| Make | Model | Problem | Solution | Date |
| | | |
| Found: 14
|
| Alba | CTV3409 | Dead fuse ok Q801 s/c | Replace Q801 BUZ77, R809 0R47 ?w fusible, R805 330k 1W | 14-09-04 |
| Alba | CTV3409 11AK20S | LED stays green (pic ok) | Q803 BC547 st/by sw tr leaky | 14-09-04 |
| Amstrad | CTV1409 | Frame jitter. | R427 ( 220k ) replace with 180k | 14-09-04 |
| Hitachi | CL1409R | No colour | R519 100R 1/2w not properly soldered to board | 14-09-04 |
| Logik | 4090 TX90 | No colour | D103 ( BAV20 ) connected to pins 19 &23 of decoder IC. | 14-09-04 |
| Logik | 4090 TX90 | No colour with faint blue cast. | C157 ( 22nf ) leaky on pin 18 of IC103. | 14-09-04 |
| Logik | 4090 TX90 | No colour. | C157 , C159 ( 22nf ) o/c , D103 high or dry jointed. | 14-09-04 |
| Logik | 4090 TX90 | No sync. | C125 ( 2.7nf ) , C129 ( 68nf ) | 14-09-04 |
| Logik | 4094 TX95 | Tuning - no tuning. | R56 2.4k res o/c , IC 902 ( M293B1 ) on side board. | 14-09-04 |
| Matsui | 1409R | Dead apart from quiet tripping | R510/511 2M2 in psu o/c | 14-09-04 |
|
|
| Matsui | 1409R | Pin code reset | Input any 4 digit code 3 times until the screen displays ''protected''.Then hold ''volume down'' on TV and at the same time press button ''7'' on remote. | 14-09-04 |
| Nikkai | TLG1409 | Dead, squealing & heated smell | C617 4700pF 1kv split & leaky | 14-09-04 |
| Nikkai | TLG1409 | Dead. A squealing noise came from the chopper powe | C617 ( 4 , 700pF , IkV ) which had split open and was very hot. ( connected across the IO9V HT rectifier diode D116 , in series with | 14-09-04 |
| Nikkai | TLG1409 | Field collapse | R306 10R safety res o/c | 14-09-04 |