSUNG LTM230HT05 0 [DS] . Various LCD Panels Panel_SAMSUNG_LTM230HT05_0_[DS].pdf
Back to : Panel_SAMSUNG_LTM230HT05_ | Home
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Customer : HP DATE : 10 /Nov / 2010
SAMSUNG TFT-LCD
TFT-
MODEL : LTM230HT05
Any Modification of Specification is not allowed without SEC's Permission.
NOTE : For Glare project
PREPARED BY DATE
Customer's Approval 10/Nov/'10
SIGNATURE DATE APPROVAED BY DATE
10/Nov/'10
Application Engineering Part 3, LCD Business
Samsung Electronics Co . , LTD.
S El t i C LTD
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 1/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Contents
Revision History -------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------- (4)
G lD i ti
1. Absolute Maximum Ratings -------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------- (7)
3. Electrical Characteristics -------------------------------------------------------------------------(12)
3.1
3 1 TFT LCD Module
3.2 Back Light Unit
4. Block Diagram ------------------------------------------------------------------------------------ (16)
4.1 TFT LCD Module
4.2 Back Light Unit
5.
5 Input Terminal Pin Assignment --------------------------------------------------------------- (17)
5.1 Input Signal & Power
5.2 LVDS Interface
5.3 Back Light Unit
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing ---------------------------------------------------------------------------------- (26)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
6.4 VDD Power Dip Condition
7. Outline Dimension -------------------------------------------------------------------------------- (30)
8. Reliability -------------------------------------------------------------------------------------------- (32)
y ( )
9. Packing --------------------------------------------------------------------------------------------- (33)
10. Marking & Others ------------------------------------------------------------------------------- (34)
11. General Precaution ----------------------------------------------------------------------------- (36)
11.1 Handling
11.2 Storage
11.3 Operation
11.4 Others
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 2/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
* Revision History Approval Specification
Rev.
Date Page Summary
No
Nov 10, 000 all Approval specification of LTM230HT05 was issued first.
2010
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 3/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
General Description Approval Specification
Description
LTM230HT05 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT (Thin Film Transistor) as switching components. This model is composed of
a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 23.0" is 1920
x 1080 and this model can display up to 16.7 millions colors.
Features
High contrast ratio, high aperture structure
High speed response
FHD (1,920 x 1,080 pixels) resolution
(1 920 1 080
White LED Edge slim Backlight (1-side)
DE (Data Enable) only mode
LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
RoHS, Halogen Free
TCO 03' compliance
Applications
Workstation & desktop monitors
Display terminals for AV application products
Monitors for industrial machine
* If the module is used to other applications besides the above, please contact SEC
in advance.
General Information
Items Specification Unit Note
Pixel Pitch 0.2655(H) x 0.2655(W) mm
Active Display Area 509.76(H) x 286.74(V) mm
Surface Treatment Glare , Hard coating (3H)
Display Colors 16.7M (Hi-FRC) colors
Number of Pixels 1,920 x 1,080 pixel
Pixel Arrangement RGB vertical stripe
Display Mode Normally White
Luminance of White 250(Typ.) cd/
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 4/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Mechanical Information
Item Min. Typ. Max. Unit Note
Horizontal (H) 533.5 534.0 534.5 mm
-
Module Vertical (V) 311.2 311.7 312.2 mm
size
Partially 12.3mm in the circuit area.
Depth (D) - - 12.0 mm
Refer to the page 30.
Weight - - 2,200
2 200 g LCD module only
Note (1) Mechanical tolerance is 0.5mm unless there is a special comment.
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
Item Symbol Min.
Min Max.
Max Unit Note
Power Supply Voltage VDD GND-0.5 6.5 V (1)
Data Signal Vsig - 5 V
Storage temperature TSTG -25 60 (2)
Center of Glass surface temperature
TOPR 0 50 (2)
(Operation)
Shock ( non - operating ) Snop - 50 G (3)(5)
Vibration ( non - operating ) Vnop - 1.5 G (4)(5)
Note (1) Ta= 25 2 C
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 5/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta 39 C)
b. Maximum wet-bulb temperature at 39 C or less. (Ta 39 C)
c.
c No condensation
(3) 11ms, sine wave, one time for X, Y, Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
(5) At vibration and shock test, the fixture which holds the module to be tested has to be
hard and rigid enough so that the module would not be twisted or bent by the fixture.
(39,90)
(50 50 4)
(50,50.4)
(60,27.7)
(-25,5)
Fig. Temperature and Relative humidity range
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 6/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Optical Characteristics Approval Specification
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : SR-3, RD-80S (TOPCON), EZ-Contrast (Eldim)
(Ta = 25 2 C VDD=5V fv= 60Hz, fDCLK=69 3MHz If = 252mA)
C, VDD=5V, 60Hz fDCLK=69.3MHz,
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (3)
C/R 700 1000 -
(Center of screen) SR-3
Response (5)
On/Off Tr + Tf - 5 8 msec
Time(On/Off) RD-80S
Luminance of White (6)
YL 200 250 - cd/m2
(Center of screen) SR-3
Rx 0.633
Red
Ry 0.340
Gx 0.320
Green
Color Gy 0.622
Chromaticity -0.030 +0.030
(CIE 1931) Bx 0.155
Blue Normal
By L,R=0
0.042
U,D=0
,
Wx 0.313
White Viewing (7),(8)
Wy Angle 0.329
SR-3
Ru' - 0.436 -
Red
Rv' - 0.527 -
Gu' - 0.130 -
Color Green
Chromaticity Gv' - 0.570 -
(CIE 1976) Bu' - 0.194 -
Blue
Bv' - 0.118 -
Wu' - 0.198 -
White
Wv' - 0.468 -
C.G.L
White u'v' - - 0.02 (9)
(ACC ONLY)
* C.G.L : Color Grayscale Linearity
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 7/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Item Symbol Condition Min. Typ. Max. Unit Note
Color Gamut - - 72 - %
Color Temperature - - 6500 - K
L 70 85 -
Hor.
70 85 - (8)
Viewing R
CR10 Degrees EZ-
Angle 70 80 -
U Contrast
V
Ver.
D 70 80 -
Brightness Uniformity (4)
Buni - - 25 %
(9 Points) SR-3
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
30min ft li hti th b k li ht t th i
30 i after lighting the back light at the given temperature for stabilization
t t f t bili ti
of the back light. This should be measured in the center of screen.
LED current : 252mA Environment condition : Ta = 25 2 C
Photo detector
Photo detector Field
SR-3 2
Field
SR-3 : 40
RD-80S : 50
TFT - LCD Module
LCD Panel
The center of the screen
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 8/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Note (2) Definition of test point
192 960 1728
Active Area
9 8 7 108
6 5 4 540
3 2 1
972
: Test Point
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel
G max
CR
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
Note (4) Definition of 9 points brightness uniformity
( B max B min)
Buni 100 u
B max
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (5) Definition of Response time : Sum of Tr, Tf
Display Data
p y White(TFT off)
( ) Black(TFT on)
( ) White(TFT off)
( )
Optical Instruments 100%
Response
90%
10%
0%
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 9/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Note (6) Definition of Luminance of White : Luminance of white at center point
Note (7) Definition of Color Chromaticity (
( ) y (CIE 1931, CIE1976)
, )
Color coordinate of Red, Green, Blue & White at center point
Note (8) Definition of Viewing Angle
: Viewing angle range (CR 10)
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 10/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Note (9) Color Grayscale Linearity
a. Test image : 100% full white pattern with a test pattern as below
b. Test pattern : Squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and
105 grays steps should be arranged at the center of the screen.
c. Test method
-1st gray step : move a square of 255 gray level should be moved into the center of the
screen and measure luminance and u' and v' coordinates.
- Next gray step : Move a 225 gray square into the center and measure both
luminance and coordinates, too.
,
d. Test evaluation
'u' v' = (u' A - u' B) 2 + (v' A - v' B) 2
Where A, B : 2 gray levels found to have the largest color differences between them
i.e. get the largest u' and v' of each 6 pair of u' and v' and calculate the u'v'.
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 11/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Characteristics Approval Specification
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Ta = 25 C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 4.5 5.0 5.5 V (1)
Differential Input High - - +100 mV (2)
Voltage for LVDS
Receiver Threshold Low -100 - - mV
LVDS skew tSKEW -300 300 ps (3)
LVDS
Input Differential input
|VID| 200 600 mV (4)
Characteri voltage
stics
Input voltage range
VIN 0 2.4
24 V (4)
(single-ended)
Common mode 0+ 2.4-
VCM 1.2 V (4)
voltage |VID|/2 |VID|/2
(a) Black - 1,400 - mA
Current of
Power (b) White IDD - 900 - mA (5),(6)
Supply
(c) Dot - 1,800 2,200 mA
Vsync Frequency fV 49.0 60.0 75.0 Hz
Hsync Frequency fH 54.2 66.0 83.8 kHz
Main Frequency fDCLK 56.4 67.3 83.0 MHz
Rush Current IRUSH - - 5.0 A (7)
Note (1) The ripple voltage should be controlled under 10% of VDD.
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 12/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
(2) Differential receiver voltage definitions and propagation delay and transition time test
circuit
a. All input pulses have frequency = 10MHz, tR or tF=1ns
b.
b CL includes all probe and fixture capacitance
Note a.
Note b.
(3) LVDS Receiver DC parameters are measured under static and steady conditions
which may not be reflective of its performance in the end application.
T
LVDS Clk VDIFF= 0V VDIFF= 0V Differential
LVDS Data Differential
RX +/-
tSKEW
where tskew : skew between LVDS clock & LVDS data, ,
T : 1 period time of LVDS clock
cf) (-/+) of 300psec means LVDS data goes before or after LVDS clock.
(4) Definition of VID and VCM using single-end signals
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 13/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
(5) fV=60Hz, fDCLK = 69.3MHz, VDD = 5.0V, DC Current.
(6) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) Dot Pattern
(7) Measurement Condition
VDD
100%
90%
10%
GND
TRUSH=470
Rush Current IRUSH can be measured when TRUSH. is 470 .
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 14/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
3.2 Back Light Unit
3.2.1 The characteristics of LED tile
The back light unit is composed of WLED.
Ta=25 2C
Item Symbol Min. Typ. Max. Unit Note
LED Forward Current IF - 252 260 mA -
LED Forward Voltage VF 56.1 59.5 V -
Operating Life Time Hr 30,000
30 000 - - Hour (2)
Note (1) The above specification is not for converter output, but for the LED bar.
Each LED bar is consist of 68ea LED packages ; 4 parallel X 17 serial
(2) Life time (Hr) is defined as the time when brightness of a LED package itself
becomes 50% or less than its original value at the condition of Ta=25 2 C
and IF =63mA
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 15/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. BLOCK DIAGRAM Approval Specification
4.1 TFT LCD Module
RSDS
S S
Control signal Source Driver ICs
LVDS S1 S1920
pair #1
RSDS(Tx)
LVDS (Rx)
Control signal Column Driver Circuit
LVDS
pair #2
CN1
(30pin) TFT-LCD
(1920 x RGB x 1080 pixels)
i l )
Timing Controller
+5.0V
VDD Power
Circuit
4.2 Back Light Unit
Connector: Yenho 12507WR-06L (6-pin connector)
LED Return
LED Power
Signal
LED Power
LED bar 6-pin connector
LED Return
Signal
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 16/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5. Input Terminal Pin Assignment
5.1. Input Signal & Power (Connector : UJU IS100-L30B-C23 or equivalent )
PIN NO SYMBOL FUNCTION
1 RXO0N Negative LVDS differential data output
2 RXO0P Positive LVDS differential data output
3 RXO1N Negative LVDS differential data output
4 RXO1P Positive LVDS differential data output
5 RXO2N Negative LVDS differential data output
6 RXO2P Positive LVDS differential data output
7 GND Ground
8 RXOCN Negative LVDS differential Clock output
9 RXOCP Positive LVDS differential Clock output
10 RXO3N Negative LVDS differential data output
11 RXO3P Positive LVDS differential data output
12 RXE0N Negative LVDS differential data output
13 RXE0P Positive LVDS differential data output
14 GND Ground
15 RXE1N Negative LVDS differential data output
16 RXE1P Positive LVDS differential data output
17 GND Ground
18 RXE2N Negative LVDS differential data output
19 RXE2P Positive LVDS differential data output
20 RXEC- Negative Sampling Clock (EVEN data)
21 RXEC+ Positive Sampling Clock (EVEN data)
22 RXE3N Negative LVDS differential data output
23 RXE3P Positive LVDS differential data output
24 GND Ground
25 NC CE (Digital VR Enable Signal)
26 NC CTL (Digital VR Control Signal)
27 NC No Connection
28 VDD Power Supply : +5V
29 VDD Power Supply : +5V
30 VDD Power Supply : +5V
pp y
* If the system already uses the 25, 26pins, it should keep under GND level
The voltage applied to those pins should not exceed -200mV.
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 17/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
Note) Pin number starts from Left side
PCB
Pin No. 1 Pin No. 30
#1 #30
UJU IS100-L30B-C23
IS100 L30B C23
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the
LCD's metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 18/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.2 LVDS Interface (1)
5.2.1 Odd Pixel Data (1st pixel data)
LVDS Transmitter ( DS90C383 DS90C385 ) Signal Interface
DS90C383,
To LTM230HT05
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
51 TXIN0 RO0 Red Odd Pixel Data (LSB)
52 TXIN1 RO1 Red Odd Pixel Data
TXOUT0- No.
No 1 RXO0-
54 TXIN2 RO2 Red Odd Pixel Data
TXOUT0+ No. 2 RXO0+
55 TXIN3 RO3 Red Odd Pixel Data
56 TXIN4 RO4 Red Odd Pixel Data
TXOUT3- No. 10 RXO3-
2 TXIN5 RO7 Red Odd Pixel Data (MSB)
TXOUT3+ No. 11 RXO3+
3 TXIN6 RO5 Red Odd Pixel Data TXOUT0- No. 1 RXO0-
4 TXIN7 GO0 Green Odd Pixel Data (LSB) TXOUT0+ No. 2 RXO0+
6 TXIN8 GO1 Green Odd Pixel Data TXOUT1- No. 3 RXO1-
7 TXIN9 GO2 Green Odd Pixel Data TXOUT1+ No. 4 RXO1+
8 TXIN10 GO6 Green Odd Pixel Data TXOUT3- No. 10 RXO3-
10 TXIN11 GO7 Green Odd Pixel Data (MSB) TXOUT3+ No. 11 RXO3+
11 TXIN12
12 GO3 Green Odd Pixel Data
G O
12 TXIN13 GO4 Green Odd Pixel Data TXOUT1- No. 3 RXO1-
14 TXIN14 GO5 Green Odd Pixel Data TXOUT1+ No. 4 RXO1+
15 TXIN15 BO0 Blue Odd Pixel Data (LSB)
16 TXIN16 BO6 Blue Odd Pixel Data TXOUT3- No. 10 RXO3-
18 TXIN17 BO7 Blue Odd Pixel Data (MSB) TXOUT3+ No. 11 RXO3+
TXOUT1- No. 3 RXO1-
19 TXIN18 BO1 Blue Odd Pixel Data
TXOUT1+ No. 4 RXO1+
20 TXIN19 BO2 Blue Odd Pixel Data
22 TXIN20 BO3 Blue Odd Pixel Data TXOUT2- No. 5 RXO2-
23 TXIN21 BO4 Blue Odd Pixel Data TXOUT2+ No. 6 RXO2+
24 TXIN22 BO5 Blue
Bl Odd Pi l D t
Pixel Data
TXOUT3- No. 10 RXO3-
50 TXIN27 RO6 Red Odd Pixel Data
TXOUT3+ No. 11 RXO3+
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 19/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.2.2 Even Pixel Data (2nd pixel data)
LVDS Transmitter ( DS90C383, DS90C385 ) Signal Interface
To LTM230HT05
T LTM230HT0
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
51 TXIN0 RE0 Red Even Pixel Data (LSB)
52 TXIN1 RE1 Red Even Pixel Data
TXOUT0- No. 12 RXE0-
54 TXIN2 RE2 Red Even Pixel Data
TXOUT0+ No.
No 13 RXE0+
55 TXIN3 RE3 Red Even Pixel Data
56 TXIN4 RE4 Red Even Pixel Data
TXOUT3- No. 22 RXE3-
2 TXIN5 RE7 Red Even Pixel Data (MSB)
TXOUT3+ No. 23 RXE3+
3 TXIN6 RE5 Red Even Pixel Data TXOUT0- No. 12 RXE0-
4 TXIN7 GE0 Green Even Pixel Data (LSB) TXOUT0+ No 13
No. RXE0+
6 TXIN8 GE1 Green Even Pixel Data TXOUT1- No. 15 RXE1-
7 TXIN9 GE2 Green Even Pixel Data TXOUT1+ No. 16 RXE1+
8 TXIN10 GE6 Green Even Pixel Data TXOUT3- No. 22 RXE3-
10 TXIN11 GE7 Green Even Pixel Data (MSB) TXOUT3+ No. 23 RXE3+
11 TXIN12 GE3 Green Even Pixel Data
12 TXIN13 GE4 Green Even Pixel Data TXOUT1- No. 15 RXE1-
14 TXIN14 GE5 Green Even Pixel Data TXOUT1+ No. 16 RXE1+
15 TXIN15 BE0 Blue Even Pixel Data (LSB)
16 TXIN16 BE6 Blue Even Pixel Data TXOUT3- No. 22 RXE3-
18 TXIN17 BE7 Blue Even Pixel Data (MSB)
( ) TXOUT3+ No. 23 RXE3+
TXOUT1- No. 15 RXE1-
19 TXIN18 BE1 Blue Even Pixel Data
TXOUT1+ No. 16 RXE1+
20 TXIN19 BE2 Blue Even Pixel Data
22 TXIN20 BE3 Blue Even Pixel Data TXOUT2- No. 18 RXE2-
23 TXIN21 BE4 Blue Even Pixel Data TXOUT2+ No. 19 RXE2+
24 TXIN22 BE5 Blue Even Pi l D t
Bl E Pixel Data
TXOUT3- No. 22 RXE3-
50 TXIN27 RE6 Red Even Pixel Data
TXOUT3+ No. 23 RXE3+
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 20/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.2 LVDS Interface (2)
5.2.3 Odd Pixel Data (1st pixel data)
LVDS Transmitter ( DS90C387 ) Signal Interface
To LTM230HT05
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
10 R10 RO0 Red Odd Pixel Data (LSB)
9 R11 RO1 Red Odd Pixel Data
A0M No.
No 1 RXO0-
RXO0
8 R12 RO2 Red Odd Pixel Data
A0P No. 2 RXO0+
7 R13 RO3 Red Odd Pixel Data
6 R14 RO4 Red Odd Pixel Data
A3M No. 10 RXO3-
3 R17 RO7 Red Odd Pixel Data (MSB)
A3P No. 11 RXO3+
5 R15 RO5 Red Odd Pixel Data A0M No. 1 RXO0
RXO0-
2 G10 GO0 Green Odd Pixel Data (LSB) A0P No. 2 RXO0+
1 G11 GO1 Green Odd Pixel Data A1M No. 3 RXO1-
100 G12 GO2 Green Odd Pixel Data A1P No. 4 RXO1+
94 G16 GO6 Green Odd Pixel Data A3M No. 10 RXO3-
93 G17 GO7 Green Odd Pixel Data (MSB) A3P No. 11 RXO3+
99 G13 GO3 Green Odd Pixel Data
96 G14 GO4 Green Odd Pixel Data A1M No. 3 RXO1-
95 G15 GO5 Green Odd Pixel Data A1P No. 4 RXO1+
92 B10 BO0 Blue Odd Pixel Data (LSB)
86 B16 BO6 Blue Odd Pixel Data A3M No. 10 RXO3-
85 B17 BO7 Blue Odd Pixel Data (MSB) A3P No. 11 RXO3+
A1M No. 3 RXO1-
91 B11 BO1 Blue Odd Pixel Data
A1P No. 4 RXO1+
90 B12 BO2 Blue Odd Pixel Data
89 B13 BO3 Blue Odd Pixel Data A2M No. 5 RXO2-
88 B14 BO4 Blue Odd Pixel Data A2P No. 6 RXO2+
87
8 B15
B1 BO5
BO Blue
Bl Odd Pi l D
Pixel Data
A3M No. 10 RXO3-
4 R16 RO6 Red Odd Pixel Data
A3P No. 11 RXO3+
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 21/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.2.4 Even Pixel Data (2nd pixel data)
LVDS Transmitter ( DS90C387 ) Signal Interface
To LTM230HT05
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
84 R20 RE0 Red Even Pixel Data (LSB)
81 R21 RE1 Red Even Pixel Data
A4M No. 12 RXE0-
80 R22 RE2 Red Even Pixel Data
A4P No.
No 13 RXE0+
79 R23 RE3 Red Even Pixel Data
78 R24 RE4 Red Even Pixel Data
A7M No. 22 RXE3-
75 R27 RE7 Red Even Pixel Data (MSB)
A7P No. 23 RXE3+
77 R25 RE5 Red Even Pixel Data A4M No. 12 RXE0-
74 G20 GE0 G E Pi l D t
Green Even Pixel Data (LSB) A4P No 13
No. RXE0+
73 G21 GE1 Green Even Pixel Data A5M No. 15 RXE1-
72 G22 GE2 Green Even Pixel Data A5P No. 16 RXE1+
66 G26 GE6 Green Even Pixel Data A7M No. 22 RXE3-
65 G27 GE7 Green Even Pixel Data (MSB) A7P No. 23 RXE3+
71 G23 GE3 Green Even Pixel Data
70 G24 GE4 Green Even Pixel Data A5M No. 15 RXE1-
69 G25 GE5 Green Even Pixel Data A5P No. 16 RXE1+
64 B20 BE0 Blue Even Pixel Data (LSB)
58 B26 BE6 Blue Even Pixel Data A7M No. 22 RXE3-
57 B27 BE7 Blue Even Pixel Data (MSB) A7P No. 23 RXE3+
A5M No. 15 RXE1-
63 B21 BE1 Blue Even Pixel Data
A5P No. 16 RXE1+
62 B22 BE2 Blue Even Pixel Data
61 B23 BE3 Blue Even Pixel Data A6M No. 18 RXE2-
60 B24 BE4 Blue Even Pixel Data A6P No. 19 RXE2+
59 B25 BE5 Blue Even Pi l D t
Bl E Pixel Data
A7M No. 22 RXE3-
76 R26 RE6 Red Even Pixel Data
A7P No. 23 RXE3+
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 22/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.2.5 Timing Diagrams of LVDS For Transmitting
LVDS Receiver : Integrated T-CON
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 23/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.3 Back Light Unit
LED Bar input connector : TBD
Pin Name Description
1 Channel 1 Channel 1 return signal
2 Channel 2 Channel 2 return signal
3 Vin LED power input
4 Vin LED power input
5 Channel 3 Channel 3 return signal
6 Channel 4 Channel 4 return signal
Note ) Pin number starts from Left side
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 24/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY S
RED GREEN BLUE
CO O
COLOR DISPLAY
S CALE L
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 EVEL
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -
GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -
CYAN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BASIC
RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
COLOR
MAGENTA 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -
YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -
WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1
DARK
0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY
: : : : : : : : : : : : : : : : : : : : : : : : R3~
SCALE
: : : : : : : : : : : : : : : : : : : : : : : : R252
OF RED
1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R253
LIGHT
0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R254
RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R255
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0
0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1
DARK
0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY
SCALE : : : : : : : : : : : : : : : : : : : : : : : : G3~
OF : : : : : : : : : : : : : : : : : : : : : : : : G252
GREEN 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G253
LIGHT
0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G254
GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G255
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 B1
DARK
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 B2
GRAY
: : : : : : : : : : : : : : : : : : : : : : : : B3~
SCALE
: : : : : : : : : : : : : : : : : : : : : : : : B252
OF BLUE
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 B253
LIGHT
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 B254
BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 B255
Note (1) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 25/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
6. Interface Timing
6.1 Timing Parameters ( DE only mode )
SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE
Clock 1/TC 56.4 67.3 83.0 MHz -
Hsync Frequency FH 54.2 66.0 83.8 kHz -
Vsync FV 49 60 75 Hz -
Active
Vertical Display TVD 1080 1080 1080 Lines -
Display Term Period
Vertical Total TV 1105 1111 1118 Lines -
Active
2pixel/
Display THD 1920 1920 1920 Clocks
Horizontal clock
Period
Display Term
Horizontal 2pixel/
TH 1980 2020 2080 clocks
Total clock
Note (1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal Vcc = 5.0V
(3) While operating, DE signal should have the same cycle.
(4) Main frequency Max is 85MHz without spread spectrum.
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 26/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
6.2 Timing diagrams of interface signal ( DE only mode )
TV
TVD TVB
DE
TH
THD
DE
DCLK
TC
DATA
SIGNALS
TC
TCH TCL
DCLK 0.5
VCC
TDS TDH
DISPLAY 0.5
DATA
VCC
TES
DE 0.5
VCC
MODEL LTM230HT05 Doc. No 05-000-S-101110 Page 27/38
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Approval Specification
6.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
sequence should be as the diagram below
below.