Make | Model | Problem | Solution | Date |
| | | |
Found: 10
|
ITT | 3447 Digi-3 | No picture - sound & EHT ok. | D771 s/c , R771 o/c. | 14-09-04 |
ITT | 3447 Digi-3 | No sound & blank raster - stuck in AV mode. | IC1401 pin 25 latched high. | 14-09-04 |
ITT | TX3446 | Blank raster | Comp vid present on dig vid board - ok entering VCU2100A vid codec chip but no o/p - chip faulty | 14-09-04 |
ITT | TX3446 | Dead - Chopper tr s/c & Fu01 shattered | C712 10µ 400v | 14-09-04 |
ITT | TX3446 | Line tearing & int sound mute | C209 10µ & C231 0µ47 in tuner | 14-09-04 |
Samsung | CF5344N | Field collapse & no sound | 12v supply to reg missing - cracks in print | 14-09-04 |
Samsung | CI5344 | Poor/no col, no or noisy sound or no sync Setting Option | Wrong Options set - to reset to UK standard - sw on at mains sw, use R/C to go to st/by, key in "display", "menu", "mute", & "standby" in quick succession to enter option set up. Set option for "CI", go to reset, Press "Vol Up" (the display will show "Wait for 5 secs"). Finally go to st/by | 14-09-04 |
Samsung | CI5344N | No control of col, contr, brill - dark pic | First switch on TV on BBC1. Press this in order STANDBY, DISPLAY, MENU,MUTE, AND STANDBY The tv will switch on with no sound.You must check these values
SCT = 16 SBT = 7 SCR = 5 Once these values have been entered select RESET mode. The TV will reset and then switch on. | 14-09-04 |
Samsung | CI5344N | No sound at sw on | Check values SCT=16, SBT=17 and SCR=5 in serv mode. Once entered select reset, TV resets
and switches on. | 14-09-04 |
Samsung | CI5344N | Service mode access | Switch to bbc1,press standby, display, menu, mute and standby. | 14-09-04 |