Make | Model | Problem | Solution | Date |
| | | |
Found: 10
|
Orion | 14ARX | dead | IC101 µchip 5v supply low. C530 3µ3 250v on i/p to 5v reg IC105 u/s | 14-09-04 |
Orion | 14ARX | Dead 330K start up res ok STR50103 ok R532 hot | Check IC105 ( 5V reg ) & C530 ( 3.3uF ) 250V o/c | 14-09-04 |
Orion | 14ARX | Dead - R532 2k2 wirewound overheats | C530 3µ3 250v s/c | 14-09-04 |
Orion | 14ARX | Field rolling | IC401 TA8808N | 14-09-04 |
Orion | 14ARX | No st/by | C530 3µ3 250v by mains switch | 14-09-04 |
Orion | 14ARX | St/by only | No 103v HT tho' it did appear initially at sw on. IC401 no volts pin 40 as D403 9v1 zener s/c | 14-09-04 |
Orion | 14ARX | St/by only | Dis Q117 & if still doesn't come on sus STR50103 or series connected 330k resistors | 14-09-04 |
Orion | 14ARX | Stuck in StBy H.T. comes up then dies away | Check pin 40 IC401 for 9.1V if missing R458 & D403 | 14-09-04 |
Orion | 14ARX | This set was stuck in standby. For the rnicrocontr | C530 was open-circuit.. | 14-09-04 |
Orion | 14ARXG | Dead , channel display dies. | O.C. LINE DRIVE TX | 14-09-04 |