Text preview for : S2531LN.pdf part of Panasonic WV-S2531LN Service manual for Network camera WV-S2531LN and WV-S2511LN
Back to : S2531LN.pdf | Home
ORDER NO. AVS1610029C0
Network Camera
Model No. WV-S2531LN
WV-S2511LN
WV-S2531LN
WV-S2531LN
CONTENTS
PARTS AND FUNCTIONS........................................... 1-1 CONDUCTOR VIEW
INSERT / REMOVE AN SD MEMORY CARD ............. 1-8 IF BOARD ............................................................. 4-1
WIRING DIAGRAM ...................................................... 2-1 CPU BOARD ......................................................... 4-3
OVERALL BLOCK DIAGRAM .................................... 2-2 IR-LED L BOARD .................................................. 4-4
SCHEMATIC DIAGRAM IR-LED R BOARD ................................................. 4-5
IF BOARD (1/3) ..................................................... 3-1 SW BOARD ........................................................... 4-6
IF BOARD (2/3) ..................................................... 3-2 HEATER BOARD .................................................. 4-7
IF BOARD (3/3) ..................................................... 3-3 EXPLODED VIEW
CPU BOARD(1/4).................................................. 3-4 (1/5) MAIN UNIT-1 ............................................... 5-1
CPU BOARD(2/4).................................................. 3-5 (2/5) MAIN UNIT-2 ............................................... 5-2
CPU BOARD(3/4).................................................. 3-6 (3/5) UNDER CASE UNIT .................................... 5-3
CPU BOARD(4/4).................................................. 3-7 (4/5) CAMERA UNIT ASS'Y ................................. 5-4
IR-LED L BOARD .................................................. 3-8 (5/5) PACKAGING ................................................ 5-5
IR-LED R BOARD ................................................. 3-9 REPLACEMENT PARTS LIST ................................... 6-1
SW BOARD ......................................................... 3-10 CHANGE HISTORY ......................................................7-1
HEATER BOARD ................................................ 3-11
© Panasonic i-PRO Sensing Solutions Co., Ltd. 2020
Unauthorized copying and distribution is a violation of law.
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could result
in serious injury or death.
This symbol warns the user that uninsulated voltage within the
CAUTION unit may have sufficient magnitude to cause electric shock.
RISK OF ELECTRIC SHOCK Therefore, it is dangerous to make any kind of contact with any
DO NOT OPEN
inside part of this unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER This symbol alerts the user that important literature concerning
SERVICEABLE PARTS INSIDE. the operation and maintenance of this has been included.
REFER SERVICING TO QUALIFIED SERVICE Therefore, it should be read carefully in order to avoid any
PERSONNEL. problems.
IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are indicated
by the " " mark on the schematic diagram and the replacement parts list. It is essential that these critical parts
should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
If a wiring unit is supplied as a repair part, the entire wiring unit shall be replaced, rather than repairing and
connecting the wires, even when only some of its wires are broken.
About Lead Free Solder (PbF)
Distribution of PbF PCB:
PCBs (manufactured) using lead free solder (PbF) will have a stamp on the PCB.
Caution:
Lead free solder has a higher melting point than standard solder. Typically the melting points is 35 °C 40 °C
(95 °F 104 °F) higher. Please use a soldering iron with temperature control and adjust it to 360 °C 370 °C
(680 °F 698 °F). In case of using high temperature soldering iron, please be careful not to heat too long.
Lead free solder will tend to splash when heated too high (600 °C / 1112 °F).
Lead free solder (Sn - 3.0Ag 0.5Cu) or equivalents are recommended on repairing our lead free soldered PCB.
LITHIUM BATTERY
WARNING CAUTION
The lithium battery in this equipment must only be Danger of explosion if battery is incorrectly replaced.
replaced by qualified personnel. When necessary, contact Replace only with the same or equivalent type recom-
your local Panasonic supplier. mended by the equipment manufacturer. Discard used
batteries according to manufacture's instructions.
PILE AU LITHIUM
AVERTISSEMENT ATTENTION
La batterie au lithium de cet équipement doit être Risque d'explosion si la batterie est remplacée de façon
remplacée par un technicien qualifié. Veuillez contacter incorrecte.
votre fournisseur Panasonic local si nécessaire. Remplacez-la uniquement par une batterie de même modèle
ou d'un type équivalent recommandé par le fabricant de
l'équipement. Jetez les batteries usagées conformément
aux instructions du fabricant.
PRECAUTIONS FOR HANDLING THE RAIN WASH COATING FRONT COVER
· The surface of the front cover for this product has been treated with rain wash coating.
· The rain wash coating has the ability to reduce the formation of water drops on the surface of the front
cover, but this does not imply the prevention or reduction of water drop formation in all installation
environments. Similarly, effectiveness varies depending on the way that rain falls, thus effectiveness in
reducing rain drop formation is not guaranteed for all types of rain.
· The effectiveness of the rain wash coating gradually deteriorates. There are cases in which the
lifespan of the rain wash coating may be accelerated due to deterioration caused by the installation
environment. For example, early coating detachment may occur in places where sand is blown by
strong winds, places where conditions cause physical chipping of the coating, places near the coast
where strong salts adhere to the coating, or places where chemical agents such as organic solvents
are drifting in the atmosphere. Avoid usage in such areas.
· Rain wash effectiveness may be reduced at the following types of installation sites:
Places where oil film such as from oily smoke adheres to the rain wash coating.
Places where chemicals with water-shedding properties are drifting in the air.
· Avoid touching the rain wash coating front cover surface with your hands, as the skin oils or other oils
and chemicals may become attached to the coating, causing damage to the effectiveness.
· When cleaning the dome cover, hose or spray fresh water that is not containing lubricant agent or
silicon substances and wash away adherents such as grain of sand. If dirt is hard to remove, use a
sponge soaked into the fresh water mentioned above and wipe off.
· Do not wipe the cover with a dry cloth.
(Using dry cloth may spread oil constituent adhered to the surface, and it may result in damaging the
rain wash coating.)
· If dirt cannot be wiped off with a damp cloth, use a neutral detergent and sufficiently rinse off the
detergent.
· Do not use organic solvent such as benzine and thinner.
· Before using a spray, abandon a few sprays to eliminate impurities.
· The mark of light-shielding parts left inside the dome or dirt on the dorm cover may influence the
reflection of infrared rays.
Therefore, remove those marks and dirt using cleaning paper.
* Improper cleaning of the dome cover may cause the rain wash coating to become less effective. In this
case, in order to have effective rain wash coating, a new dome cover must be purchased to replace
the existing dome cover.
SPECIFICATIONS
The Product with PbF
· Basic
1
Power source * : DC 12 V
PoE (IEEE802.3af compliant)
1
Power consumption * : DC 12 V : 750 mA/Approx. 9.0 W
PoE DC 48 V : 195 mA/Approx. 9.4 W (Class 0 device)
Operating environment
2
Ambient operating temperature: 40 °C to +60 °C * {40 °F to 140 °F}
(Power On range: 30 °C to +60 °C {22 °F to 140 °F})
Ambient operating humidity: 10 % to 100 %
Storage environment
Storage temperature: 30 °C to +60 °C {22 °F to 140 °F}
Storage humidity: 10 % to 95 % (no condensation)
Monitor output VBS: 1.0 V [p-p]/75 , composite, ø3.5 mm mini jack
(for adjustment): An NTSC or PAL signal can be outputted from camera
(either press the INITIAL SET switch quickly (within 1 second)
or use software to select NTSC or PAL signal).
External I/O terminals: ALARM IN 1 (DAY/NIGHT IN, Auto time adjustment input) (x1)
ALARM IN 2 (ALARM OUT) (x1)
ALARM IN 3 (AUX OUT) (x1)
Audio input: ø3.5 mm stereo mini jack
Input impedance: Approx. 2 k (unbalanced)
For microphone input: Recommended applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Recommended sensitivity of microphone: -48 dB±3 dB
(0 dB=1 V/Pa, 1 kHz)
For line input: Input level: Approx. 10 dBV
3
Audio output * : ø3.5 mm stereo mini jack (Audio output is monaural.)
Output impedance: Approx. 600 (unbalanced)
Output level: 20 dBV
4
Waterproof * : Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliant
Shock resistance: 50 J (IEC 60068-2-75) / Compliant with IK10 (IEC62262)
Dimensions: Installing using the base bracket:
ø164 mm × 139 mm (H) {ø6-15/32 inches × 5-15/32 inches (H)}
Dome radius 42 mm {1-21/32 inches}
Installing on a wall or a ceiling directly using the attachment plate:
ø154 mm × 103 mm (H) {ø6-1/16 inches × 4-1/16 inches (H)}
Dome radius 42 mm {1-21/32 inches}
Mass: When using base bracket:
Approx. 1.6 kg {3.53 lbs}
When using attachment plate:
Approx. 1.2 kg {2.65 lbs}
Finish: Main body:
Aluminum die cast, Light gray
Outer fixing screws:
SUS (Corrosion-resistant treatment)
Dome cover:
Polycarbonate resin (with rain wash coating), Clear
5
Others: Tamper-resistant enclosure*
*1 Refer to our website (http://security.panasonic.com/support/info/) for further information about Power source and
Power consumption information.
*2 In the environment where IR-LED is always turned on, make sure that the temperature is between 40° C and
+50 °C {40 °F to 140 °F}.
*3 The audio output can be switched to the monitor output. Refer to the "Operating Instructions" on the provided CD-
ROM for descriptions of how to switch the output.
*4 Only when installation work is properly performed according to the Installation Guide and appropriate waterproof
treatment is performed.
*5 Component that has a structure on which the screws that are accessible after installation cannot be screwed or un-
screwed using an ordinary screwdriver
· Camera
Image sensor: 1/3 type MOS image sensor
Effective pixels: Approx. 2.4 mega pixels
Scanning area: 5.28 mm (H) × 2.97 mm (V) {7/32 inches (H) × 1/8 inches (V)}
Scanning system: Progressive
Minimum illumination: WV-S2531LN
Color : 0.012 lx {0.00111 footcandle}
(F1.6, Maximum shutter: Off (1/30 s), AGC: 11)
0.0008 lx {0.00007 footcandle}
(F1.6, Maximum shutter: max. 16/30 s, AGC: 11)*
BW : 0 lx {0 footcandle}
(F1.6, Maximum shutter: OFF (1/30 s), AGC: 11, when the IR LED is lit)
0.006 lx {0.00056 footcandle}
(F1.6, Maximum shutter: Off (1/30 s), AGC: 11)
0.0004 lx {0.00004 footcandle}
(F1.6, Maximum shutter: max. 16/30 s, AGC: 11)*
WV-S2511LN
Color : 0.008 lx {0.00074 footcandle}
(F1.6, Maximum shutter: Off (1/30 s), AGC: 11)
0.0005 lx {0.00005 footcandle}
(F1.6, Maximum shutter: max. 16/30 s, AGC: 11)*
BW : 0 lx {0 footcandle}
(F1.6, Maximum shutter: OFF (1/30 s), AGC: 11, when the IR LED is lit)
0.004 lx {0.00037 footcandle}
(F1.6, Maximum shutter: Off (1/30 s), AGC: 11)
0.0003 lx {0.00003 footcandle}
(F1.6, Maximum shutter: max. 16/30 s, AGC: 11)*
* Converted value
Intelligent auto: On/ Off
Super Dynamic: On / Off, the level can be set in the range of 0 to 31.
* When 60 fps is selected, the Super Dynamic function is automatically set to off.
Dynamic range: 144 dB typ. (Super Dynamic: On)
Maximum gain (AGC): The level can be set in the range of 0 to 11.
Adaptive black stretch: The level can be set in the range of 0 to 255.
Back light compensation (BLC) BLC/ HLC/ Off
/High light compensation (only when Super Dynamic/ Intelligent auto: Off)
(HLC):
Fog compensation: On/ Off (only when Intelligent auto / auto contrast adjust: Off)
Light control mode setting: Outdoor scene/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ Fix shutter
Shutter speed: 1/30 Fix, 3/120 Fix, 2/100 Fix, 2/120 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix,
1/1000 Fix, 1/2000 Fix, 1/4000 Fix, 1/10000 Fix
*1/30 Fix to 2/100 Fix is available during 30 fps mode only.
*2/120 Fix is available during 60 fps mode only.
Maximum shutter: Max.1/4000s, Max.1/2000s, Max.1/1000s, Max.1/500s,
Max.1/250s, Max.1/120s, Max.1/100s, Max.2/120s, Max.2/100s,
Max.3/120s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s,
Max.10/30s, Max.16/30s
*Max.2/100s and Max.3/120s are available during 30 fps mode only.
Color/BW: Off/ On(IR Light Off)/ On(IR Light On)/ Auto1(IR Light Off)/
Auto2(IR Light On)/ Auto3(SCC)
IR LED Light: High/ Middle/ Low/ Off
Maximum irradiation distance: 40 m {Approx. 131 ft}
White balance: ATW1/ ATW2/ AWC
Digital noise reduction: The level can be set in the range of 0 to 255.
Stabilizer: On/ Off (available only in the 30 fps mode)
Privacy zone: On/ Off (up to 8 zones available)
Camera title on screen: On/ Off
Up to 20 characters (alphanumeric characters, marks)
Video Motion Detection (VMD): On/ Off, 4 areas available
Image rotation: 0 °/ 90 °/ 180 °/ 270 °
· Lens
Zoom ratio: 3.6x Optical zoom
WV-S2531LN
10.8x Extra optical zoom is available (when resolution is 640x360).
(Motorized zoom / Motorized focus)
WV-S2511LN
7.2x Extra optical zoom is available (when resolution is 640x360).
(Manual zoom / Motorized focus)
Digital (electronic) zoom: Choose from 3 levels of x1, x2, x4
Focal length: 2.8 mm 10 mm {1/8 inches 13/32 inches}
Maximum aperture ratio: 1:1.6 (WIDE) 1:3.4 (TELE)
Focus range: 0.3 m {11-13/16 inches}
Aperture range: F1.6 T405
Angular field of view: [16:9 mode]
Horizontal: 30 ° (TELE) 108 ° (WIDE)
Vertical: 17 ° (TELE) 58 ° (WIDE)
[4:3 mode]
Horizontal: 25 ° (TELE) 90 ° (WIDE)
Vertical: 19 ° (TELE) 65 ° (WIDE)
Adjusting angle: Horizontal: ±180 °
Vertical: +85 ° to 30 °
Yaw: ±100°
· Network
Network: 10BASE-T/100BASE-TX, RJ45 connector
1
Resolution* : WV-S2531LN
H.265/ H.264 2 mega pixel [16:9] (30 fps mode)/
JPEG (MJPEG) 2 mega pixel [16:9] (60 fps mode)
1920x1080, 1280x720, 640x360, 320x180
3 mega pixel [4:3] (30 fps mode)
2
2048x1536* , 1280x960, 800x600, VGA, 400x300, QVGA
WV-S2511LN
1.3 mega pixel [16:9] (30 fps mode)/
1.3 mega pixel [16:9] (60 fps mode)
1280×720, 640×360, 320×180
1.3 mega pixel [4:3] (30 fps mode)
1280×960, 800×600, VGA, 400×300, QVGA
3
Image compression method * :
H.265/ H.264 Transmission priority:
Constant bit rate / Variable bit rate / Frame rate / Best effort
Frame rate:
1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/30 fps*/ 60 fps*
* The frame rate is limited to "bit rate". When a value with an asterisk
(*) is selected, the actual frame rate may be lower that the value selected.
Bit rate per client:
64 kbps/ 128 kbps*/ 256 kbps*/ 384 kbps*/ 512 kbps*/ 768 kbps*/ 1024 kbps*/
1536 kbps*/ 2048 kbps*/ 3072 kbps*/4096 kbps*/ 6144 kbps*/ 8192 kbps*/
10240 kbps*/ 12288 kbps*/ 14336 kbps*/ 16384 kbps*/ 20480 kbps*/ 24576 kbps*
* The available range of the bit rate varies depending on the setting selected for
"image capture size".
Image quality:
· For "Constant bit rate", "Frame rate", and "Best effort":
Motion priority/ Normal/ Quality priority
· "VBR":
0 Super fine/1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
Transmission type:
Unicast/ Multicast
JPEG (MJPEG) Image quality:
0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/ 9 LOW (10 steps: 0-9)
Transmission type: Pull/ Push
Refresh interval:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps/ 10fps/ 12fps/
15fps/ 30fps
(JPEG frame rates are limited when using JPEG and H.265/H.264 simultaneously)
Smart coding: Smart Facial Coding*
On(Smart Facial Coding)/ On(AUTO VIQS)/ Off
* Smart Facial Coding is only available with Stream(1).
GOP(Group of pictures) control
On(Advanced)*/ On(Low)/ On(Mid)/ Off
*On(Advanced) is only available with H.265.
Audio compression method: G.726 (ADPCM) : 32 kbps/ 16 kbps
G.711 : 64 kbps
AAC-LC*4 : 64 kbps/ 96 kbps/ 128 kbps
Bandwidth control: Unlimited/ 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/
1024 kbps/ 2048 kbps/ 4096 kbps/ 6144 kbps/ 8192 kbps/ 10240 kbps/
15360 kbps/ 20480 kbps/ 25600 kbps/ 30720 kbps/ 35840 kbps/
40960 kbps/ 51200 kbps
Protocol: IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, DHCPv6,
RTP, MLD, ICMP, ARP
IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP,
DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
Security: User authentication / Host authentication / HTTPS*
/ Alteration detection of video file*
* The certification is pre-installed.
5
OS* : Microsoft Windows 10
Microsoft Windows 8.1
Microsoft Windows 8
Microsoft Windows 7
5
Browser* : Windows Internet Explorer 11 (32-bit)
Windows Internet Explorer 10 (32-bit)
Windows Internet Explorer 9 (32-bit)
Windows Internet Explorer 8 (32-bit)
Maximum concurrent 14 (Number of sessions that can connect to cameras at the same time)
access number: * Depends on network conditions
FTP client: Alarm image transmission, FTP periodic transmission (When the FTP transmission
is failed, backup on an optional SD memory card is available.)
Multi-screen: Up to 16 camera images can be displayed simultaneously on a multi-screen.
(Including the camera itself)
Compatible SDXC/SDHC/SD Manufactured by Panasonic (SD speed class 4 or higher)
6 7
memory card* , * SDXC memory card : 64 GB, 128 GB
SDHC memory card : 4 GB, 8 GB, 16 GB, 32 GB
SD memory card : 2 GB
(except miniSD memory card and microSD memory card)
Cellular phone compatibility: JPEG image,
AUX control (by access level)
TM
Mobile terminal compatibility: iPad / iPhone (iOS 4.2.1 or later), Android mobile terminals
8
(As of August, 2016)*
*1 H.265/H.264 can be selected for each stream.
*2 Used by super resolution techniques.
*3 Transmission for 4 streams can be individually set.
*4 Only use AAC-LC (Advanced Audio Coding - Low Complexity) when recording audio on an SD memory card.
*5 For further information about PC system requirements and precautions for when using Microsoft Windows or
®
Windows Internet Explorer, click "Manual" - "Open" from the supplied CD-ROM and refer to "Notes on Windows
®
/ Internet Explorer versions".
*6 Refer to our website (http://security.panasonic.com/support/info/) for latest information about the compatible SD
memory cards.
*7 When repeatedly recording images on an SD memory card using the auto overwrite function, make sure to use an
SD memory card with high reliability and durability.
*8 For further information about compatible devices, refer to our website
(http://security.panasonic.com/support/info/).
STANDARD ACCESSORIES
Installation Guide....................................................................................................1 set
IMPORTANT SAFETY INSTRUCTIONS ................................................................ 1 pc.
1
Warranty card* .......................................................................................................1 set
2
CD-ROM* .. ........................................................................................................... 1 pc.
3
Code label* .......................................................................................................... 1 pc.
*1 This product comes with several types of warranties. Each warranty is only applicable to the products purchased in the regions
indicated on the relevant warranty.
*2 The CD-ROM contains the operating instructions and different kinds of tool software programs.
*3 This label may be required for network management. Use caution not to lose this label.
The following parts are used during installation procedures.
Base bracket ......................................................................................................... 1 pc.
Attachment plate ................................................................................................... 1 pc.
Fixing screws for attachment plate (M4 × 8 mm {5/16 inches}) ..........................5 pcs. (of them, 1 for spare)
Template A (for the attachment plate) ...............................................................1 sheet
Template B (for the base bracket) .....................................................................1 sheet
Waterproof tape ..................................................................................................... 1 pc.
RJ45 waterproof connector cover ......................................................................... 1 pc.
RJ45 waterproof connector cap............................................................................ 1 pc.
Bit (Hex wrench, screw size 6.35 mm {1/4 inches} T20)....................................... 1 pc.
2P Power cable ..................................................................................................... 1 pc.
4P alarm cable. ..................................................................................................... 1 pc.
MONITOR OUT conversion plug........................................................................... 1 pc.
Auxiliary handle [WV-S2511LN ]........................................................................... 1 pc.
Waterproof tape Bit Auxiliary handle MONITOR OUT
conversion plug
LIMITATION OF LIABILITY
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-IN-
FRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO
THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING
PRODUCT (S).
DISCLAIMER OF WARRANTY
IN NO EVENT SHALL Panasonic i-PRO Sensing Solutions Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PER-SON,
EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CAS-ES,
INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEM-
PLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3) ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT
BY THE USER, REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE IN-
CLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED
BY THE DEVICES OF THIRD PARTY;
(6) ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATION AS A PHOTOGRAPHED SUBJECT
DUE TO VIOLATION OF PRIVACY CONCERNING A SURVEILLANCE CAMERA'S PICTURE OR SAVED DATA, FOR SOME REA-
SON (INCLUDING USE WHEN USER AUTHENTICATION ON THE AUTHENTICATION SETTING SCREEN IS SET TO OFF), BE-
COMING PUBLIC OR BEING USED FOR ANY PURPOSE;
(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE (INCLUDING INITIALIZATION OF THE PRODUCT DUE TO FORGOT-
TEN AUTHENTICATION INFORMATION SUCH AS A USER NAME AND PASSWORD).
PARTS AND FUNCTIONS
[Whole unit] * This illustration represents WV-S2531LN
Base bracket Conduit wiring
(accessory) connector
Enclosure Camera Attachment plate
(accessory)
Inner
cover
Dome cover Panning Fixing screws for attachment
Enclosure fixing Tilting table table screw plate (accessory)
screw (×4)
[Camera body] * This illustration represents WV-S2531LN
Direction marker for installation (TOP ) Two-dimensional barcode
Points up when installing (Data Matrix): To our website*1
to a wall.
Screen display Pan table fixing
top (TOP) screw with washer
Dehumidifying
device
Direction marker
for installation
(FRONT )
· FRONT must positioned
in front of the camera (on Water-proof rubber
the Panasonic logo side).
*1 Depending on the scanning application used, the Data Matrix may not be able to be read
correctly. In this case, access the site by directly entering the following URL.
http://security.panasonic.com/support/qr_sp_select/
1-1
Cables
LAN cable (category 5e
q RJ45 (female)Network cable or better, straight)
t 4P alarm cable
t Alarm input/output cable (accessory)
w 12 V DC power w 2P power 12 V DC (red)
supply terminal cable GND (black)
(accessory)
e Audio input cable (white)
r Audio output cable (black)
y MONITOR OUT terminal
(factory shipment: NTSC monitor)
q RJ45 (female) Network cable
Connect an Ethernet cable (category 5e or better) to the network connector.
IMPORTANT:
Use all 4 pairs (8 pins) of the Ethernet cable.
Make sure that the PoE device in use is compliant with IEEE802.3af standard.
When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
1-2
w 12 V DC power supply terminal / 2P power cable (accessory)
Caution:
A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE
EQUIPMENT POWERED BY 12 V DC POWER SUPPLY.
ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED
POWER SOURCE (IEC/EN/UL/CSA 60950-1).
Connect the output cable of the DC power supply to the power cable plug (accessory).
IMPORTANT:
Be sure to use the 2P power cable (accessory) provided with this product.
Be sure to fully insert the 2P power cable (accessory) into the 12 V DC power supply
terminal. Otherwise, it may damage the camera or cause malfunction.
When installing the camera, make sure that excessive force is not applied to the power cable.
Be sure to use an AC adaptor compliant with the Specifications (written in the indication label
on the bottom side of this unit) regarding power source and power consumption.
e Audio input cable (white)
Connect a microphone or the line out of an external device using a stereo mini plug (ø3.5 mm).
Input impedance: Approx. 2 k (unbalanced)
Recommended cable length: Less than 1 m {3.28 feet} (for microphone input)
Less than 10 m {32.8 feet} (for line input)
Recommended microphone: Plug-in power type (locally procured)
Supply voltage: 2.5 V ±0.5 V
Recommended sensitivity of microphone: 48 dB ±3 dB (0 dB=1 V/Pa,1 kHz)
Input level for the line input: Approx. 10 dBV
r Audio output cable (black)
Connect an external speaker* using a stereo mini plug (ø3.5 mm). (Audio output is monaural.)
Output impedance : Approx. 600 (unbalanced)
Recommended cable length : Less than 10 m {32.8 feet} *Use a powered speaker.
Output level : 20 dBV
Note:
The audio output can be switched to the monitor output. Refer to the "Operating Instructions" on the
provided CD-ROM for descriptions of how to switch the output.
IMPORTANT:
Connect/disconnect the audio cables and turn on the power of the camera after turning off
the power of the audio output devices. Otherwise, loud noise may be heard from the speaker.
Make sure that the stereo mini plug is connected to this cable. When a monaural mini plug is
connected, audio may not be heard.
When connecting a monaural speaker with amplifier, use a locally procured conversion cable
(mono-stereo).
1-3
t Alarm input/output cable / 4P alarm cable (accessory)
Note:
Off, input, and output of the external I/O terminal 2 and 3 can be switched by configuring the
setting. Refer to the Operating Instructions on the provided CD-ROM for further information
about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output"
or "AUX output").
ALARM IN1 (DAY/NIGHT IN , Auto time adjustment input), ALARM IN2, ALARM IN3
: No-voltage make contact input (4 V - 5 V DC, internally pulled up)
OFF : Open or 4 V - 5 V DC
ON : Make contact with GND (required drive current: 1 mA or more)
ALARM OUT, AUX OUT
: Open collector output (maximum applied voltage: 20 V DC)
ON : 4 V - 5 V DC by internal pull-up
OFF : Output voltage 1 V DC or less (maximum drive current: 50 mA)
4P alarm cable
GND (Black)
ALARM IN3 (Alarm input / AUX output) (Gray)
ALARM IN2 (Alarm input / Alarm output) (Red)
ALARM IN1 (Alarm input / Black & white input / Auto time adjustment input)
(Green)
IMPORTANT:
Install external devices so that they do not exceed the rating of the network camera.
When using the EXT I/O terminals as the output terminals, ensure they do not cause signal
collision with external signals.
y MONITOR OUT terminal (factory shipment: NTSC monitor)
Used to connect a monitor used for adjustments during installation or when performing service.
IMPORTANT:
The adjustment monitor is used for checking the adjustment of the angular field of view when
installing the camera or when servicing. It is not provided for recording/monitoring use.
Depending on the monitor, some characters (camera title, preset ID, etc.) may not be dis-
played on the screen.
1-4
When connecting to a network using a PoE hub
Before starting the installation, check the entire system configuration. The following illustration gives
a wiring example of how to connect the camera to the network via a PoE device (hub).
Powered speaker Adjustment monitor PoE device (hub)
Ethernet cable
(category 5e or better,
straight)
Microphone Ethernet cable
(category 5e or
better, straight)
Powered speaker PC
Ethernet cable
(category 5e or better,
straight)
Use an Ethernet cable (category
Microphone Adjustment monitor
5e or better, cross) when directly
connecting the camera to a PC.
IMPORTANT:
Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
If a PoE hub is not used, each network camera must be connected to a 12 V DC power
supply.
When using 12 V DC, power supply from a PoE hub or router is not required.
1-5
Indicators and buttons
q INITIAL SET button (Initializing / NTSC PAL switch button)
S2531L
y SD memory card warning/error indicator
e ACT indicator
w LINK indicator
r SD MOUNT indicator
t SD ERROR/AF indicator
!0 WIDE button
i AF button o TELE button
S2511L
SD memory card slot (SD)
u SD ON/OFF
button
q INITIAL SET button (Initializing / NTSC PAL switch button)
Follow the steps below to initialize the network camera.
Turn off the power of the camera. When using a PoE hub, disconnect the Ethernet cable from
the camera. When using an external power supply, disconnect the 2P power cable (accessory)
from the 12 V DC power supply terminal.
Turn on the power of the camera while pressing the INITIAL SET button, and make sure to
release the button after approximately 15 seconds. In about 2 minutes later, the camera will
start up and the settings including the network settings will be initialized. Retry if the camera
does not start up normally.
IMPORTANT:
When the camera is initialized, the settings including the network settings will be initialized.
Before initializing the settings, it is recommended to write down the settings in advance.
Do not turn off the power of the camera during the process of initialization. Otherwise, it may
fail to initialize and may cause malfunction.
When the INITIAL SET button is pressed (less than 1 second) to switch the output signal of the
MONITOR OUT terminal, the MONITOR OUT terminal can be switched for the NTSC monitor/
PAL monitor.
w LINK indicator
When data is being sent via the network camera Lights orange
e ACT indicator
When the camera is able to communicate with Blinks green (accessing)
the connected device
1-6
r SD MOUNT indicator
When an SD memory card is inserted and could Lights off Blinks green
be recognized Lights off
When data can be saved after the SD memory card is Lights off Lights green
inserted and the SD ON/OFF button is pressed
(less than 1 second)
When data can be saved to the SD memory card Lights green
When the SD memory card is removed after holding down Lights green Blinks green
the SD ON/OFF button (about 2 seconds) Lights off (recording)
Lights green Lights off
(waiting for recording)
When data cannot be saved to the SD memory card Lights off
because an abnormality was detected or the SD
memory card is configured not to be used
t SD ERROR/AF indicator
When AF (Auto Focus) operation is being executed Blinks red (Interval of 1 time/ second)
When the set is being started Lights red
When an SD memory card is recognized normally Lights red Lights off
When the SD card slot is not used or an abnormality is Lights red Stays red
detected in SD card after the camera has started
Note:
Lighting/blinking LED can be turned off with the software settings at any time. (The initial state is
lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation condi-
tions. ( Operating instructions included in the CD-ROM)
y SD memory card warning/error indicator
When a warning status is detected Lights red
*SD memory card warning detection conditions: After the total use time has exceeded 6 years
and the number of overwrite times has exceeded 2000.
When an error status is detected Blinks red
*SD memory card error detection conditions: Write error, read error, etc.
Note:
The default is off. According to the installation environment, set up with software as required.
( Operating instructions included in the CD-ROM)
u SD ON/OFF button
(1)When the SD ON/OFF button is pressed (less than 1 second), the SD MOUNT indicator lights
up in green and data can be saved to the SD memory card.
(2) When the SD ON/OFF button is held down (about 2 seconds), the SD MOUNT indicator lights
off and the SD memory card can be removed.
i Auto focus button (AF)
Used when adjusting the focus. Refer to the Installation Guide for details.
o TELE button [WV-S2531L]
Click the TELE button to adjust the zoom ratio to the "Tele" side.
!0 WIDE button [WV-S2531L]
Click the WIDE button to adjust the zoom ratio to the "Wide" side.
1-7
INSERT / REMOVE AN SD MEMORY CARD
Note:
Refer to the Operating Instructions on the provided CD-ROM for further information about the
SD memory card settings.
Insert an SD memory card
(1) Remove the enclosure from the camera, insert an SD memory card fully into the SD memory
card slot until a click is heard.
Insert the SD memory card with its label facing down
After the SD memory card has been inserted, press the SD ON/OFF button, and make
sure the SD MOUNT indicator is continually lit.
If you do not press the SD ON/OFF button after inserting the SD memory card, the SD
MOUNT indicator is automatically lit approximately 5 minutes later.
SD memory card
(with label facing down)
* This illustration represents
(2) Attach the enclosure to the camera. WV-S2511LN
Remove an SD memory card
When removing an SD memory card, reverse the procedure.
To remove the SD memory card, hold down the SD ON/OFF button for about 2 seconds.
When the flashing SD MOUNT indicator goes out, you can remove the SD memory card.
IMPORTANT:
Before turning off the camera power switch, make sure that the SD MOUNT indicator is
turned off. If you turn off the camera power switch while the SD MOUNT indicator is lit or
flashing, the recorded data may be corrupted or damaged.
Note:
When using an SD memory card, format it using this product. Recorded data on the SD memory
card will be deleted when formatted. If an unformatted SD memory card or an SD memory card
formatted with other devices is used, this product may not work properly or performance deteri-
oration may be caused. Refer to the operating instructions on the provided CD-ROM for how to
format an SD memory card.
When some SD memory cards are used with this product, the product may not work properly or
performance deterioration may be caused. Use the compatible SD memory cards.
1-8
WIRING DIAGRAM
E1
CAMERA UNIT Ass'y
HEATER BOARD Sensor Board
(COMPONENT SIDE)
CN704 RJ45 (female)
E4 Network cable
LAN CABLE Ass'y
Audio input
cable (White)
1
CN706
5 Audio output
CN601 cable (black)
E5
AUDIO MULTI CABLE Ass'y Alarm input/
output cable
1 7
LENS
12 V DC power
CN901 supply terminal
D903
SD memory card warning/
error Indicatot
D903
IR-LED L BOARD
(COMPONENT SIDE) IF BOARD
(PATTERN SIDE)
CN151
1
1
CN551 CN101
12
JK451
9
1
MONITOR OUT
3
terminal
JK451
CPU BOARD
E2
DEHUMIDIFYING
DEVICE 2
2
CN595
1
IR-LED R BOARD
(COMPONENT SIDE)
E3
2-pin
CABLE
(COMPONENT SIDE)
E6 (PATTERN SIDE)
3 1 57 1
CN902
FFC
56 2
SW1305 CN301
SD ON/OFF SW1302
switch TELE switch [WV-S2531L]
SW BOARD SW1303
SW1304 CN1301 WIDE switch [WV-S2531L] 1
SW1302 AF switch [WV-S2511L]
1 10
SW1305 SW1303 10 CN1001
2 1 CN1302 D1306 2 CN521 100 51 100
51
SW1304 D1306 D1307 9 CN302
AF switch SD ERROR/AF D1310 1 50 1 50 1
[WV-S2531L] indicator D1311
SW1306 CN501
D1307 INITIAL SET Switch
SD MOUNT indicator SW1306
D1310
LINK indicator
MO1 D1311
FAN ACT indicator
(PATTERN SIDE)
(COMPONENT SIDE)
2-1
OVERALL BLOCK DIAGRAM
CPU BOARD
Connector for ICE
25ppm
CLK Reset DCDC DCDC
24M WDT 5V->1.0V 5V->1.35V
Circuit
(core) (DDR3L)
2Gbit x2
800MHz (1600)
16bit x2
DDR3L
IR-LED R BOARD IR-LED L BOARD SoC (CPU-std)
Audio
FROM
(Built-in)
D903 MII 30ppm
SD memory card warning/ CLK
Analog IN
IR- LED IR- LED